• 한국의류학회지
• /
• 제42권3호
• /
• pp.503-515
• /
• 2018

In this research, the three-dimensional structural and colorimetrical modeling of yarn-dyed woven fabrics was conducted based on the Kubelka-Munk theory (K-M theory) for their accurate color predictions. In the K-M theory for textile color formulation, the absorption and scattering coefficients, denoted K and S, respectively, of a colored fabric are represented using those of the individual colorants or color components used. One-hundred forty woven fabric samples were produced in a wide range of structures and colors using red, yellow, green, and blue yarns. Through the optimization of previous two-dimensional color prediction models by considering the key three-dimensional structural parameters of woven fabrics, three three-dimensional K/S-based color prediction models, that is, linear K/S, linear log K/S, and exponential K/S models, were developed. To evaluate the performance of the three-dimensional color prediction models, the color differences, ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and ${\Delta}E_{CMC(2:1)}$, between the predicted and the measured colors of the samples were calculated as error values and then compared with those of previous two-dimensional models. As a result, three-dimensional models have proved to be of substantially higher predictive accuracy than two-dimensional models in all lightness, chroma, and hue predictions with much lower ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and the resultant ${\Delta}E_{CMC(2:1)}$ values.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.651-657
• /
• 2010

Previous experimental results performed by many researchers for a couple of decades in South Korea have shown that an absorbing sheet inserted in a conventional floating slab system for thermal insulation or vibration absorption may amplify the vibration of the slab system at specific frequency ranges depending on the material properties of the sheet. The amplified vibration, consequently, results in the heavy weight floor impact noise exceeding the sound level limit for an apartment house, 50 dB. In this study, the amplification mechanism is examined through numerical analysis and a new slab system is proposed to reduce the amplification and control the noise. The new slab system consists of studs connecting the base slab and upper concrete finishing yielding the dramatically increased stiffness of the slab. The numerical simulation is performed to investigate the effect of the slab system with studs on the vibration and noise control. The results show that the performance of the slab is sensitive to the number and location of studs, and the heavy weight floor impact noise can be reduced up to 6~7 dB compared to the conventional slab system at the optimal stud location.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권3호
• /
• pp.195-202
• /
• 2006

하수시설 콘크리트의 열화현상은 하수시설의 특수한 환경조건상 황산화세균 등의 서식에 의해 발생된 황화수소($H_2S$)에 기인하는 생화학적 부식이 대표적인 것으로 알려져 있으나, 국내의 경우 근본적으로 방지대책이 전혀 고려되지 않은 채 정비사업이 수행되고 있어 근본적으로 황산화세균을 억제할 수 있는 보수재료 공법의 개발이 시급히 필요한 실정이다. 이에 본 연구에서는 항균금속을 포함한 도포형 항균제를 개발한 후, 개발된 항균제의 황산화세균에 대한 항균성능과 항균제를 도포한 단면복구재의 부착강도, 흡수 및 투기저항성, 중성화 깊이, 염화물이온 침투깊이 및 화학저항성 등의 기초물성을 평가하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.14-23
• /
• 2018

$TiO_2-coated$ cubic ${\alpha}-Fe_2O_3$ with mostly exposed (012) and (101) facets (${\alpha}-Fe_2O_3@TiO_2$) was fabricated using a hydrothermal route for the photo-Fenton degradation of tetracycline under visible light irradiation. $TiO_2$ coating could greatly affect the photocatalytic activity of ${\alpha}-Fe_2O_3@TiO_2$. Compared with cubic ${\alpha}-Fe_2O_3$ alone for photodegradation of tetracycline, ${\alpha}-Fe_2O_3@TiO_2$ with $TiO_2$ shell of around 15 nm exhibited higher removal efficiency of tetracycline in photo-Fenton system, and its durability was slightly affected after five cycle times under same conditions. It is ascribed to the well-matched interface between cubic ${\alpha}-Fe_2O_3$ core and $TiO_2$ shell, leading to the broadened light-absorption and the efficient separation of photo-generated electon-hole pairs. The $^{\bullet}OH$ radicals were main responsible for the advanced photocatalytic performance of ${\alpha}-Fe_2O_3@TiO_2$ in visible-light driven degradation of tetracycline.

• 화훼연구
• /
• 제18권1호
• /
• pp.66-72
• /
• 2010

본 실험은 절화장미 중 만개시의 꽃의 크기, 밀집도, 개화 시 꽃의 모양, 꽃잎의 단아함, 염색 시 색발현 등이 양호한 'Akito' 품종을 대상으로 단색염색을 위한 최적조건을 규명하고자 실시하였다. 염료용액의 pH가 3.5, 염료의 온도가 $20-25^{\circ}C$일 때 염료의 착색과 흡수속도가 가장 빨랐으며 절화수명 또한 15일로 가장 길었다. 염색을 위한 꽃의 개화 정도는 꽃잎이 3장 이상 핀 상태인 2~3단계에서 Pantone color, 염색 후 꽃의 품질및 절화수명이 양호하였다. 염색액의 처리 시 실내온도는 $10^{\circ}C$의 비교적 저온에서 흡수가 양호하였다. 염색용액의 농도는 $10g{\cdot}L^{-1}$ 처리했을 때 가장 선명한 색상을 나타내었으며 염색액의 흡수를 촉진시키기 위한 전착제 처리는 $2mL{\cdot}L^{-1}$를 사용하는 것이 가장 적절한 것으로 판단된다.

• 대한원격탐사학회지
• /
• 제17권4호
• /
• pp.285-295
• /
• 2001

We developed a CASE-II water model that will enable the simulation of remote sensing reflectance($R_{rs}$) at the coastal waters for the retrieval of suspended sediments (SS) concentrations from satellite imagery. The model has six components which are: water, chlorophyll, dissolved organic matter (DOM), non-chlorophyllous particles (NC), heterotrophic microorganisms and an unknown component, possibly represented by bubbles or other particulates unrelated to the five first components. We measured $R_{rs}$, concentration of SS and chlorophyll, and absorption of DOM during our field campaigns in Korea. In addition, we generated $R_{rs}$ from different concentrations of SS and chlorophyll, and various absorptions of DOM by random number functions to create a large database to test the model. We assimilated both the computer generated parameters as well as the in-situ measurements in order to reconstruct the reflectance spectra. We validated the model by comparing model-reconstructed spectra with observed spectra. The estimated $R_{rs}$ spectra were used to (1) evaluate the performance of four wavelengths and wavelengths ratios for accurate retrieval of SS. 2) identify the optimum band for SS retrieval, and 3) assess the influence of the SS on the chlorophyll algorithm. The results indicate that single bands at longer wavelengths in visible better results than commonly used channel ratios. The wavelength of 625nm is suggested as a new and optimal wavelength for SS retrieval. Because this wavelength is not available from SeaWiFS, 555nm is offered as an alternative. The presence of SS in coastal areas can lead to overestimation chlorophyll concentrations greater than 20-500%.

• 한국추진공학회지
• /
• 제18권5호
• /
• pp.95-100
• /
• 2014

극초음속 비행체에서는 공기와의 마찰열과 엔진열의 증가로 기체 내부의 열적 부하가 발생한다. 이는 비행체 내부 구조물의 변형을 일으키고 오작동을 발생시킬 수 있다. 흡열연료는 액체 탄화수소 연료로써 흡열반응을 통해 열을 흡수할 수 있는 연료이다. 본 연구에서는 exo-tetrahydrodicyclopentadiene을 모델연료로써 선정하고 제올라이트 촉매의 금속담지를 통하여 흡열특성의 변화를 측정하는 연구를 수행하였다. 이를 통하여 상용촉매보다 우수한 흡열성능을 가지는 촉매를 확보하였다. 본 연구의 목적은 흡열량 향상에 미치는 촉매의 특성을 연구하는 것이다. 이 촉매는 상용촉매를 대체하여 exo-THDCP를 흡열연료로 사용하는 시스템에 적용될 수 있을 것이다.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• 항공우주시스템공학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2018

본 연구에서는 기존의 하중제어기법을 보완한 하이브리드 제어기법을 제안하였다. 제안된 하이브리드 제어기법은 기존 하중제어기법에서 발생하는 채터링 현상을 제거하고, 높은 충격흡수효율을 얻을 수 있는 제어기법이다. 제어기 설계를 위해 MR댐퍼가 적용된 착륙장치를 구성하고, 착륙장치의 운동방정식을 유도하였다. 다물체 동역학 해석 소프트웨어인 RecurDyn을 이용하여 시뮬레이션 모델을 구성한 후 하이브리드 제어기를 설계하였다. 본 연구의 하이브리드 제어기는 스카이 훅 제어기를 기반으로 최대 스트럿 하중과 변위를 줄일 수 있으며, 부가되는 하중제어 기법을 통해 고효율의 제어기법을 구현할 수 있다. 채터링 방지를 위해 효율적인 제어기법 스위칭과 입력설계(Input Shaping) 기법을 적용하여 낙하 시뮬레이션을 수행하였고, 각각의 결과를 비교하여 착륙 특성에 대해 성능평가를 수행하였다.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.340-347
• /
• 2021

Among various metal oxide semiconductors, ZnO has an excellent electrical, optical properties with a wide bandgap of 3.3 eV. It can be applied as a photocatalytic material due to its high absorption rate along with physical and chemical stability to UV light. In addition, it is important to control the morphology of ZnO because the size and shape of the ZnO make difference in physical properties. In this paper, we demonstrate synthesis of size-controlled ZnO tetrapods using an atmospheric pressure plasma system. A micro-sized Zn spherical powder was continuously introduced in the plume of the atmospheric plasma jet ignited with mixture of oxygen and nitrogen. The effect of plasma power and collection sites on ZnO nanostructure was investigated. After the plasma discharge for 10 min, the produced materials deposited inside the 60-cm-long quartz tube were obtained with respect to the distance from the plume. According to the SEM analysis, all the synthesized nanoparticles were found to be ZnO tetrapods ranging from 100 to 600-nm-diameter depending on both applied power and collection site. The photocatalytic efficiency was evaluated by color change of methylene blue solution using UV-Vis spectroscopy. The photocatalytic activity increased with the increase of (101) and (100) plane in ZnO tetrapods, which is caused by enhanced chemical effects of plasma process.