• Journal of Aquaculture
• /
• v.22 no.1
• /
• pp.105-111
• /
• 2009

In this study, we carried out an experiment for estimation the larval digestibility in aspects which digestive enzymatic activities and nutrition of the rotifers, Brachionus rotundiformis. Thus we enhanced the digestive enzymatic activity through the addition of starch for the increase of digestibility of rotifer (starch-rotifer), and compared with the feed efficiency through rearing of the olive flounder, Paralichthys olivaceus used rotifer lipid-enriched with Algamac $2000^{(R)}$ (CE-rotifer). The digestive enzyme activities (except for TG-lipase), total protein contents, total essential amino acid, essential amino acids (methionin and phenylalanine) of starch-rotifer (the rotifer used a starch as additive, and enriched not) was assayed significantly higher than CE-rotifer (P<0.05). And total lipid, lipid classes (except for sterol) and fatty acids as DHA and EPA showed higher in CE-rotifer than starch-rotifer (P<0.05). But, sterol contents and ST/TG ratio were shown significantly higher in starch-rotifer (P<0.05). The flounder larvae supplied the two rotifers showed standard length and body weight that not significantly differed with ranges $3.72{\sim}3.79\;mm$ and $32.9{\sim}37.8\;mg$/larva on 6 days after hatching (DAH), respectively (P>0.05). However, these of 12 DAH showed the values of significantly higher to $5.94{\pm}0.249\;mm$, $144.0{\pm}23.86\;mg$/larva and $26.2{\pm}12.13%$ in standard length, body weight and survival in CE-flounder than that of starch-flounder (P<0.05). The hydrolytic enzymatic activities of flounder larvae severally supplied the two rotifers showed the significantly higher activities in acidic -amylase, neutral -amylase, TG-lipase, lysozyme and acidic phosphatase in starch-flounder on 5 DAH (P<0.05). But neutral $\alpha$-amylase, three proteases and two phosphatases of CE-flounder on 11 DAH showed the significantly higher activities than that of starch-flounder (P<0.05). Therefore, for the flounder, Paralichthys olivaceus larvae just depleted yolk was more beneficial to supply the feed, rotifer, enhanced the digestibility than to supply the feed lipid-enriched for aspect of larval digestibility up to 6 DAH, thereafter nutrition of absorption due to the development of digestive organs suggested that enrichment effect appeared with larval somatic growth. Consequently, investigation more detailed about the larval digestive physiological and nutritional requirement variations after 6 DAH will be necessary, thereafter.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.48-54
• /
• 2006

This study was conducted to investigate the effect of calcium and boron intakes on calcium utilization in ovariectomized (OVX) rats. Rats were divided into 9 groups and fed diets containing various levels of calcium $(0.1\%,\;0.5\%,\;1.5\%)$ and boron (0.5 ppm, 50 ppm, 100 ppm) for 4 weeks. The half of rats in each group were ovariectomized and the others were sham-operated. Rats were fed same diets for 8 weeks after operation. Feed intake and weight gain were significantly increased as the dietary calcium was increased and those of OVX group were higher than in sham-operated group. Feed efficiency ratio was significantly higher in OVX group than that in sham-operated one. With boron supplementation, serum calcium level was significantly increased in low-calcium group, but decreased in adequate/high-calcium group. In calcium balance, calcium intake was significantly increased with increasing levels of calcium and boron and higher in OVX group than that in sham-operated one. With increasing calcium intake, fecal and urinary calcium excretions were significantly increased. Urinary calcium excretion was significantly decreased with increment of boron intake. Apparent calcium absorption of adequate-calcium OVX group was the highest among the groups. Daily calcium retention was significantly increased as the dietary calcium was increased and that of high-calcium OVX group was higher than high-calcium sham-operated group. According to these results, the boron supplementation increased the calcium intake and decreased the urinary calcium excretion. Therefore, it could be suggested that the boron supplementation may be complementary to calcium nutrition and useful for bone health.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.721-726
• /
• 2010

The objective of this study was to evaluate several varieties of aseptic-packaged cooked rice including Juanbyeo. Quality evaluations, such as by amylose, setback, toyo values and amylograms, were significantly higher in the Juanbyeo as compared to other samples. In addition, the Juanbyeo aseptic-packeged cooked rice showed significantly higher palatability characteristics and had a greater water absorption ratio than the other samples. For cold cooked rice, the relationship between palatability and texture was significantly high (p<0.01). Ilpumbyeo showed high scores for taste as a hot cooked rice, but as a cold cooked rice taste scores were lower than other samples. In the case of Juanbyeo cold cooked rice flavor was improved. When the Juanbyeo aseptic-packaged cooked rice was reheated in a microwave oven, it had better palatability than other varieties. Thus, the results of this study suggested that Juanbyeo can be effectively utilized as aseptic-packaged cooked rice.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.265-285
• /
• 1999

The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.463-474
• /
• 2011

The Haenam epithermal mineralized zone is located in the southwestern part of South Korea, and hosts low sulfidation epithermal Au-Ag deposit (Eunsan-Moisan) and clay quarries (Okmaesan, Seongsan, and Chunsan). Epithermal deposits and accompanying hydrothermal alteration related to Cretaceous volcanism caused large zoned assemblages of hydrothermal alteration minerals. Advanced argillic-altered rocks with mineral assemblages of alunite-quartz, alunite-dickite-quartz, and dickite-kaolinite-quartz exposed on the Okmaesan, Seongsan, and Chunsan area. Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), with three visible and near infrared bands, six shortwave infrared bands, and five thermal infrared bands, was used to identify advanced argillic-altered rocks within the Haenam epithermal mineralized zone. The distinct spectral features of hydrothermal minerals allow discrimination of advanced argillic-altered rocks from non-altered rocks within the study area. Because alunite, dickite, and kaolinite, consisting of advanced argillic-altered rocks within the study area are characterized by Al-O-H-bearing minerals, these acid hydrothermal minerals have a strong absorption feature at $2.20{\mu}m$. The band combination and band ratio transformation cause increasing differences of DN values between advanced argillic-altered rock and non-altered rock. The alunite and dickite-kaolinite of advanced argillic-altered rocks from the Okmaesan, Seongsan, and Chunsan have average DN values of 1.523 and 1.737, respectively. These values are much higher than those (1.211 and 1.308, respectively) of non-altered area. ASTER images can remotely provide the distribution of hydrothermal minerals on the surface. In this way good relation between ASTER spectra analysis and field data suggests that ASTER spectral analysis can be useful tool in the initial steps of mineral exploration.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.355-364
• /
• 2004

A study on the weathering grade classification has been performed for granite and granite gneiss in Korea. The qualitative classification criteria of weathering were reviewed and then modified with field studies for the weathered rock masses. The thin section observations and XRD analyses for the different weathering grades rock samples showed the petrographical and petrophysical difference with respect to the weathering : the proportion of weathering-resistant minerals suck at quartz and orthoclase has a tendency to increase with the development of weathering, but that of weathering-sensible minerals such as anorthite and biotite is decreased. The ranges of physical and mechanical rock properties for different weathering grades were obtained from the laboratory rock tests and field tests for the studied rocks. And then, along with $RDI_{sq}$(Fookes et al., 1988), the weathering index $I_{a}$, (Woo, 2003) has been developed in this study to demarcate the weathering grade. Those two indices rely mainly on the water absorption ratio of rock and on the different rock strength. The range of these weathering indices have been determined with the physical and mechanical rock properties that can be obtained from simple field or laboratory tests in 4 grades $I_{a}$＞ 7 for F, 3.5 ＜ $I_{a}$ ＜ 10 for SW, 1.0 $I_{a}$＜ 6.0 for MW and $I_{a}$＜ 2.5 for HW. Consequently, the weathering index could be utilized to classify quantitatively the rock weathering grade, especially for the studied granites and the granite gneiss in Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.668-673
• /
• 2010

A new black seed coat soybean cultivar, 'Heugseong' was developed at the National Institute of Crop Science (NICS) in 2008. The goal to breed the black seed coat soybean is to develop the cultivar with large seed size, high yield, lodging tolerance, and resistance to disease such as soybean mosaic virus (SMV), and bacterial pustule. 'Heugseong' was selected from the cross between 'Gnome85', showing yellow seed coat, lodging tolerance, and high yield, and 'Cheongja', showing green cotyledon, and black seed coat. The preliminary, advanced and regional yield trials for this cultivar were carried out from 2004 to 2008. It has determinate growth habit, purple flower, brown pubescence, brown pod color, black seed coat, yellow cotyledon, elongated seed shape, oval leaf shape and large seed size (29.2 grams per 100 seeds). It was 4 days later in maturity than the check cultivar 'Ilpumgeomjeongkong'. 'Heugseong' was better than the check cultivar in the seed quality of isoflavone contents(1,913 ${\mu}g/g$). It has good adaptability for cooking with rice in ratio of water absorption and seed hardness, for physics of black tofu, and for fermented black soybean paste. The average yield of 'Heugseong' was 2.37 ton per hectare in the regional yield trials carried out in six locations of Korea from 2006 to 2008.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.404-412
• /
• 2011

The purpose of this study is to prepare extruded rice flours suitable for baking rice cookies. The extruded rice flours were prepared at 100 and 130$^{\circ}C$ temperature and 25 and 27% moisture content in a co-rotating twin screw extruder. The rice extrudates were dried at 100$^{\circ}C$ for 18 hr and subsequently ground into the fine flour. Characteristics of the extruded rice flours were examined by rapid visco analysis, hydration property analysis, differential scanning calorimetry (DSC), and in vitro digestion test. Water absorption, solubility, and swelling power of all extruded rice flours were higher than those of native rice flour. DSC analysis showed that native rice flour had a peak at about 65$^{\circ}C$ while all extruded rice flours did not show any peaks since they were already gelatinized during the extrusion proess. Viscosity of the extruded rice flours decreased with increasing temperature and lowering moisture content in the extrusion proess. The extruded rice flours prepared at 130$^{\circ}C$ exhibited lower viscosity than those prepared at 100$^{\circ}C$. The operating temperature of the extrusion proess was critical for the starch digestion in vitro. The extruded rice flours prepared at 130$^{\circ}C$ showed a rapid decrease in digestible starch content while an increased level of slowly digestible starch content was observed compared to those treated at 100$^{\circ}C$ in the extruder. Cookies were prepared with a mixture of wheat flour and extruded rice flours at the ratio of 7 to 3. The cookies made with the extruded rice flours had lower spread factor and darker yellow color than those prepared with wheat flour only. Hardness of the extruded rice flour-added cookies was similar to that of the wheat flour cookie whereas their overall acceptance was better. Therefore the rice cookies partially supplemented with extruded rice flours may have a potential as early childhood foods which require soft texture and allergy reduction.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.267-271
• /
• 2010

A new black seed coat soybean cultivar, 'Daeheug', was developed at the National Institute of Crop Science (NICS) in 2007. The breeding goal for black seed coat soybean is to develop the cultivar with large seed size, high yield, lodging tolerance, and resistance to disease such as soybean mosaic virus (SMV), and bacterial pustule. 'Daeheug' was selected from the cross between 'Daehwang' which had yellow seed coat, large seed size, and late maturity, and 'Milyang 79' which was lodging tolerant, and SMV resistant with medium seed size, black seed coat, and yellow cotyledon. The preliminary, advanced and regional yield trials for evaluation and selection of this cultivar were carried out from 2003 to 2007. It has determinate growth habit, purple flower, brown pubescence, brown pod color, black seed coat, yellow cotyledon, spherical flattened seed shape, oval leaf shape and large seed size (34.3 g/100 seeds). In maturity, 'Daeheug' was 2 days later than the check cultivar 'Ilpumgeomjeongkong'. In the seed quality such as isoflavone contents ($635{\mu}g/g$), and anthocyanin contents ($11.2m{\ell}/g$ of seed coat), 'Daeheug' was better than the check cultivar. It has good adaptability for cooking with rice in ratio of water absorption and seed hardness. Specially, it has good processability for soybean tea with 2.13 absorbance at 530 nm, scavenge activity of DPPH radical was high, and contents of total phenolics was $1,263{\mu}g/m{\ell}$. The average yield of 'Daeheug' was 2.26 ton per hectare in the regional yield trials (RYT) carried out in six locations of Korea from 2005 to 2007.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.108-125
• /
• 2013

This study examined the actual reconstruction drawing, composite mineral, particle size and property test, fine organic matters, color differences and main ingredients of the earthen mold excavated in Dongcheon-dong, Gyungju. The cross-section of the inner mold and outer mold divides into inside (1st layer) and outside (2nd layer), with organic matters mixed outside. The cross-section has been altered due to heat and form removal agent. X-ray analysis revealed that the layer was made of minerals with high transmissivity and only quartz particles were observed through a polarizing microscope. The inside of cross-section in SEM observation identified enlarged air gap, with crack developed in the center, but no changes observed on the outside. The particle size of the composites is almost the same for the inner mold and outer mold and is silt clay loam. The ratio between silt clay and silt clay loam was about 2.7:1 and 2.9:1 respectively. In the property test, the density and absorption rate of inner mold and outer mold were similar, but porosity was different, with inner mold of 27.36% and outer mold of 31.09%. The color difference of cross-section seems to have been caused by the spread of soot on the 1st layer surface for removal of form or by the covering of ink to protect the 1st layer. Composite mineral analysis revealed the same composition for the inner mold and outer mold, except for the magnetite that was detected in the inner mold alone. As for the main ingredient analysis, the average content of $SiO_2$ was 71.64% and that of $Al_2O_3$ was 14.59%. As for the sub-ingredients, $Fe_2O_3$ was 4.51%, $K_2O$ 3.06%, $Na_2O$, MgO, CaO, $TiO_2$, $P_2O_5$ and MnO was less than 2%.