• Journal of Applied Biological Chemistry
• /
• v.58 no.2
• /
• pp.189-194
• /
• 2015

Ten compounds were isolated from the ethanolic extract of the leaves of Acacia catechu (Fabaceae), and their structures were identified as nine flavonoids [(+)-catechin (1), (-)-epicatechin (2), (+)-afzelechin (3), (-)-epiafzelechin (4), (+)-mesquitol (5), kaempferol (6), quercetin (7), quercetin 3-methyl ether (8), and caryatin (9)] and an ellagic acid (10). The chemical structures of these compounds were identified on the basis of spectroscopic methods (mass spectrometry, 1D and 2D nuclear magnetic resonance) and comparison with literature values. This is the first time that the isolation of caryatin (9) has been reported from Acacia genus.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.59-65
• /
• 2008

Six total mixed rations (TMR) containing 0, 4, 6, 8, 10, 12% tannin (TMR I-VI), using Accacia nilotica pods as a source of tannin, were used to study the effect of Acacia tannin on in vitro nutrient digestibility and gas production in goats. This study also investigated the degraded products of Acacia nilotica tannin in goat rumen liquor. Degraded products of tannins were identified using high performance liquid chromatography (HPLC) at different hours of incubation. In vitro digestibility of dry matter (IVDMD) and organic matter (IVOMD) were similar in TMR II, and I, but declined (p<0.05) thereafter to a stable pattern until the concentration of tannin was raised to 10%. In vitro crude protein digestibility (IVCPD) decreased (p<0.05) with increased levels of tannins in the total mixed rations. Crude protein digestibility was much more affected than digestibility of dry matter and organic matter. In vitro gas production (IVGP) was also reduced (p<0.05) with increased levels of tannins in the TMR during the first 24 h of incubation and tended to increase (p>0.05) during 24-48 h of incubation. Gallic acid, phloroglucinol, resorcinol and catechin were identified at different hours of incubation. Phloroglucinol and catechin were the major end products of tannin degradation while gallate and resorcinol were produced in traces. It is inferred that in vitro nutrient digestibility was reduced by metabolites of Acacia nilotica tannins and ruminal microbes of goat were capable of withstanding up to 4% tannin of Acacia nilotica pods in the TMR without affecting in vitro nutrient digestibility.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.789-793
• /
• 1995

Chemical composition was determined to renew interest in acacia flower as food. The moisture content was 86.60%. The chemical composition showed 24.55% of protein, 8.51% of ash, 40.97% of total sugar and 160.44mg% of ascorbic acid on dry matter basis, respectively. Free sugar was mainly composed of fructose, sucrose and glucose. In fatty acid composition, the ratio of saturated and unsaturated fatty acids was 1.7 : 1. The unsaturated acids were primarily composed of polyenoic acid by more than 90%. The amino acid was distributed with a ratio 0.32 of essential to total amino acids. Important elements of acacia flower were K, Mg, Ca, Fe, and Na. Flavor components such as 24.19% of octadecanoic acid, 9.41% of benzyl alcohol, 7.05% of linalool, 5.43% of heptacosane and 4.28% of geraniol were identified as major volatile compounds of acacia flower.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.226-235
• /
• 2020

In this paper, we present to evaluate physiological activity of Robinia pseudo-acacia leaf and its skin penetration using liposome and cell penetrating peptide. After extraction with Robinia pseudo-acacia leaf using the distilled water and supercritical, various physiological activities were examined. In antioxidants experiments, the total concentration of polyphenol compounds was determined to be 56.88 mg/g in hydrothermal extract, 45.07 mg/g in supercritical extract. The DPPH radical scavenging ability at 1,000 ㎍/mL was 33.97% in supercritical extract. The scavenging effect on SOD experiment at 500 ㎍/mL was 76.41% in supercritical extract. In the antimicrobial experiments, the hydrothermal extract had no effect, but supercritical extract represented maximum clear zone of 14.00 mm in Staphylococcus aureus strain. Liposome containing the RSE (Robinia pseudo-acacia leaf supercritical extract) reduced particle size and stabilized zeta potential. In the epidermal permeability experiment, it was confirmed that the permeation of liposome containing the RSE and cell penetrating peptides was remarkable.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.121-127
• /
• 2009

Acacia wood (Acacia mangium Willd.) is the most popular fast growing tree species planted in timber estate in Indonesia and is considered to be very valuable raw materials for structural composite products. The objective of the research was to evaluate the properties of OSB prepared from A. Mangium wood with or without immersing the strands to hot water at $80^{\circ}C$ for 2 hours. MDI adhesive was used in 3 levels i.e., 3%, 5%, and 7%. The moisture content of strand was 7%. The results indicated that immersing strands in hot water for 2 hours at $80^{\circ}C$ prior to manufacture OSB improved significantly the mechanical peoperties (i.e., MOR and MOE) of OSB. The higher the adhesive content resulted in the better the dimensional stabilisation (i.e., water absorption and thickness swelling) and the mechanical properties (i.e., MOR, MOE and IB) of OSB. OSB prepared from hot-water immersed strands with 5% adhesive content has met all parameters requirement on the JIS A 5908 (2003) standard.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.516-523
• /
• 2006

Marginal soils such as BRlS (Beach Ridges Interspersed with Swales) soils and ex-tin mining land make up approximately 0.5 million ha or about 2% of Malaysia's land area. In the coastal areas of the east coast of Peninsular Malaysia impoverished sandy BRIS dominates the landscape with most lying idle as there is no national management plan for their utilization. A field study was carried out to see whether mycorrhizal application had any effect on the growth of three exotic Acacia spp., i.e. Acacia auriculiformis, A. mangium and Acacia hybrid (A. auriculiformis ${\times}$ A. mangium) on BRIS soils. Two types of mycorrhizal inoculum, namely, a commercially available arbuscular mycorrhizal inoculum marketed as $MycoGold^{TM}$ and an indigenous ectomycorrhizal Tomentella sp. inoculum were tested. In the initial six months, height growth of all three tree species inoculated with the arbuscular mycorrhizal inoculum was significantly improved compared to the ectomycorrhizal inoculated and uninoculated control plants. The mycorrhizal effect was not evident thereafter and repeated application of the arbuscular mycorrhizal inoculum may be necessary for continued growth enhancement. Of the three species, A. mangium had the highest relative height growth rate over the 24 months on BRlS soils.

• Membrane and Water Treatment
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2024

Presence of hazardous dyes in water cause considerable risks to the human health and environment due to their potential toxicity and ecological disruptions. Therefore, in the present research, to suggest an alternative method for the retention of toxic Azocarmine G (ACG) dye from aqueous media, natural and H₂SO₄-modified acacia sawdust were performed for the first time as low-cost and efficient adsorbents. Based on batch experiments, it was determined that the best conditions for the developed dye retention process were an initial pH of 2.0 and an equilibrium time of 240 min. Analysis of the data using both pseudo-first order and pseudo-second order kinetic models showed that the retention of ACG onto the adsorbents predominantly occurred through chemical adsorption. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were employed to provide insights into the interaction between the adsorbate and adsorbent and the mechanism of the adsorption process. Maximum monolayer adsorption capacities of natural and H₂SO₄-modified acacia sawdust were determined as 28.01 and 64.90 mg g^-1, respectively by Langmuir isotherm model. Results of the study clearly indicated that the modification of acacia sawdust with H₂SO₄ leads to a substantial increase in the adsorption performance of anionic dyes.

• Natural Product Sciences
• /
• v.6 no.3
• /
• pp.139-141
• /
• 2000

From the $CHCl_3-fraction$ of the root cortex of Robinia pseudo-acacia, five compounds have been isolated. On the basis of spectral data, these compounds were identified as medicarpin, biochanin A, formononetin, 3'-methoxydaidzein.

• The Korean Journal of Ecology
• /
• v.21 no.6
• /
• pp.805-808
• /
• 1998

The methanolic crude leaf extract of Acacia melanoxylon shows inhibitory effects on seed germination, shoot growth, root growth and biomass of black gram (Phaseolus mungo L. Co 1) and weeds (Cassia occidentalis L. and Cyperus rotundus L.). The post emergence treatment was given on the 8th day after sowing and 4-6 days after seedling emergence. After postemergence treatment with 20% extract concentration, wilting symptoms appeared in P. mungo and C. occidentalis while necrosis occurred in C. rotundus. The seedling growth was inhibitory at all concentrations (5%, 10%, 20%) as compared to control plants. This inhibitory effect may be due to the presence of allelochemicals like phenolics in the A. melanoxylon leaves. Different types of phenolic acids were identified.

• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.125-130
• /
• 2013

An attempt was made on pulp production from the fast growing plant, Acacia hybrid to determine the total yield, screened yield, Kappa number, and fibre morphology of organosolv Acacia hybrid pulp. Uniform-sized chips were taken to undergo pulping in a digester with five different concentrations of ethanol, 50%, 60%, 70%, 80% and 90% (v/v) with 1 M of sodium hydroxide as catalyst. All chips were digested in a temperature-controlled digester with constant amount of water added and temperature of $185^{\circ}C$ with the duration of three hours cooking time and correspond pressure 1.1-1.2 MPa. It was observed that increasing of ethanol concentration has led to pulp yield increment and decreased in the degree of delignification at the same time. This study was aimed to focus on the effect of the varied concentration of organic solvent towards the pulp yield and its relationship with Kappa number and pulp yield.