• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1669-1674
• /
• 2012

A novel superabsorbent composite was prepared by intercalation polymerization of acrylic acid (AA) and 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) in the presence of montmorillonite (MMT), using ammonium persulfate (APS) as an initiator and $N,N'$-methylenebisacrylamide (MBA) as a cross linker. The superabsorbent composite was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Maximum absorbency of the composite in distilled water and 0.9% sodium chloride solution was 722 and 108 g/g, respectively. The composite was used for removal of heavy metal ions from aqueous solutions. Maximum amount of adsorption for $Ni^{2+}$, $Cu^{2+}$ and $Pb^{2+}$ was 211.0, 159.6 and 1646.0 mg/g, respectively, and the adsorption was in accordance with both Langmuir and Freundlich model. The composite could be regenerated and reused in wastewater treatment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.290.1-290.1
• /
• 2016

Grapehen, a single atomic layer of graphite, has been in the spotlight and researched in vaious fields, because its fine mechanical, electrical properties, flexibility and transparence. Synthesis methods for large-area graphene such as chemical vaper deposition (CVD) and mechanical, chemical exfoliation have been reported. In particular, chemical exfoliation method receive attention due to low cost process. Chemical exfoliation method require reduction of graphene oxide in the process of exfoliation such as chemical reduction by strong reductant, thermal reduction on high temperature, and optical reduction via ultraviolet light exposure. Among these reduction methods, optical reduction is free from damage by strong reductant and high temperature. However, optical reduction is economically infeasible because the high cost of short-wavelength ultraviolet light sorce. In this paper, we make graphene-oxide and lanthanoid ion mixture aqueous solution which has highly optical absorbency in selective wevelength region. Sequentially, we synthesize reduced graphene oxide (RGO) using the solution and visible laser beam. Concretely, graphene oxide is made by modified hummer's method and mix with 1 ml each ultraviolet ray absorbent Gd3+ ion, Green laser absorbent Tb3+ ion, Red laser absorbent Eu3+ ion. After that, we revivify graphene oxide by laser exposure of 300 ~ 800 nm layser 1mW/cm2 +. We demonstrate reproducibility and repeatability of RGO through FT-IR, UV-VIS, Low temperature PL, SEM, XPS and electrical measurement.

• 한국의류학회지
• /
• 제36권5호
• /
• pp.512-522
• /
• 2012

This study examined the work environment and wearing conditions of industrial protective clothing in shipbuilding workshops. It also investigated the relationship between the wearing sensation of industrial protective clothing and overall comfort, according to work process. In addition, the work posture according to work process was evaluated based on ergonomic factors. The wearing rate of industrial protective clothing was 73.3%, 66.7%, and 60.1% for workers engaged in welding, grinding, and painting, respectively. The harmful work environment factors, listed from most harmful to least harmful, were found to be high temperature pyrogens, noxious fumes, organic solvents, UV rays, and heavy dust. The aspect of wearing performance of industrial protective clothing that was most related to user dissatisfaction was poor sweat absorbency. In terms of the correlation between the overall comfort and the wearing sensation of industrial protective clothing, the satisfaction was low shown in orders of physiological comfort, sensual comfort, and movement comfort.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.518-528
• /
• 2010

This study analyzes the work environment and the work clothes wearing conditions of shipyard painters. In addition to this, three types of experimental painting work clothes were evaluated by painters in terms of the material performance and wearing functions. The findings on the harmful painting work environmental factors were organic solvents, noise, heavy dust, high temperatures, and noxious fumes. The body parts damaged during painting operations were the skin, arms, whole body, and face. In general, the satisfaction with the wearing performance of work clothes for painting was low especially in regards to sweat absorbency, sweat permeability, body protection, covering, and the work motion suitability. The satisfaction with the wearing sense of painting working clothes (regardless of the type of material) was high in the order of movement comfort> sensual comfort> physiological comfort. The satisfaction in overall comfort according to the types of material was high in the order of nylon> SMS nonwoven fabric> SF nonwoven fabric.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.201-209
• /
• 2011

With a new method of applying chitosan and alginate onto cellulose, multi-coated cotton fabrics with chitosan and alginate were prepared and characterized. To coat cotton with chitosan, raw cotton was dipped in chitosan solution, mangled of 1kgf/$cm^2$, neutralized in 2 wt% NaOH soluton, washed, and dried at $60^{\circ}C$ oven. The chitosan-coated fiber was dipped in sodium alginate solution, 1kgf/$cm^2$ mangled, neutralized in 2 wt% $CaCl_2$ solution, washed, and dried at $60^{\circ}C$ oven, resulting in CCAC(coated cotton with chitosan and calcium alginate skin) fiber characteristics. Excellent absorbancy of distilled water and saline solution was observed by the absorption test on cotton fabric treated with CCAC(0.5 wt% calcium alginate) and 0.5 wt% calcium alginate respectively. The SEM photograph confirmed the uniform coating on the cotton fabric surface.

• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.9-18
• /
• 2008

Wool has excellent properties, such as heat retention, absorbency, and elasticity, but it has a disadvantage in washability because the fabric will felt and shrink greatly. Felting causes the interlocking of the fiber surface scales with one another. Therefore, the studies on wool finishing have been focused on shrink proofing. Precedent researches on wool shrink proofing are mostly on eco-friendly method. using enzyme. The purpose of this study is to examine the effect of L-cysteine, EDTA in papain treatment of wool fabrics. The specific contents of study are as follows. Depending on pH, temperature, treatment time, enzyme concentration and L-cysteine, EDTA concentration, weight loss, tensile strength, whiteness, SEM were examined. Each papain treatment conditions depending on L-cysteine, EDTA were optimized from these properties. Papain had very low activation without activators. The optimum conditions of papain treatment were pH 7.5, temperature $75^{\circ}C$, time 30minutes(L-cysteine), 180minutes(EDTA) and papain concentration 5%(o.w.f.). In the use of papain 5%(o.w.f.), the activators optimum concentration was L-cysteine 2%(o.w.f.), EDTA 7%(o.w.f.)

• 폴리머
• /
• 제30권4호
• /
• pp.286-292
• /
• 2006

Super water-absorbent resins were prepared by inverse suspension copolymerization of sodium acrylate, acrylamide and 2-hydroxyethyl acrylate using N, N'-methylene-bis-acrylamide as cross-linker. For the suspension copolymerization, monohexadecyl phosphate was employed as the dispersing agent, cyclohexane as the dispersing medium and potassium persulfate as the initiator. The dependence of water-absorption capacity on the amount of crosslinking agent, oil/water ratio, degree of neutralization and the composition of the copolymer were systematically investigated. Furthermore, the swelling kinetics of the super water-absorbent copolymer was carried out. The absorption of the resins is more than 1800 g/g for deionized water and 100 g/g for 0.9% NaCl solution, respectively. The copolymers showed an increased salt resistance and enhanced water retention of soil.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.47-54
• /
• 1994

Cotton fiber, NaOH-mercerized cotton fiber, cotton fabric, and NaOH-mercerized cotton fabric have been treated by liquid ammonia at -33.4$^{\circ}C$. The fine structures, bending properties, tensile strengthes, shrinkages for laundering, and wrinkle recoveries were studied. The treatment of cottons with liquid ammonia brought about the transition of crystal lattice ; transforming cellulose I crystal of original cotton to cellulose I and III crystal, and cellulose II crystal of mercerized cotton to cellulose II and III crystals. The degree of crystallinities were decreased in the order of liquid ammonia>NaOH/liquid ammonia>NaOH-treated cotton. However moisture regain and water absorbency for liquid ammonia-treated cotton were lower than that of NaOH-treated cotton because of a difference in swelling actions of the agents. It seems caused by intermicrofibrillar pores produced in swelling processes. The bending rigidity and bending hysteresis were decreased remarkly by liquid ammonia treatment. Therefore softness and dimensional stability were improved. The liquid amminia and NaOH/liquid ammonia-treated cottons moreover show excellent properties in tensile strength, anti-shrinkage for laundering, and wrinkle recovery.

• 한국의류학회지
• /
• 제34권8호
• /
• pp.1378-1391
• /
• 2010

This study examines the wearing conditions of working clothes according to the working environment and working processes at machinery, automobile, shipbuilding industry sites. It also investigates the relationship between the wearing sense of working clothes and the overall comfort according to work processes. The hazardous working environment was high in the order of the shipbuilding industry, machinery, and automobiles. The findings on the harmful overall work environmental factors were the noise, heavy dust, and noxious fumes, respectively. In general, the satisfaction with the wearing performance of working clothes was low especially with regard to sweat absorbency, sweat permeability, body protection and covering, and the work motion suitability. In respect of the correlation between the overall comfort and the wearing sense of working clothes, the satisfaction was decreased in the order of movement comfort, sensual comfort, and physiological comfort.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.609-619
• /
• 1996

Polyethylene Terephthalate (PET) has been used as a mainstream fiber to make silklike fiber. The silky characteristics such as softness, dry touch feeling and flexibility can be obtained by weight reduction treatment. In aqueous alkali solution, the surface of PET is dissolved away and reduced in weight. The PET fiber, yarn and fabric become thinner and the gaps between fibers are wider. Its mobility is greatly improved without change of basic structures of the treated PET fibrics. The alkali treatment was conducted under the various experimental conditions such as alkali (NaOH) concentration, treatment time and temperature. As the weight loss increased, drapability improved and tensile strength remarkably reduced. When the PET fabrics lost 30% in their weight, drape coefficient lowered as much as 30oA and tensile stregth lowered as much as 50%. The weight loss over 30% brings great improvement in drapability and dyeability and significant decline in durability. By the alkali treatment, absorbency in spectrophotometer of dyed PET can be increased as much as 82% due to the increase of the surface area and formation of microvoids on the surface.