• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.196-208
• /
• 1997

This study was performed to estimate quartz contents in the both bulk and airborne dust samples and to determine particle size distribution of airborne dust from the selected foundry operations. Total dust samples were collected by a 37mm cassette and respirable by a 10 mm nylon cyclone. Particle size distributions were determined by a Marple's 8-stage cascade impactor at the melting, molding, shakeout and finishing operations. The presence of elements in the dust samples were confirmed by the scanning electron microscopy equipped with the energy dispersive x-ray spectrometry. The quartz contents were estimated using the intensity of the absorption peak of quartz at 799 cm-l by the Fourie Transformed Infrared Spectroscopy (FTIR). The results were as follows: 1. The analysis of data from cascade Impactor showed bimodal distributions of particle size at the melting, molding and shakeout operations. Mass median aerodynamic diameters for the distributions determined by histogram were $0.48-1.65{\mu}m$ for small and $13.43-19.58{\mu}m$ for large modes. In the dust samples collected at the finishing operations, however, only a large mode of $18.89{\mu}m$ was found. 2. The percentages of total to respirable dust concentration calculated from the impactor data ranged from 42 % to 66 %. The average concentrations of respirable dust by cyclone were $0.85-1.28mg/m^3$ collected from the workers, and were $0.23-0.56mg/m^3$ from the areas surveyed. Dust concentrations of personal samples were statistically significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. 3. The mean percentages of silicon and oxygen estimated by SEM-EDXA in the bulk samples ranged from 35.83 % to 36.02 % and from 39.93 %-41.64 %, respectively. 4. The average quartz contents estimated by FTIR in the respirable dust from personal samples ranged from 4.32 % to 5.36 % and 4.54 % to 4.70 % in the bulk samples. No statistical difference of quartz content was found between foundry operations. In this study, quartz content was quantified by FTIR. Although no statistically significant difference in quartz content between airborne and bulk, samples and between different foundry operations was found, it is recommended that quartz content in the individual sample of respirable dust be analyzed and the results be used either to select an applicable quartz limits or to calculate the exposure limit. Further studies, however, are needed to compare the results by FTIR and XRD since it is reported that the quartz content determined by FTIR is different from that by XRD.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.6
• /
• pp.717-729
• /
• 1999

Although many studies on the cytotoxicity of the dental cast base metal alloys and their components have been carried out, the results are rather conflicting because of the different type of cells used and the various experimental procedures taken. Recently a number of scientists have claimed that it would be preferable to focus on the use of cells from relevant specific location of the human bodies. Consequently, the primary cultured oral keratinocyte derived from oral mucous along with nickel chloride and several of widely used dental cast base metal alloys(two Ni-Cr alloys and one Co-Cr alloy)in domestic were selected for this study, from which 1) The amounts of released metal ions were determined using atomic absorption spectrometry, 2) The cytotoxicity of nickel chloride and dental cast base metal alloys was evaluated via MTT assay, and finally, 3) The amounts of released metal ions and the cytotoxicity of nickel chloride were correlated with the cytotoxicity of dental cast base metal alloys And, the results were summarized as follows; 1. Nickel ion from Ni-Cr alloys and Cobalt ion from Co-Cr alloys resulted in maximum releasing rate during first 2h hours, followed by a decrease in releasing rate with time. Chromium ion were found to be minimal in all alloys. 2. In cytotoxic test. with $40{\mu}M,\;80{\mu}M$ of nickel chloride, there were observed an increase in the relative cell number compared to control samples after 24 hours. With $160{\mu}M$, there was found to be no difference in the relative cell number with control, except that 48 hour showed a increase in relative cell number. With $320{\mu}M$, the relative cell number remained constant and decreased after 48 hours, and with $640{\mu}M$, a continuing decrease in relative cell number was observed throughout test period. 3 The sensitivity of primary cultured oral epithelium to nickel was lower compared to the cells used in other studies. 4. CB-80 Soft and Regalloy showed no cytotoxicity to primary cultured oral epithelium and New crown resulted in a slight cytotoxicity. In conclusion, it was shown that the primary cultured oral keratinocytes could be applied successfully as testing cells in cytotoxicity test. Futhermore, the dental cast base metal alloys used in this study were found to be biocompatible.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.381-387
• /
• 2002

In this study, we introduced experience participated in ELPAT (Environmental Lead for Proficiency Analytical Testing) program that is administered by the American Industrial Hygiene Association and EPA. The 126 sample results of total 128 samples met reference value, as a result accepted 'proficient'. The concentration of Pb in air, paint chips, soils and dust wipes are $0.0089{\sim}0.3956mg/m^3$, 0.0500~8.9149%, 29.0${\sim}$1697 mg/kg and $18.00{\sim}900.3{\mu}g/sample$, respectively. The lead in environmental matrix prepared adequate techniques and analysed by flame atomic absorption spectrometry. The lead in air was extracted hydrochloric acid, in paint chips and soils were digested with microwave and hotplate and in dust wipes were prepared microwave digestion. No differences of each preparation techniques was found and all methods were to be proper.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.308-313
• /
• 2014

The effect of electrochemical characteristics of dye-sensitized solar cells (DSSC) upon employing multi-wall carbon nanotube (MWCNT) on both working electrode and counter electrode were examined with using EIS, J-V curves and UV-Vis absorption spectrometry. When 0.1 wt% of MWCNT was employed in the $TiO_2$-MWCNT composit on working electrode, the energy conversion efficiency increased about 12.5% compared to the $TiO_2$ only working electrode. The higher light conversion efficiency may attribut to the high electrical conductivity of MWCNT in $TiO_2$-MWCNT composite which improves the electron transport in the working electrode. However, higher amount of MWCNT than 0.1 wt% in the $TiO_2$-MWCNT composite decreases the light conversion efficiency, which is mainly ascribed to the decreased transmittance of light by MWCNT and to the decreased adsorption of dye onto $TiO_2$. The MWCNT employed counter electrode exhibited much lower light conversion efficiency of DSSC than the Pt-counter electrode, while the MWCNT-Pt counter electrode showed similar in light conversion efficiency to that of Pt-counter electrode.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.125-131
• /
• 2010

A bioequivalence study of LANIDIEM$^{(R)}$ tablet 4 mg (Samil. Co., Ltd.) to Vaxar$^{(R)}$ tablet 4 mg (GlaxoSmithKline Co., Ltd.) was conducted according to the guidelines of Korea Food and Drug Administration (KFDA). Forty healthy male Korean volunteers were enrolled in the study and thirty six volunteers completed the study according to the protocol. Thirty six volunteers received each medicine at the lacidipine dose of 4 mg in a $2{\times}2$ crossover study. There was one week wash-out period between the doses. Plasma concentrations of lacidipine were monitored by a high performance liquid chromatography - tandem mass spectrometry (LC-MS/MS) for over a period of 24 hours after drug administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 24 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for LANIDIEM$^{(R)}$/Vaxar$^{(R)}$ were log 0.8102~log 1.0417 and log 0.8493~log 1.1439, respectively. These values were within the acceptable bioequivalence intervals of log 0.80~log 1.25. Thus, our study demonstrated the bioequivalence of LANIDIEM$^{(R)}$ tablet 4 mg and Vaxar$^{(R)}$ tablet 4 mg with respect to the rate and extent of absorption.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.273-279
• /
• 1999

Forty plants used as tea materials were chosen for determining the contents of total phenolics, selenium (Se), ${\beta}-carotene$, ${\alpha}-tocopherol$ and ascorbate. Total phenolics and ascorbate contents were analyzed colorimetrically. The Se contents were measured by hydride-atomic absorption spectrometry. The contents of ${\beta}-carotene$ and ${\alpha}-tocopherol$ were simultaneously determined by high performance liquid chromatography using separate detectors, UV for ${\beta}-carotene$ and FL for ${\alpha}-tocopherol$ analyses. The contents of these antioxidants were as follows (per 100 g dry plant); Contents of total phenolics in green tea leaf, black tea leaf, oolong tea leaf and instant coffee were about 7 g and the Se contents in corni fructus and arrowroot were found to be about $4{\mu}g$, which were the highest among all plants used. Contents of ${\beta}-carotene$ in eucommiae cortex, persimmon leaf and green tea leaf were 8587, 6222 and $3652\;{\mu}g$ respectively. The persimon leaf contained the highest ${\alpha}-tocopherol$ content (33 mg) and then followed by eucommiae cortex (26 mg), green tea leaf (16 mg) and black tea leaf (13 mg) in order. Ascorbate contents were found to be high in green tea leaf (199 mg) and black tea leaf (117 mg).

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.649-654
• /
• 1994

In order to provide a quality index of Korean folk sojues, physicochemical properties of Korean folk sojues (Andong soju, Moonbaesul, Leekangju, Jindo Hongju, Chebiwon soju, Yethyang (rice) and Yethyang (barley)), Paekrosul, Chinese kaoliangchiews (Moutaichiew, Ergoutoutiu, Chuyehchingchiew, Zhikukaoliangchiew and Paigal), Japanese Senbatanuki shochu and two whiskies were determined. The pH of sojues ($3.43{\sim}5.85$) were mainly influenced by total acidity which was described as acetic acid. The conductivities of Paekrosul and Leekangju showed relatively high value of $246\;and\;122.7{\mu}S/cm$, respectively. Korean folk sojues and Paekrosul showed maximum absorption at 274 or $278{\sim}280nm$ in the spectrometric study. We performed principal components analysis (PCA) of physicochemical properties and spectrometric data to extract representative characteristics and to compare the similarity or the dissimilarity. The PCA plot showed the distinguished cluster of Korean folk sojues comparing with Chinese kaoliangchiew or Paekrosul etc.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.6
• /
• pp.421-427
• /
• 2008

The purpose of the present study was to evaluate the bioequivalence of two etodolac capsules, Kuhnillodin capsule (Kuhnil. Co., Ltd., Seoul, Korea) as reference drug and Etodin capsule (Myungmun Pharm. Co., Ltd., Seoul, Korea) as test drug, according to the guidelines of Korea Food and Drug Administration (KFDA). Twenty-three healthy male Korean volunteers received one capsule at the dose of 200 mg etodolac in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of etodolac were monitored by a high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) for over a period of 24 hr after the administration. $AUC_{0-24\;hr}$ was calculated by the linear trapezoidal rule method. $C_{max}$ and $T_{max}$ were compiled from the plasma concentration-time data. Analysis of variance (ANOVA) was carried out using logarithmically transformed $AUC_{0-24\;hr}$ and $C_{max}$. The 90% confidence intervals of the $AUC_{0-24\;hr}$ ratio and the $C_{max}$ ratio for Etodin/Kuhnillodin were $\log\;0.97{\sim}\log\;1.08$ and $\log\;0.89{\sim}\log\;1.19$, respectively. These values were within the acceptable bioequivalence intervals of $\log\;0.80{\sim}\log\;1.25$. Thus, our study demonstrated that Etodin was bioeqiovalent to Kuhnillodin preparation when the rate and extent of absorption between two preparations were compared.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.389-400
• /
• 2011

A high-performance liquid chromatographic (HPLC) method was developed to determine residues of phenothrin and silafluofen, known as synthetic pyrethroids, in agricultural commodities. Insecticide residues were extracted with acetone from representative samples of four crops which comprised rice, apple, pepper and cabbage. The extract was purified serially by liquid-liquid partition and Florisil column chromatography. For rice and pepper samples, acetonitrile/n-hexane partition was additionally adopted to remove nonpolar interferences. Reversed phase HPLC using an octadecylsilyl column was successfully applied to separate two phenothrin isomers and silafluofen from sample co-extractives. Intact parent compounds were sensitively detected by ultraviolet absorption at 226 nm. Recovery experiment at the quantitation limit validated that the proposed method could apparently determine phenothrin and silafluofen residues at 0.02 and 0.01 mg/kg, respectively. Mean recoveries of phenothrin and silafluofen from four crop samples fortified at three levels in triplicate were in the range of 82.4~109.8% and 83.7~109.8%, respectively. Relative standard deviations of the analytical method were all less than 10%, irrespective of crop types and spiking levels. A selected-ion monitoring (SIM) LC/mass spectrometry (MS) with electrospray ionization was provided to confirm the suspected residue of phenothrin, even though no sufficient ionization of silafluofen was obtained. Both phenothrin and silafluofen could be successfully confirmed by gas chromatography/MS SIM with electron impact at 70 eV. The proposed method is sensitive, repeatable and rapid enough to apply to officially routine inspection of agricultural products.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.555-566
• /
• 1987

Fifty ancient Korean coins originated in Yi Dynasty have been determined for 9 elements such as Sn, Fe, As, Ag, Co, Sb, Ir, Ru and Ni by instrumental neutron activation analysis and for 3 elements such as Cu, Pb, and Zn by atomic absorption spectrometry. Bronze coins originated in early days of the dynasty contain as major constituents Cu, Pb and Sn approximately in the ratio 90 : 4 : 3, whereas, those in latter days contain in ratio 7 : 2 : 0. Brass coins which had begun in 17 century contain as major constituents Cu, Zn and Pb approximately in the ratio 7 : 1 : 1. The multivariate data have been analyzed for the relation among elemental contents through the variance-covariance matrix. The data have been further analyzed by a principal component mapping method. As the results training set of 8 class have been chosen, based on the spread of sample points in an eigen vector plot and archaeological data such as age and the office of minting. The training set and test set of samples have finally been analyzed for the assignment to certain classes or outliers through the statistical isolinear multiple component analysis (SIMCA).