• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.64.2-64.2
• /
• 2010

In order to improve the overall power conversion efficiency in dye-sensitized solar cells (DSSCs), it is very important to secure the sufficient surface area of photocatalytic nanoparticles layer for absorbing dye molecules. It is because increasing the amount of dye absorbed generally results in increasing the amount of light harvesting. In this work, we proposed a new method for increasing the specific surface area of photocatalytic titanium oxide ($TiO_2$) nanoparticles by using an inorganic templating method. Salt-$TiO_2$ composite nanoparticles were synthesized in this approach by spray pyrolyzing both the titanium butoxide and sodium chloride solution. After aqueous removal of salt from salt-$TiO_2$ composite nanoparticles, mesoporous $TiO_2$ nanoparticles with pore size of 2~50 nm were formed and then the specific surface area of resulting porous $TiO_2$ nanoparticle was measured by Brunauer-Emmett-Teller (BET) method. Generally, commercially available P-25 with the average primary size of ~25 nm $TiO_2$ nanoparticles was used as an active layer for dye-sensitized solarcells, and the specific surface area of P-25 was found to be ~50 $m^2/g$. On the other hand, the specific surface area of mesoporous $TiO_2$ nanoparticles prepared in this approach was found to be ~286 $m^2/g$, which is 5 times higher than that of P-25. The increased specific surface area of $TiO_2$ nanoparticles will absorb relatively more dye molecules, which can increase the short curcuit current (Jsc) in DSSCs. The influence of nanoporous structures of $TiO_2$ on the performance of DSSCs will be discussed in terms of the amount of dye molecules absorbed, the fill factor, the short circuit current, and the power conversion efficiency.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.101-107
• /
• 2005

In this article, mordant absorption rate by the Change of temperature and fabric, discharge level by water washing, mordant density and method in mordant dye are going to be handled. Besides, how treatment method will have an effect on absorption rate and color, is also going to be covered. An atom extinction photometer was used to measure the amount of mordant absorbed in fabric at each temperature and mordant type. It turned out that absorption rate differs according to the type of mordant and sample or temperature. Also it turned out that the mordant input amount has little influence on absorption rate, that is to say, if though you use more mordants, just tiny amount of mordant is going to be absorbed in cloth. It is true that the higher temperature goes up, the better mordant absorption gets. It is found that the type of mordant and sample, treatment period affects the discharge rate. Normally $15{\~}98\%$ mordant comes off the fabric by water washing, to be specific, $17{\~}47\%$ Iron by water washing and it has better performance on cotton and nylon than silk, $1\%{\~}52\%$ Aluminum by water washing and better absorption on silk, $36{\~}89\%$ Chrome by water washing and better absorption on silk, $50{\~}89\%$ copper by water washing and better absorption on silk, poor on cotton. The examination of the K/S values and colors between before and after soaping has been conducted under the circumstance that the test fabrics had been treated at $80^{\circ}C$ for 30 minutes with $0.2\%$ soaping solution. In case of pre-mordanted fabrics, the K/S value nosedived after soaping, meanwhile densely mordanted fabric's K/S value soared but after soaping, it dropped sharply. It turned out that soaping treatment deteriorates absorption much more than water washing. It's considered that $0.1 \%$ (W/V) of mordant density is appropriate.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.40-46
• /
• 2014

The hydrogen embrittlement degree of 5 type high strength DP steel charged with hydrogen by electrochemical method was evaluated by small punch test(SP test). After SP test, SP absorbed energy was remarkably decreased from 363 kgf-mm to 209 kgf-mm with increasing hydrogen charging time from 5hr to 50hr at DP5 specimen under the $200mA/cm^2$ current density condition. It was investigated that the decrease of hydrogen charging amount and SP absorbed energy according to the increase of current density and hydrogen charging time had a linear relationship. And it also investigated that the change of bulb height appeared by the SP test was decreased from 1.79mm to 1.59mm with the hydrogen charging conditions. It was supposed that it could be used as indicator of the evaluation of hydrogen embrittlement because of the similar trend of the formal results of SP absorbed energy. From the SEM observation of fracture area by crack in bulb, the morphology of fracture surface according to increasement of the hydrogen charging amount was varied with the cleavage mode.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.1007-1014
• /
• 2022

Targeted radionuclide therapy (TRT) is a method of treating tumor cells using radiopharmaceuticals. Cells and nuclei constituting tissues of the human body are composed of spherical and oval shapes, but cancer cells are composed of various cell types. Therefore, this study analyzed the absorbed dose for each organelle according to the change in the size of the cell nucleus for beta-emitting nuclides during targeted radionuclide therapy through the Monte Carlo method. Cells were set in two sphere shapes, 5 ㎛ and 10 ㎛, and the internal structure was divided into cell nucleus, cytoplasm, and cell surface. Next, the absorbed dose according to the increase in the size of the cell nucleus was evaluated. As a result, ¹⁷⁷Lu among the target radionuclides showed the highest dose in all cell compartments. As the ratio of the nucleus in the cell increased, the absorbed dose on the cell surface increased, but the absorbed dose in the cytoplasm and nucleus tended to decrease. Accordingly, it is judged that it is important to select a radionuclide considering the size of cancer cells and determine an appropriate amount of radioactivity during targeted radionuclide treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.780-790
• /
• 2020

In this study, the cell-wall microstructure and anti-swelling effectiveness (ASE) of heat-treated larch wood were evaluated and the correlation between them was analyzed. For this purpose, some larch lumbers were heat-treated for 12, 18, and 24 hours at temperatures of 190℃ and 220℃. By observing the scanning electron microscopy cross-sectional image of the heat-treated larch, it was confirmed that the shape of heat-treated wood cell changed, the cut-section of the wood cell wall was rough, and the intercellular space has become wide as the intercellular bonds had broken because of heat-treatment. In addition, the evaluation of the swelling for each treatment condition revealed that, as the heat-treatment temperature and duration increased, the amount of absorbed water and swelling decreased and the ASE increased. The decrease in the amount of absorbed water is thought to be affected by the chemical change in the cell wall by heat-treatment. On the contrary, the decrease in the swelling and the increase in the ASE are thought to be due to a combination of chemical changes and physical changes such as structural changes in the cell wall.

• Korean Journal of Weed Science
• /
• v.10 no.2
• /
• pp.93-98
• /
• 1990

Interspecific competition between E. colona and rice was determined over four growth stages in replacement series. No competition between the two species as measured by plant height, leaf area and dry weight occurred by 30 days after seeding (DAS) at all the density combinations studied. At 45 DAS reductions in leaf area and dry weight of E. colons due to the competition occurred at the density combinations where number of competing E. colons plant was less than that of rice. However, there was a great increase in leaf area and dry weight of E. colons at the density combination of one E. colons competing with four rice plants at 60 DAS. As the number of E. colons plants increased, the leaf area and dry weight of E. colona decreased resulting from intraspecific competition between E. colons plants. Although rice absorbed more nitrogen than E. colons up to 30 DAS, the reverse was observed from 45 DAS. A relatively small amount of phosphorous was absorbed by both rice and E. colons, but the amount of phosphorous taken up by E. colons was greater than that taken up by rice. E. colons absorbed extremely high amount of potassium when compared to rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.4
• /
• pp.303-308
• /
• 2001

To investigate the partitioning of newly absorbed N derived from NO$_3$- and NH$_4$$^{+}$, 6 mM $K^{15}$ NO$_3$ or 3 mM ($^{15}$ NH$_4$)$_2$ was fed continuously in Italian ryegrass (Lolium multiflrum L.) for 7 days. Nitrogen metabolites (nitrate, amino acid, soluble- and insoluble protein) were analyzed at the end of $^{15}$ N feeding. Dry weight in shoot, stubble and root was not significantly different between NO$_3$$^{[-10]}$ and NH$_4$$^{+}$ feeding. Total nitrogen content in all three organs was significantly higher in NH$_4$$^{+}$ than NO$_3$$^{[-10]}$ feeding. Sum on N content in reduced N fractions (amino acids + proteins) in shoot, stubble and roots in NH$_4$$^{+}$ feeding increased by 13.3, 12.5 and 35.4 %, respectively, compared to NO$_3$$^{[-10]}$ feeding. The Relative Specific Activity (RSA, percentage of newly absorbed $^{15}$ N relative to total N in a sample) values of amino acids and insoluble proteins were significantly higher in NH$_4$$^{+}$ feeding. Total amount of newly absorbed $^{15}$ N in NO$_3$$^{[-10]}$ and NO$_3$$^{[-10]}$ feeding was 52.3 and 69.5 mg/plant on dry matter basis, respectively. In both NH$_4$$^{+}$ and NO$_3$$^{[-10]}$ grown plants, most of the N was allocated to the shoot, 67.5% in NH$_4$$^{+}$ feeding and 58.8% NO$_3$$^{[-10]}$ feeding, respectively. The $^{15}$ N amount incorporated in the reduced N compounds (amino acids and proteins) in NH$_4$$^{+}$ grown plants significantly increased by 74.8% compared to NO$_3$$^{[-10]}$ grown plants. The increase of the $^{15}$ N amount assimilated to amino acids in NH$_4$$^{+}$ grown plants was remarkably higher in roots as more than 7.25 times compared to NO$_3$$^{[-10]}$ feeding. These results indicated that Italian ryegrass was much efficiently utilized NH$_4$$^{+}$-N for the synthesis of reduced N compounds.reduced N compounds.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.4
• /
• pp.47-54
• /
• 1993

A series of laboratory tests was performed with soil-columns which were compacted with sands and different amount of silt collected from the mid-stream of Gumgang, Korea. A known degree of concentration of PCP(Pentachlorophenol) was poured into the soil-columns and concentration of PCP was monitored and analyzed with time and depth. The results of the study are summarized as follows : 1. PCP was transported into soil along with the movement of moisture under gravitational force. The amount of PCP transported through soil or absorbed by soil varied with soil types. 2. The great amount of PCP was remained at 4~8cm section for the specimen No.2 and at 0~4cm section for the specimen Nos. 3 and 4. Based upon this result it is said that the amount of silt between 30 and 40% may be a threshold value for PCP transported through soil. 3. The amount of PCP remained in the specimen Nos. 2, 3 and 4 is greater than that in the specimen No.1 due to high specific surface of silt and high attraction force between PCP and silt particles in the specimen Nos. 2, 3 and 4. 4. It is said that groundwater under highly permeable soil layer such as specimen No.1 is easily polluted by PCP. That is because the PCP is basically migrated with water under the gravitational force.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.141-145
• /
• 2017

This paper uses a glass dosimeter to evaluate the lens-absorbed dose of scattered radiation generated in tomotherapy intensity modulated radiation therapy (IMRT). The head and neck portion of the rando phantom was subjected to a CT scan. The tomotherapy plan was designed to ensure delivery of the prescribed total 70 Gy day 2.2 Gy. With the lens portion of the glass dosimeter, a 5mm bolus was subjected to the scattered radiation treatment, and the dose was measured in each of the three megavoltage CT (MVCT) modes. The result is multiplied by 30 times and was determined once as the mean value. The measurement at the MVCT Coarse mode is RT mode 10.797 mGy, that for the Normal mode is 13.360 mGy, for the Fine mode is a maximum of 22.872 mGy, and for the treatment mode is 895.830 mGy. A small amount of scattered radiation in the MVCT is measured in the lens scattered radiation, but scattered radiation during treatment was measured to be near 1 Gy on the lens. Compared to a one-time radiation treatment of 2.2 Gy, the survey showed something unexpected in that it was half the value of that research to the patient. Therefore, will be aware of how much of an influence there will be on sensitive organs, such as the lens by scattered radiation generated during intensity modulated radiation therapy.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2410-2414
• /
• 2020

Heavy ions have a high potential for destroying deep tumors that carry the highest dose at the peak of Bragg. The peak caused by a single-energy carbon beam is too narrow, which requires special measures for improvement. Here, carbon-12 (¹²C) ion with different energies has been used as a source for calculating the dose distribution in the water phantom, soft tissue and bone by the code of Monte Carlobased FLUKA code. By increasing the energy of the initial beam, the amount of absorbed dose at Bragg peak in all three targets decreased, but the trend for this reduction was less severe in bone. While the maximum absorbed dose per bone-mass unit in energy of 200 MeV/u was about 30% less than the maximum absorbed dose per unit mass of water or soft tissue, it was merely 2.4% less than soft tissue in 400 MeV/u. The simulation result showed a good agreement with experimental data at GSI Darmstadt facility of biophysics group by 0.15 cm average accuracy in Bragg peak positioning. From 200 to 400 MeV/u incident energy, the Bragg peak location increased about 18 cm in soft tissue. Correspondingly, the bone and soft tissue revealed a reduction dose ratio by 2.9 and 1.9. Induced neutrons did not contribute more than 1.8% to the total energy deposited in the water phantom. Also during ¹²C ion bombardment, secondary fragments showed 76% and 24% of primary 200 and 400 MeV/u, respectively, were present at the Bragg-peak position. The combined treatment of carbon ions with neutron or electron beams may be more effective in local dose delivery and also treating malignant tumors.