• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.273-279
• /
• 2017

Curcumin have various health-beneficial properties in numerous studies. However, its bioavailability is low due to its limited intestinal uptake and rapid metabolism. This study aimed to evaluate the pharmacokinetics of newly developed sub-micron particle curcumin with increased water dispersibility (Theracurmin(R) CR-033P). Plasma curcumin levels were measured at 0, 1, 2, 4, 8 h after Theracurmin(R) CR-033P intake using high-performance liquid chromatography. For analyzing pharmacokinetics of Theracurmin(R) CR-033P, eighteen healthy subjects were recruited and received Theracurmin(R) CR-033P at a single oral dose containing curcumin 30 mg. $C_{max}$ was 28.14 ng/ml, and the area under the curve for 8 h was estimated to be 104.36 ng/ml. Based on the area under the plasma concentration (AUC), the bioavailability of sub-micron particle curcumin was higher 22-, 35-, 28-fold than native curcumin in men, women, and all subjects, respectively. For comparing by formulation, seven healthy subjects were recruited and received two type of treatment: (1) existing dosage form 300 mg (contained curcumin 30 mg) ${\times}$ 3 capsule, (2) high dosage form 300 mg (contained curcumin 90 mg) ${\times}$ 1 capsule + placebo 300 mg ${\times}$ 2 capsule. In the cross-over study, there was no significant differences in $C_{max}$ and AUC of plasma curcumin. In conclusion, submicron particle curcumin with increased water dispersibility significantly improved its oral bioavailability and women absorbed curcumin more effectively than men. Different formulation of Theracurmin(R) CR-033P has shown equivalent to the reference in terms of pharmacokinetics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.543-550
• /
• 2009

This study was performed to prove the possibility of utilizing short plastic fibers made for recycled polyethylene terephthalate (RPET) as a structural material. In order to verify the capacity of RPET fiber, it was compared with polypropylene (PP) fiber, most widely used short synthetic fiber, for fiber volume fraction of 0%, 0.5%, 0.75%, and 1.0%. To measure material properties such as compressive strength, split tensile strength, appropriate tests were performed. Also, to measure the strength and ductility capacities of reinforced concrete (RC) member casted with RPET fiber added concrete, flexural test was performed on RC beams. The results showed that compressive strength decreased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. Split cylinder tensile strength of RPET fiber reinforced concrete increased slightly as fiber volume fraction increased. For structural member performance, ultimate strength, relative ductility and energy absorption of RPET added RC beam are significantly larger than OPC specimen. Also, the results showed that ultimate flexural strength and ductility both increased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. The study results indicate that RPET fiber can be used as an effective additional reinforcing material in concrete members.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.60-71
• /
• 2024

The present study aims to investigate the level difference of floor impact noises of composite floor structure using EVA resilient materials. In order to this, four different types of resilient materials were designed combining PET, PP sheet and EVA mount including Flat type, Deck type, Cavity type and Mount type. Totally 9 different samples were made for acoustic measurements which were carried out twice with bang-machine and impact ball as the heavy-weight floor impact noise sources. All the floor impact noise measurements were undertaken at the authentication institution. As a result, concerning Flat and Cavity types, it was found that 2 dB ~ 5 dB of heavy-weight floor impact noise was reduced supplementally when PET was added, while floor impact noise larger than 50 dB was acquired when single resilient material was used. Especially, most high performance was obtained for Mount type with 1st grade of light-weight floor impact noise and 2nd grade of heavy-weight floor impact noise. This is because of material property with low dense PET sound absorption materials which fill all around EVA mounts. Also, it was considered that this results are due to the sound impact absorption by the both EVA mounts and the air cavity between EVA mount and PP sheet. Also, it was found that at least 36 EVA mounts per 1m2 area of resilient panel make more noise reduction of heavy-weight floor impact noises.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1164-1172
• /
• 2011

Two experiments were conducted to evaluate the efficacy of Trichoderma reesei derived phytase for pigs fed diets with fixed calcium to total phosphorus ratios (1.5:1). In Exp. 1, 280 weaned pigs (initial BW of $10.32{\pm}1.94$ kg) were allocated to one of five dietary treatments on the basis of weight and gender in a randomized complete block design. Treatments were the low phosphorus (0.6% Ca, 0.4% total P and 0.23% available P) diets supplemented with 0, 250, 1,000, or 2,000 FTU phytase/kg of diet and a positive control diet (PC; 0.85% Ca, 0.58% total P and 0.37% available P). The treatments were applied to seven pens with eight pigs per pen, half male and half female. In Exp. 2, six barrows fitted with ileal T-cannula (initial BW = $35.1{\pm}1.6$ kg) were assigned to three dietary treatments with a double $3{\times}3$ Latin square design. The dietary treatments were the low-phosphorus diet (0.53% Ca, 0.34% total P and 0.14% available P), the low phosphorus diet plus 1,000 FTU phytase/kg and a positive control diet (0.77% Ca, 0.50% total P and 0.30% available P). In Exp. 1, there were linear increases (p<0.01) in weight gain, phosphorus absorption, bone strength, calcium and phosphorus content of fat-free dried bone and plasma phosphorus concentrations with increasing dose rate of phytase. The performance of pigs fed the diets with 250, 1,000, or 2,000 FTU of phytase/kg did not differ from pigs fed the PC diet. Pigs fed diets with 1,000 or 2,000 FTU of phytase/kg did not differ from pigs fed the PC diet in bone characteristics. The apparent digestibility of dry matter, crude protein, ash and energy was not affected by dietary treatment. However, pigs fed the PC diet excreted more fecal phosphorus (g/d, p<0.01) and fecal phosphorus per BW gain (g/kg) than pigs fed the diets with phytase. Phytase linearly decreased (p<0.01) fecal phosphorus excreted per BW gain (g/kg), plasma calcium concentration as well as plasma and bone alkaline phosphatase activity. In Exp. 2, phytase supplementation in the low-P diet increased (p<0.05) the apparent ileal digestibility (AID) of Ca, P, leucine, lysine, phenylalanine, alanine and cysteine, tended to AID of crude protein, isoleucine, threonine, asparagine and serine. In conclusion, the novel phytase originated from Trichoderma reesei is effective in releasing Ca, P, and amino acids from corn soy based diet for pigs.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.491-500
• /
• 2007

Two experiments were used to determine the effects of environment-friendly diets on growth performance, fecal excretion, nitrogen excretion and emission gases in manure for growing pigs. In experiment 1, ninety six crossed pigs(Landrace×Yorkshire×Duroc) were allocated into four treatments. Treatments were AME(adequate ME diet, 3,265 kcal/kg), LME(lower ME diet, 3,100 kcal/kg), LME 0.05(lower ME diet+α- galactosidase & β-mannanase 0.05%) and LME 0.10(lower ME diet+α-galactosidase & β-mannanase 0.10%). Pigs fed AME diet had lower ADFI(Average Daily Feed Intake) than pigs fed other diets(p<0.05). DM(Dry Matter) digestibility in pigs fed AME and LME 0.10 diets had greater than pigs fed LME diet(p<0.05). Energy digestibility is higher in pigs fed AME and LME 0.10 diets than other treatments(p<0.05). In experiment 2, twenty four crossbred pigs(33.71 kg average BW) were used in a 14-d metabolism experiment. The pigs were housed in individual cages equipped with plastic bed flooring. Treatments were CP(Crude protein) 18% without Bacillus sp., CP 18% diet+Bacillus sp. 0.05%, CP 14% without Bacillus sp. and CP 14% diet+Bacillus sp. 0.05%. Nitrogen intake was higher for CP 18% diets than CP 14% diets(p<0.05). DM, N(Nitrogen) and energy digestibility were affected by probiotics(p<0.05). With the high CP in diets, Energy and N digestibility, urine N percent, urine N excretion and total N excretion were increased significantly compared to low CP in diets(p<0.05). Among the treatments, DM and N digestibilities, feces N excretion, N absorption were decreased significantly(p<0.05), however, feces excretion, feces N, urine N percent, urine N excretion and total N excretion were increased significantly(p<0.05) when pigs fed without probiotics diets compare to pigs fed with probiotics diets. DM and N digestibility, feces excretion, feces N excretion, urine N percent, urine N excretion, total N excretion, N absorption and N adsorption ratio were CP×probiotic interactions in p<0.05. Ammonia(p<0.01) and H2S(p<0.05) in manure were lower in CP 14% diets than CP 18% diets. Also, ammonia and H2S in manure were CP×probiotic interactions in p<0.05. In conclusion, low energy and reduction of CP dietary added enzyme and probiotics improved nutrient digestibility and reduced odors emission in manure for growing pigs.

• Korean Journal of Poultry Science
• /
• v.42 no.3
• /
• pp.247-256
• /
• 2015

There are approximately 1,500 broiler farms in Korea, each raising 55,000 birds. Ninety-five percent of the farms are contracted with Integration Company. According to the Korean broiler performance index, broilers in Korea are marketed at 32 days with 1.52 kg of body weight. In contrast, the market age and body weight of broilers are 47 days/2.8 kg in the United States and 42 days/2.5 kg in Europe. Because of the younger market age of the Korean broiler, the pre-starter feed is important. Chicks exhibit poor absorption of dietary nutrients up to 7 days after hatching due to an immature digestive system and low enzyme secretion rate and activity. At the beginning of hatching, chicks obtain their nutrients from the egg yolk sac. It is highly recommended that chicks, after consuming the nutrients in the egg yolk sac, are given supplemented pre-starter feed to increase early growth rates and improve the performance of broiler production. Pre-starter nutrient requirements are not expressed in NRC, so Korean feeding standards for poultry and commercial breeding companies determine the nutrient requirements of pre-starter broiler chickens. Three approaches are followed to formulate specially designed pre-starter feeds for broiler chicks: (i) selective use of raw materials, (ii) proper standards of nutrient supply, and (iii) application of feed additives such as exogenous enzymes. In the selection of raw materials, those with high digestibility can be used. The absorption rate of carbohydrates in grains can be increased through feed processing at high temperature and high pressure. Soy proteins and fish meal can also be added as protein sources. As an energy source, vegetable oils are preferred over animal fats because of the former's high digestibility. It is suggested that the levels of proteins and amino acids are higher in pre-starter feed than in starter feed. With regard to energy, the sources of energy are more important than the levels of energy in feed. Feed additives such as exogenous enzymes can be used to improve nutrient digestibility. In addition, organic acids and plant extracts can be used as alternatives to animal growth promoters to stimulate immunity and prevent diseases. The growth performance of broilers is affected by various factors, such as management and disease control, in addition to the nutritional strategy; however, nutritional strategies play an important role in improving the productivity of broilers. Therefore, nutritional strategies, along with management and disease control, are required for improving the productivity of broilers in Korea.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.4 s.44
• /
• pp.628-649
• /
• 1993

This study was conducted to investigate the factors related to the poor school performance of the elementary school children. Two schools in Taegu, one in the affluent area and the other in the poor area, were selected and a total of 175 children whose school performance was within low 10 percentile (poor performers) and 97 children whose school performance were within high 5 percentile (good performers) in each class of 2nd, 4th and 6th grades were tested for the physical health, behavioral problem and family background. Each child had gone through a battery of tests including visual and hearing acuity, anthropometry (body weight, height, head circumference), intelligence (Kodae Stanford-Binet test), test anxiety (TAI-K), neurologic examination by a developmental pediatrician and heavy metal content (Pb, Cd, Zn) in hair by atomic absorption spectrophotometry. A questionnaire was administered to the mothers for prenatal and prenatal courses of the child, family environment, child's developmental history, and child's behavioral and learning problems. Another questionnaire was administered to the teachers of the children for the child's family background, arithmatic & language abilities and behavioral problem. The poor school performance had a significant correlation with male gender, high birth order, broken home, low educational and occupational levels of parents, visual problem, high test anxiety score, attention deficit hyperactivity disorder (ADHD), poor physical growth (weight, height, head circumference) and low I.Q. score. The factors that had a significant correlation with the poor school performance in multiple logistic regression analysis were child's birth order (odds ratio=2.06), male gender(odds ratio=5.91), broken home(odds ratio=9.29), test anxiety score(odds ratio=1.07), ADHD (odds ratio=9.67), I.Q. score (odds ratio=0.85) and height less than Korean standard mean-1S.D.(odds ratio=11.12). The heavy metal contents in hair did not show any significant correlation with poor school performance. However the lead and cadmium contents were high in males than in females. The lead content was negatively correlated with child's grade(P<0.05) and zinc was positively correlated with grade (P<0.05). among the factors that showed a significant correlation with the poor school performance, high birth order, short stature and ADHD may be modified by a good family planning, good feeding practice for infant and child, and early detection and treatment of ADHD. Also, teacher and parents should restrain themselves from inducing excessive test anxiety by forcing the child to study and over-expecting beyond the child's intellectual capability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.522-528
• /
• 2009

This study focused on establishing prediction models using visible-near infrared spectrum to simultaneously detect multiple components of soils and enhancing the performance quality by suitably transformed input spectra and classification of soil spectral types for prediction model input. The continuum-removed spectra showed significant result for all cases in terms of soil properties and classified or bulk predictions. The prediction model using classified soil spectra at an absorption peak area around 500nm and 950nm efficiently indicating soil color showed slightly better performance. Especially, Ca and CEC were well estimated by the classified prediction model at $R^{2}$ > 0.8. For organic carbon, both classified and bulk prediction model had a good performance with $R^{2}$ > 0.8 and RPD> 2. This prediction model may be applied in global soil mapping, soil classification, and remote sensing data analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.189-189
• /
• 2012

Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.

• Advances in nano research
• /
• v.8 no.4
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.