• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.280-287
• /
• 2019

구강이라는 특수한 환경 속에서 치아는 평생을 거쳐 마모, 부식 등을 겪게 된다. 점진적이며 일정한 치아의 마모는 노화의 자연스러운 현상이나, 특정 요소에 의한 마모나 부식 등은 병적인 요소이며 교합면의 병리적 손상과 이에 따른 교합 부조화, 심미적 문제, 턱관절 장애 등을 야기할 수 있다. 본 증례는 26세의 젊은 여성 환자로 전반적인 치아의 마모와 부식이 동반된 상태였다. 디지털 안모 분석, 생리적 안정위, 전치부 치관 길이 평가 등을 통해 진단 납형을 제작하였다. 디지털 분석을 통해 치관연장술에 필요한 가이드를 제작하여 수술을 진행하였고 임시 보철물을 통하여 저작 기능 및 심미성을 회복하였다. 지르코니아 최종 보철로 수복하여 심미적, 기능적으로 만족할만한 결과를 얻었으므로 이 증례를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제61권3호
• /
• pp.234-244
• /
• 2023

치아 마모는 다양한 생리적, 병리적인 원인으로 일어나는 치아 경조직의 상실을 의미하며, 과도한 병적 마모는 치수의 병적 변화, 교합 부조화, 저작 기능 상실 및 심미적 문제 등의 합병증을 유발할 수 있다. 이러한 마모의 원인에 대해서는 교모, 마모, 부식, 굴곡파절에 의해 유발될 수 있으며 구강 내 교합하는 환경에서는 복합적으로 작용함이 알려져 있다. 과도한 병적 마모를 가진 환자의 경우 수복 전 수직 고경의 감소 유무에 대한 판단이 중요하며, 정확한 진단 및 분석과 예지성 있는 치료 계획 수립을 통해 근신경계와 악관절의 안정과 적응을 동반한 완전구강회복이 이루어져야 한다. 본 증례의 환자는 63세 남환으로 치아들이 많이 닳아 있으며 전반적으로 시리다는 주소로 본원에 내원하였으며, 환자의 교합수직고경에 관한 면밀한 분석 이후 교합수직고경의 증가를 동반한 완전구강회복을 시행하였다. 전체 치아의 균등한 접촉, 기능적 악운동과 조화를 이루는 전방 유도 및 측방 운동 시구치부 이개와 교합 평면의 개선을 치료 목표로 하였으며, 만족스러운 심미 및 기능적 결과를 얻었기에 이를 보고하고자 한다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.165-168
• /
• 2003

Nylon was the first commercialized synthetic fiber. It is a polyamide, derived from a diamine and dicarboxylic acid. The nylon fiber has outstanding durability and excellent physical properties such as stiffness, wear and abrasion resistance, friction coefficient and chemical resistance. Due to these properties of nylon 66, nano-sized fibers are produced by electrospinning method in this study. During the past years the nylon 66 fibers have been prepared by conventional melt spining. (omitted)

• Journal of Korean Vacuum Science & Technology
• /
• 제6권4호
• /
• pp.143-148
• /
• 2002

Method of plasma-immersion ion deposition of hydrogenated DLC films on relatively thick flat dielectric substrates from plasma of not-self-sustained low-pressure gas arc discharge is suggested. Coating properties have been investigated experimentally, average energy Per a deposited carbon atom depending on discharge current has been calculated. Optimum deposition parameters lot obtaining sufficiently hard and transparent high-adhesive a-C:H films on a 4-mm thick glass substrates have been determined. Possibility to use these coatings for photo-tools protection from abrasion wear at low operating loads is shown in general.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2000

Laser claddmg 1s thc deposition of material on the surface of a part or workpiece. Cladding of metals produces a 100% dense metallurgically-bonded coating with minimal dilution for enhanced corrosion, abrasion and wear resistance. Despite of minimal heat Input and reduced processing time, cladding quality 1s affected by various process condition such as laser power and feed rate. Therefore, it is necessary to develop the momtoring and control methods of laser cladding process for the best cladding quality. In this paper, laser cladding monitoring system using CCD camera for measuring cladding pool shape, and photo-diode sensor for detecting optical signal emitted from the cladding front is introduced The variables extracted using this system can be apphed to control the laser cladding system to achieve the best claddmg results..

• 동굴
• /
• 제71호
• /
• pp.13-17
• /
• 2006

New methods of nano sized material and composite coating preparations have been considered on the base of mathematical model of abrasion reaction interaction of milling and grinding bodies in planetary centrifugal mill. The essence of the method is the abrasive and oxidative wear of the milling bodies and amorphous (better inert) additives. Interactions between them has been supplied the necessary impulse of pressure and temperature on the impact frictional contacts and promoted chemical processes. The offered method can find application for such processing as sintering and geological minerals opening.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.783-791
• /
• 2000

Increasing demands in productivity are propelling the development of new manufacturing methods like hard machining, high speed cutting (HSC) or machining of difficult to machine materials. In these processes the toois are subjected to very severe mechanical, tribological and thermal loads. They fail prematurely by abrasion, cratering, edge breakage and cold welding. The performance of such tools will be enhanced by better and more wear resistant coatings. The development of these new coatings shows a clear trend towards complex multi-component and multi-layer configurations. TiAIN multilayer coating belongs to these coatings for the new cutting tool generation. This paper tries to explain the benefits of the new coatings. TiAIN multilayer coating offers the following advantages: reduction of manufacturing costs. boost productivity, and lower coolant procurement, conditioning and disposal costs.

• Archives of Reconstructive Microsurgery
• /
• 제11권2호
• /
• pp.167-172
• /
• 2002

The only treatment method for crushed soft tissue injuries in the proximal leg involving the knee joint is the microsurgical free flap transplantation, especially latissimus dorsi myocutaneous free flap is useful to cover the extensive soft tissue defects, therefore prevents iatrogenic below knee amputation and facilitates early wound healing, early ambulation and shortens hospital stay. Authors have treated the open amputation with crushed soft tissue and bone injuries in the proximal leg, and the repeated abrasion and infectious wound with traumatic neuroma in the below knee with myocutaneous free flap and succeeded to wear below knee amputation prosthesis and return to normal activities of the daily living in the relatively shorter period than usual.

• 자원환경지질
• /
• 제23권4호
• /
• pp.411-424
• /
• 1990

Mechanical, physical and petrographic properties of seventeen marble specimens collected from ten marble mines in Korea were investigated. Studied marbles were mainly composed of calcite, dolomite, and various amounts of serpentine, tremolite, olivine, quartz and opaque minerals. Complete and sutured textures were dominant. Compressive strength measured normal to the bedding plane is larger almost two times than that measured parallel to the bedding plane. From the results of Shore hardness test on marbles, water content was an important factor to decrease Shore hardness values. Engineering geological properties, especially, compressive strength, Young's modulus, wear resistance and water absorption could be controlled by the presence of quartz, and the type of marble texture. Water absorption-porosity, compressive strength-Young's modulus, and impact strength index-Los Angeles abrasion couples show good correlation. According to the comparative utility as commercial stone, it could be concluded that marbles from the Banglim mine, Songbo mine, Kwangdeok mine and Bongjeong mine were superior to that of other studied marbles.

• 접착 및 계면
• /
• 제3권1호
• /
• pp.30-36
• /
• 2002

In this paper, some idea about the use of Metal and ceramic filled epoxy adhesive, Anaerobic adhesive and RTV silicone in the assembly, maintain and repair of machinery and equipment is given. Many examples which have been successfully used in Chinese industry are introduced: ${\bullet}$ Wear, Abrasion, Corrosion/Erosion Resistance and Metal Rebuilding Worn shafts, Scored Hydraulic Ram, Bearing Housings, Slurry Pumps (Bodies & Impellers), Slide-ways, Heat Exchangers, Cracked Castings and Molds. Leaking Pipes and Tanks. ${\bullet}$ Locking and Retaining Thread, Bearing, Keyways, Bolts, Nuts, Studs, Gears, Collars, Motors. ${\bullet}$ Scaling and Gasketing Flanges, Pipe Joints, Machined surfaces.