• Journal of Radiation Protection and Research
• /
• 제26권2호
• /
• pp.51-58
• /
• 2001

환경방사능과 같은 저준위 방사능 측정에서는 원통형과 Marinelli형 측정용기가 가장 일반적으로 사용된다. 효율교정용 표준선원과 측정시료의 높이 또는 매질의 밀도가 다르면 자체흡수 효과의 차이로 인한 보정이 필요하다. 본 연구에서는 Monte Carlo 방법을 이용하여 HPGe 검출기의 전에너지 피크 효율을 계산하여 측정치와 비교하였다. 원통형 용기에 대해서는 높이에 대한 효율변화 정도를 계산하였고, 원통형 및 Marinelli 측정용기에 대해서는 밀도변화에 따른 효율을 계산하였다. 밀도에 따른 효율의 감소 정도는 1000keV 이하의 에너지 영역에 대해 자체흡수 효과의 보정치 필요하다는 것을 알았다. 또한 계산의 타당성을 검증하기 위하여 NIST SRM 4353 표준물질을 이용하여 계산값과 인증값을 상호비교한 결과 오차범위 이내로 잘 맞는 다는 것을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권6호
• /
• pp.725-731
• /
• 1998

Nine crossbred female pigs fitted with the bladder catheters were used to investigate the effects of dietary protein form on the efficiency of absorbed nitrogen for nitrogen retention in growing pigs. Combinations of the main protein sources were corn-soybean meal (CSM; slow + slow absorption rate form), corn-hydrolyzed casein (CAS; slow + rapid absorption rate form) and corn-porcine plasma (CPL; slow + intermediate absorption rate form). All experimental diets were formulated to be isonitrogenous (CP 11%) and isocaloric (3.5 Mcal/kg) and synthetic amino acids were added to the diet as required to maintain an equivalent amino acid profile among diets. Fecal digestibility of nitrogen was not different among treatments (p > 0.10). Ingested nitrogen was absorbed with an apparent efficiency of 82% to 84%. Mean nitrogen retention in pigs fed the CSM diet was as high as for pigs fed the CPL diet (0.74 g N/kg $BW^{0.75}$ per d), which was higher than the N retention rate in pigs fed CAS diet (0.68 g/kg $BW^{0.75}$ per d; P < 0.05). Apparent biological values (ABV = 100 ${\times}$ N retention/absorbed nitrogen) were 63.3%, 58.0% and 61.6% for CSM, CAS, and CPL groups, respectively (p < 0.05). There was no difference in mean energy digestibility among treatments. The efficiency of absorbed lysine utilization was significantly different among treatments (p < 0.05). Pigs fed the CAS diet were inferior to counterparts on the other diets in utilizing absorbed lysine. The ratios of free (and small peptide-bound) to protein-bound amino acids in CSM diet differed considerably from the CAS diet. This may affect the efficiency of amino acids utilization for nitrogen retention if hydrolyzed and intact amino acid pools reach the blood at different times.

• Current Photovoltaic Research
• /
• 제8권3호
• /
• pp.94-101
• /
• 2020

This study was trying to focus on achieving high efficiency of multi junction solar cell with thin film silicon solar cells. The proposed thin film Si-Ge/c-Si tandem junction solar cell concept with a combination of low-cost thin-film silicon solar cell technology and high-efficiency c-Si cells in a monolithically stacked configuration. The tandem junction solar cells using amorphous silicon germanium (a-SiGe:H) as an absorption layer of upper sub-cell were simulated through ASA (Advanced Semiconductor Analysis) simulator for acquiring the optimum structure. Graded Ge composition - effect of E_g profiling and inserted buffer layer between absorption layer and doped layer showed the improved current density (J_sc) and conversion efficiency (η). 13.11% conversion efficiency of the tandem junction solar cell was observed, which is a result of showing the possibility of thin film Si-Ge/c-Si tandem junction solar cell.

• 한국태양에너지학회 논문집
• /
• 제25권3호
• /
• pp.47-52
• /
• 2005

Normally if sunlight is directed on a solar cell without any increasing in temperature, the amount of absorption energy per unit area of each cell is increasing. In a silicon solar cell. however, cell conversion efficiency decreases with the increase of temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. We tried to design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect and use thermal energy more effectively. We compared performance of this new hybrid panel with current thermal panel. We also evaluated conversion efficiency, thermal capacity and confirmed cooling effects from thermal absorption efficiency.

• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.13-21
• /
• 1998

Based on the escape cone concepts, high-brightness light-emitting diodes (LEDs) have been analyzed. In AlGaAs or InGaAlP LEDs, photon absorption in the ohmic region under the electrode is known to be significant. Thus, ins general, a thick window layer (WL) and a transparent substrate (TS) would minimize photon shielding by the electrodes and considerably improve photon output coupling efficiency. However, the schemes do not seem to be necessary in InGaN system. Photon absorption in ohmic contact to a wide bandgap semiconductor such as GaN may be negligible and, as a result, the significant photon shielding by the electrodes will not degrade the photon output coupling efficiency so much. The photon output coupling efficiency estimated in InGaN LEDs is about 2.5 - 2.8 times that of the conventional high-brightness LED structures based on both WL and TS schemes. As a result, the extenal quantum efficiency in InGaN LEDs is as high as 9% despite the presumably very low internal quantum efficiency.

• 한국대기환경학회지
• /
• 제14권6호
• /
• pp.537-544
• /
• 1998

We selected Spathiyhyllum patinii and Pachira aqkatica, since the former has high O3 absorption while the latter low absorption, and analyzed physiological factors such as diffusive coefficient, transpiration rate, photosynthetic rate, and CO2 absorption rate, which affected O3 absorption capacity There was significant relationship between gas absorption capacity and the other factors; photosynthetic rate, diffusive resistance, stomatal resistance and CO2 absorption rate. Therefore model formula for estimation of O3 absorption rate in plant was formulated by making use of these factors. There was difference for the estimation of O3 absorption rate according to plant species. In case of Spathiphyllum patinii, photosynthetic rate is an optimal factor for estimation of O3 absorption capacity. On the other hand, stomatal resistance and diffusive resistance are optimal factors of Pachira aquatica among various physiological ones. And we knew that CO2 absorption rate is a potential factor to evaluate gas absorption capacity regardless of plant species. But considering efficiency and practicality, diffusive resistance was the most effective factor for the estimation of O3 gas absorption.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.134.2-134.2
• /
• 2014

Photonic crystal solar cells have the potential for addressing the disparate length scales in polymer photovoltaic materials, thereby confronting the major challenge in solar cell technology: efficiency. One must achieve simultaneously an efficient absorption of photons with effective carrier extraction. Unfortunately the two processes have opposing requirements. Efficient absorption of light calls for thicker PV active layers whereas carrier transport always benefits from thinner ones, and this dichotomy is at the heart of an efficiency/cost conundrum that has kept solar energy expensive relative to fossil fuels. This dichotomy persists over the entire solar spectrum but increasingly so near a semiconductor's band edge where absorption is weak. We report a 2-D, photonic crystal morphology that enhances the efficiency of organic photovoltaic cells relative to conventional planar cells. The morphology is developed by patterning an organic photoactive bulk heterojunction blend of Poly(3-(2-methyl-2-hexylcarboxylate) thiophene-co-thiophene) and PCBM via PRINT, a nano-embossing method that lends itself to large area fabrication of nanostructures. The photonic crystal cell morphology increases photocurrents generally, and particularly through the excitation of resonant modes near the band edge of the organic PV material. The device performance of the photonic crystal cell showed a nearly doubled increase in efficiency relative to conventional planar cell designs. Photonic crystals can also enhance performance of other optoelectronic devices including organic laser.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권1호
• /
• pp.47-52
• /
• 2010

근해에 설치되는 3차원 착저식 OWC 파력발전 챔버 구조물의 파 에너지 흡수효율과 구조물에 작용하는 1차 및 시간 평균 2차 파랑하중의 해석기법을 보였다. 쌍동형 OWC챔버 내부의 변동압력을 각 챔버의 내부 자유표면 경계조건에 도입하였으며 챔버 내부는 Rankine, 외부는 유한수심 3차원 자유표면 Green함수에 연계된 하이브리드 적분방정식을 사용하여 포텐셜 유동을 해석하였다. 수치실험 결과로서 3차원 착저식 OWC 파일럿 플랜트의 파력발전 1차변환 효율과 구조물에 작용하는 반복 및 지속적인 파랑하중을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.161-166
• /
• 2002

The modification factor( k-factor) of equivalent damping ratio utilized in the current state-of-the-practice to account for the imperfection of reinforced concrete structures in hysteresis loop is investigated. From this, it is found that the current modification factor does not include the effect of cyclic loading, one of the important characteristic properties of earthquake loading. This could be taken into account by considering the energy absorption efficiency based on the cummulative plastic deformation. From the study, it is suggested that the current approach for the modification factor for the equivalent damping ratio should be reformed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.68-68
• /
• 2007