• 한국농공학회지
• /
• 제34권1호
• /
• pp.41-48
• /
• 1992

Various soil behaviors usually occurring in the geotechnical problems, such as, cutting and embankments, stability of slope, seepage, consolidations, shearing failures and liquefaction, should be predicted and analyzed in any way. An approach of these predictions may be followed by the development of the constitutive equations as first and subsequently solved by numerical methods. The purpose of this paper is develop the constitutive equation of sands uder monotonic or cyclic loadings. The constitutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parameter by Sekiguchi et al and Pender's theory is derived. And the equation is included a new stress parameter, hardening function, Bauschinger's effects and Pender's theory. The model is later evaluated and confirmed the validity by the test data of Ottawa sand, Banwol sand Hongseong sand. The following conclustions may be drawn: 1. The consititutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parpameter by Sekiguchi et al and Pender's theory is derived. The equation in included a new stress parameter, hardening function, Bauschinger's effect and Pender's theory. 2. For Ottawa sand, the result of the constitutive equation shows a better agreement than that of Oka et al. The result of axial strain agrees well with the tested data. However, the result of horizontal strain is little bit off for the cyclic loadings or large stress. It is thought that the deviation may be improved by considering Poisson's ratio and precise measurement of shear modulus. 3. Banwol sand is used for the strain and stress tests with different relative densitites and confining pressures. The predeicted result shows a good agreement with the tested data because the required material parameters were directly measurd and determined form this laboratory. 4. For Hongseong sand, the tests under same amplitude of cyclic deviatoric stress shows a similar result with the tested data in absolute strain. It shows the acute shape of turning point because the sine wave of input is used in the test but the serrated wave in prediction.

• 센서학회지
• /
• 제27권6호
• /
• pp.397-402
• /
• 2018

Proper seat design is critical to the safety, comfort, and ergonomics of automotive driver's seats. To ensure effective seat design, quantitative methods should be used to evaluate the characteristics of automotive seats. This paper presents a system that is capable of simultaneously monitoring body pressure distribution and surface deformation in a textile material. In this study, a textile-based capacitive sensor was used to detect the body pressure distribution in an automotive seat. In addition, a strain gauge sensor was used to detect the degree of curvature deformation due to high-pressure points. The textile-based capacitive sensor was fabricated from the conductive fabric and a polyurethane insulator with a high signal-to-noise ratio. The strain gauge sensor was attached on the guiding film to maximize the effect of its deformation due to bending. Ten pressure sensors were placed symmetrically in the hip area and six strain gauge sensors were distributed on both sides of the seat cushion. A readout circuit monitored the absolute and relative values from the sensors in realtime, and the results were displayed as a color map. Moreover, we verified the proposed system for quantifying the body pressure and fabric deformation by studying 18 participants who performed three predefined postures. The proposed system showed desirable results and is expected to improve seat safety and comfort when applied to the design of various seat types. Moreover, the proposed system will provide analytical criteria in the design and durability testing of automotive seats.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.686-692
• /
• 2016

A Crimp Force Monitor (CFM) is equipment for detecting crimp errors by analyzing crimp signals obtained from force and strain sensors. The analysis is commonly performed by aligning a measured crimp signal with a reference signal and comparing their difference. Current analysis methods often suffer from wrong alignments that result in false negative detections. This paper presents a new crimp signal analysis method in CFM. First, a falling edge alignment is proposed that matches falling edges of the measured and the reference signals by minimizing the absolute difference summation. Second, a signal parameter error is introduced to evaluate the crimp quality difference between the measured signal and the reference. For calculating the signal parameter error, part of a signal is identified and divided into several regions to maximize the signal parameter errors. Experiments showed that the proposed method can improve the signal alignment and accurately detect bad crimps especially with the strain sensor.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권2호
• /
• pp.135-150
• /
• 2006

Rubber material properties and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. This paper discusses the failure mechanism and material tests were carried out to predict the useful lifetime of NBR and EPDM for compression motor, which is used in refrigerator component. The heat-aging process leads not only to mechanical properties change but also to chemical structure change so called degradation. In order to investigate the aging effects on the material properties, the accelerated test were carried out. The stress-strain curves were plotted from the results of the tensile test for virgin and heat-aged rubber specimens. The rubber specimens were heat-aged in an oven at the temperature ranging from $70^{\circ}C\;to\;100^{\circ}C$ for a period ranging from 1 to 180 days. Compression set results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the compression set test, several useful lifetime prediction equations for rubber material were proposed.

• Elastomers and Composites
• /
• 제40권2호
• /
• pp.119-127
• /
• 2005

고무부품의 신뢰성을 확보하기 위해서 고무재료의 물성파악과 수명평가는 매우 중요하다 하겠다. 본 연구에서는 냉장고 콤프레샤 모터에서 발생되는 소음 및 진동 제어 목적으로 고무마운트에 사용되는 고무재료인 NBR과 EPDM에 대해 상온과 $70^{\circ}C,\;85^{\circ}C,\;100^{\circ}C$에서 75일 동안 노화시킨 상태에서 단축 인장과 이축 인장으로 물성시험을 수행하여 가교밀도, 100% 모듈러스 변화와 응력-변형률 관계를 파악하였다. 또한, 고무소재의 노화수명을 예측하기 위해 가속열 노화시험을 수행하여 시간-온도 환산식인 아레니우스 관계식을 구하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.10-20
• /
• 2013

보 구조물의 안전성을 평가하기 위해서, 해당 부재의 구조적 상태를 보여주는 보여줄 수 있는 변형률을 기반으로 한 모니터링 시스템이 이용되고 있다. 하지만 최대 변형률과 같은 부재의 상태를 대표할 수 있는 변형률이 발생하는 정확한 위치에 센서를 설치하지 않은 한, 계측된 변형률을 토대로 합리적인 평가를 할 수 있게 하는 추가적인 프로세스가 필요하다. 이에 따라 본 연구는 변형률계에 의해 계측된 이산데이터를 이용하여 강재 보 구조물의 변형률 분포를 추정하는 기법을 제안한다. 본 기법에서는 보 구조물에 작용하는 하중을 미지의 하중으로 가정하였기 때문에, 실제 적용성을 향상 시켰다. 최종적인 변형률 분포는 회귀 분석을 통해서 함수 형태로 주어진다. 본 기법을 이용한 추정 성능을 검증하기 위해서 분포하중, 집중하중, 모멘트가 동시에 작용하는 강재 보 구조물의 휨 실험을 수행하였다. 실험을 통해 추정 변형률의 값을 직접 계측한 값과 비교해 본 결과, 임의의 위치에서도 절대 오차 $2.32{\mu}{\varepsilon}$ 이내로 변형률을 추정할 수 있었으며, 전체 변형률 분포는 3.32% 이내의 상대오차로 얻을 수 있었다. 따라서 강재 보 모니터링 시스템에 효과적으로 적용할 수 있을 것으로 기대된다.

• 농업과학연구
• /
• 제9권1호
• /
• pp.377-386
• /
• 1982

고온균(高溫菌)의 생리적(生理的) 특성(特性)과 내열기구(耐熱機構)에 관한 기초자료(基礎資料)를 얻고자 온천토양(溫泉土壤)에서 ${\beta}$-galactosidase를 생산(生産)하는 고온균(高溫菌)을 분리(分離)하여 동정(同定)하고, 몇가지 주요(主要)한 생리적(生理的) 특성(特性)을 검토(檢討)하였으며, 그의 균체지방산(菌體脂肪酸) 조성(組成)을 gas chromatography로 분석(分析)하여 다음과 같은 결과(結果)를 얻었다. 1. ${\beta}$-galactosidase를 생산(生産)하는 공시(供試) 균주(菌株)는 Thermus속(屬)으로 동정(同定)되었다. 2. 분리선정(分離選定)한 균주(菌株)의 최적(最適) 생육온도(生育溫度)는 $65^{\circ}C$이었고, $37^{\circ}C$에서 생육(生育)하지 않는 절대(絶對) 고온균(高溫菌)이었으며 최적(最適) pH는 6.5내외(內外)이었다. 3. NaCl에 대(對)한 내성(耐性)은 NaCl 1% 이상(以上)에서 생육(生育)하지 못했다. 4. 공시균주(供試菌株)의 항생물질(抗生物質) 내성(耐性)은 Penicillin G는 $10{\mu}g/m{\ell}$, Chloramphenicol은 $0.5{\mu}g/m{\ell}$이었다. 5. Vitamin 요구성(要求性)은 Ca-pantothenate와 pyridoxine-HCl을 절대적(絶對的) 생육인자(生育因子)로 요구(要求)하였고 niacin을 자극적(刺戟的) 생육인자(生育因子)로 요구(要求)하였다. 6. 공시균주(供試菌株)는 최대(最大) 흡수파장(吸收波長)이 420nm 부근(附近)의 색소(色素)를 생성(生成)하였고 그의 생성능(生成能)은 약(弱)하였다. 7. 공시균주(供試菌株)의 균체 지방산(脂肪酸) 조성(組成)은 palmitic acid 60.20%, lauric acid 11.80%, myristic acid 7.56%, behenic acid 4.25%, capric acid 1.77%, stearic acid 2.13%, arachidic acid 1.53%이었다.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.44-51
• /
• 1999

A modified version of SST turbulence model is suggested to simulate unsteady separated flows over oscillating airfoils. The original SST model, which shows good performance in predicting various steady flows, often results in oscillatory behavior of aerodynamic loads in large separated flow regions. It is shown that this oscillatory behavior is due to the adoption of the absolute value of vorticity in generalizing the original model. As a remedy, a modification is made such that the vorticity in the original SST model is replaced by strain rate. The present model is verified for a mild separated airfoil flow at fixed angle of incidence and for unsteady flowfields about oscillating airfoils. The results are compared with BSL model and original SST model. It is illustrated that the present model gives a better agreement with the experimental results than other two models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1734-1739
• /
• 2007

The materials characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of rubber components. This paper discusses the failure mechanism and material test were carried out to predict the useful life of NBR and EPDM rubber mount for compression motor which is used in refrigerator. In order to investigate the heat-aging effects on the materials properties, stress-strain curve were obtained from the results of material tests. Compression set results changes as the threshold are used for assessment of useful life and the time were plotted against reciprocal of absolute temperature to give the Arrhenius plot.

• Journal of Microbiology and Biotechnology
• /
• 제4권4호
• /
• pp.349-353
• /
• 1994

An isolate 90-GT-302, identified as Kitasatosporia kimorexae, was found to produce antibiotics that induce mycelial swelling in Magnaporthe grisea, and Fusarium solani. The strain produced at least 5 antibiotics. Among them, the main active compound designated as kimorexin A was isolated and its physico-chemical properties and biological activities were examined, and as a result was found to be of the thiopeptide antibiotic. A comparison between the properties of kimorexin A and those of the known thiopeptide antibiotics led us to conclude that kimorexin A was a new thiopeptide polythiazolyl antibiotic. Kimorexin A showed a narrow antimicrobial spectrum against very limited genus of phytopathogenic fungi. It prevented host plants from infections of Rhizoctonia solani and absolute parasitic fungi, such as Sphaerotheca fuliginea and Puccinia recondita, almost completely at the treatment concentration of approximately 20 ppm.