• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.71-80
• /
• 2002

The purpose of this study was to examine the correlation between the shape of the foot and foot abrasion. and to provide preliminary data for shoe manufacturing by comparing the length of a woman's feet and the shoe size. The Martin calibrator and measuring tapes were utilized to measure the shapes of 163 female college students' feet. Indirect measurements were also obtained by line drawing of the feet for additional analysis. Brief questionnaires about what type of shoes are worn were given to the subjects of the study. Data analysis was presented by frequency, percentage, and standard deviations. Factor analysis and correlation co-efficiency of data was conducted on the significance level of p〈.05. The results of the study are as follows (1) The average number of days per week in which the subjects wear ladies' shoes per week were 4.5. Little over half of the subjects (53.87% ) answered that they wear heeled shoes for more than 8 hours per day. The most preferred height of a ladies'shoe heel was between 2 cm and 4 cm, as replied by 41.0% of the subjects. (2) The foot area where abrasion occurs most often was around the heel (51.2%) and the middle part of the sole (50.9%) (3) Factors correlated to the heel abrasion included the circumference and the breadth of the foot. The abrasion on the side of the first toe of mid-sized feet was most affected by the angle of the first the and inner foot line. The height of the foot heel was a significant factor for the abrasion near the anklebone. In conclusion, the abrasion resulted from the inappropriate fitting of the shoe and the foot. Also, the circumference and the width factors were more influential rather than the foot length. Therefore, more database on this should be systemized and available to the footwear manufacturers and the customers for more practical use of shoe size and public education.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.545-546
• /
• 2012

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.362-369
• /
• 2008

The impact abrasion behavior of high manganese steel is investigated under three kinds of impact energy in acid hematite ore slurry by using a modified MLD-10 impact abrasion tester. Through the SEM observation of the worn surface and the optical metallographic analysis of the cross-sectional samples, the corrosive impact abrasion mechanisms of the steel under different impact energies are studied. In acid-hematite slurry, the variations of impact energies would result in synchronous transformation of the impact abrasion properties and mechanisms of the high manganese steel in the corrosive condition, as led different corrosive impact abrasion mechanism under different impact energies.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1091-1104
• /
• 2018

Wear prediction of TBM disc cutters is a very important issue during design as well as construction stages for hard rock TBMs as the cutter head intervention is directly related to the time and cost of tunneling. For that, some methods such as NTNU, CSM and Gehring models were used to predict disc cutter wear and intervention interval. There are however some problems to be addressed in these models in terms of accuracy and time for testing, so that a NAT (New Abrasion Tester) model has been developed in order to achieve simplicity and reliability together at the same time (Farrokh and Kim, 2018). On the basis, the proposed NAT model has been applied to ${\bigcirc}{\bigcirc}$ project in Korea. A comparative study was performed to compare with the conventional methods and as a result the NAT model showed a very good agreement with actual cutter life. The NAT model will be further applied to other projects to establish credibility.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.205-208
• /
• 2006

Damage of hydraulic concrete structures by the abrasion and erosion process is very severe and it indicates that the necessity of considering the influence of this process while designing concrete mixtures. Abrasion wear of concrete in hydraulic structures is caused by the movement of particles, water-borne debris. The resistance against erosion for high-strength self-consolidating concrete(SCC) was examined in this paper. A newly designed testing method is presented in order to quantitatively estimate the erosion of concrete. It was shown that loss of volume in abraded concrete can be explained as function of material parameters such as the amount of fly ash and blast furnace slag. Those admixtures have been widely used to reduce heat of hydration and improve resistance against sulfate attack. The results of current study can be used as a guideline in selecting the composition of concrete exposed to abrasion-wear.

• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.601-605
• /
• 2007

The tribological properties of acrylonitrile-butadiene rubber (NBR) filled with two kinds of carbon black filler were examined. Different types of Semi-Reinforcing Furnace (SRF), and High Abrasion Furnace (HAF) blacks were used as filler material to test the influence of carbon black particle size on the friction and wear of NBR. Results from tribological tests using a ball on disk method showed that the smaller HAF particles were more effective for reducing the wear of NBR during frictional sliding. The hardness, elastic modulus at 100% elongation, and elongation at break were measured to examine the correlation between the effects of carbon black on the mechanical and tribological properties of the NBR specimens. The wear tracks of the NBR specimens were observed with scanning electron microscopy (SEM). The wear tracks for NBR with different ratios of SRF and HAF showed clearly different abrasion patterns. Mechanisms for the friction and wear behavior of NBR with different sizes of carbon black filler were proposed using evidence from wear track observation, as well as the mechanical and tribological test results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.203-208
• /
• 1999

Friction and wear test have been performed on nylon, polyacetal, and PTFE(polytetrafluoroethylene), in reciprocating dry sliding conditions against a steel disc. According to the results, polyacetal show lowest wear rates and PTFE was found to exhibit lowest friction coefficient. The prominent wear mechanism found were adhesion and abrasion.

• The Journal of the Korean dental association
• /
• v.41 no.1 s.404
• /
• pp.48-53
• /
• 2003

The purpose of this study is to report a clinical case of a patient whose vertical dimension of occlusion was lost. There are many reasons for the loss of vertical dimension and one of those can be a tooth wear problem. Thus in this article we will review shortly types of tooth wear: attrition, abrasion, and erosior. And layour the basic philosophy and principles in regaining the esthetics and function of a patient's oral condition with a history of psychological wear, through full mouth restorations.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2001

We measured the simultaneous, time-resolved spectra of photon emission, electron emission, and frictional force during the abrasion single crystal MgO with a diamond stylus in vacuum. phE and EE signal can be detected with millisecond resolution during the wear of a single crystal MgO substrate with a diamond stylus. The emissions and wear behavior are strong function of surface condition, load and stylus velocity. Measurement on annealed vs as-received material show that the luminescence is primarily due to deformation, and the electron emission is primarily due to fracture. These emissions provide insight into the processes responsible for catastrophic failure of ceramics in wear applications.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.34-41
• /
• 2020

Ready-mixed concrete is unconsolidated concrete typically transported to construction sites by using mixer trucks. A proper rotation of concrete is necessary to prevent its solidification in mixer trucks during transport: in accordance with the manufacturing method and quality inspection prescribed in KSF4009, this movement is maintained after the manufacturing of concrete in professional production plants and the addition of water, solid materials, and admixtures. Unfortunately, mixer truck parts wear out over long periods of time. In order to improve the wear resistance of the main part of mixer trucks, we used a steel plate with good wear resistance or partially added a reinforcement plate. In this study, we first tested the properties of concrete (as required for the DEM), and then carried out mixing and discharge simulations to define the actual operating conditions of mixer trucks. For each condition, we calculated the amount and location of wear. The reliability of our results was finally verified by comparing them with the measurement values. Overall, this study provided basic data for an optimal design of mixer trucks: one that would reduce the vehicles' weight and production costs.