• Structural Engineering and Mechanics
• /
• v.90 no.1
• /
• pp.19-26
• /
• 2024

In recent years, an increasing number of experimental studies have shown that the practical application of mature active control systems requires consideration of robustness criteria in the design process, including the reduction of tracking errors, operational resistance to external disturbances, and measurement noise, as well as robustness and stability. Good uncertainty prediction is thus proposed to solve problems caused by poor parameter selection and to remove the effects of dynamic coupling between degrees of freedom (DOF) in nonlinear systems. To overcome the stability problem, this study develops an advanced adaptive predictive fuzzy controller, which not only solves the programming problem of determining system stability but also uses the law of linear matrix inequality (LMI) to modify the fuzzy problem. The following parameters are used to manipulate the fuzzy controller of the robotic system to improve its control performance. The simulations for system uncertainty in the controller design emphasized the use of acceleration feedback for practical reasons. The simulation results also show that the proposed H∞ controller has excellent performance and reliability, and the effectiveness of the LMI-based method is also recognized. Therefore, this dynamic control method is suitable for seismic protection of civil buildings. The objectives of this document are access to adequate, safe, and affordable housing and basic services, promotion of inclusive and sustainable urbanization, implementation of sustainable disaster-resilient construction, sustainable planning, and sustainable management of human settlements. Simulation results of linear and non-linear structures demonstrate the ability of this method to identify structures and their changes due to damage. Therefore, with the continuous development of artificial intelligence and fuzzy theory, it seems that this goal will be achieved in the near future.

• Geomechanics and Engineering
• /
• v.30 no.1
• /
• pp.11-26
• /
• 2022

One of the most important issues in tunneling, is the squeezing phenomenon. Squeezing can occur during excavation or after the construction of tunnels, which in both cases could lead to significant damages. Therefore, it is important to predict the squeezing and consider it in the early design stage of tunnel construction. Different empirical, semi-empirical and theoretical-analytical methods have been presented to determine the squeezing. Therefore, it is necessary to examine the ability of each of these methods and identify the best method among them. In this study, squeezing in a part of the Alborz service tunnel in Iran was estimated through a number of empirical, semi- empirical and theoretical-analytical methods. Among these methods, the most robust model was used to obtain a database including 300 data for training and 33 data for testing in order to develop a machine learning (ML) method. To this end, three ML models of Gaussian process regression (GPR), artificial neural network (ANN) and support vector regression (SVR) were trained and tested to propose a robust model to predict the squeezing phenomenon. A comparative analysis between the conventional and the ML methods utilized in this study showed that, the GPR model is the most robust model in the prediction of squeezing phenomenon. The sensitivity analysis of the input parameters using the mutual information test (MIT) method showed that, the most sensitive parameter on the squeezing phenomenon is the tangential strain (ε_θ^α) parameter with a sensitivity score of 2.18. Finally, the GPR model was recommended to predict the squeezing phenomenon in tunneling projects. This work's significance is that it can provide a good estimation of the squeezing phenomenon in tunneling projects, based on which geotechnical engineers can take the necessary actions to deal with it in the pre-construction designs.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.1
• /
• pp.1-14
• /
• 2021

The study has been carried out with an objective to prepare Siberian roe deer habitat potential maps in South Korea based on three geographic information system-based models including frequency ratio (FR) as a bivariate statistical approach as well as convolutional neural network (CNN) and long short-term memory (LSTM) as machine learning algorithms. According to field observations, 741 locations were reported as roe deer's habitat preferences. The dataset were divided with a proportion of 70:30 for constructing models and validation purposes. Through FR model, a total of 10 influential factors were opted for the modelling process, namely altitude, valley depth, slope height, topographic position index (TPI), topographic wetness index (TWI), normalized difference water index, drainage density, road density, radar intensity, and morphological feature. The results of variable importance analysis determined that TPI, TWI, altitude and valley depth have higher impact on predicting. Furthermore, the area under the receiver operating characteristic (ROC) curve was applied to assess the prediction accuracies of three models. The results showed that all the models almost have similar performances, but LSTM model had relatively higher prediction ability in comparison to FR and CNN models with the accuracy of 76% and 73% during the training and validation process. The obtained map of LSTM model was categorized into five classes of potentiality including very low, low, moderate, high and very high with proportions of 19.70%, 19.81%, 19.31%, 19.86%, and 21.31%, respectively. The resultant potential maps may be valuable to monitor and preserve the Siberian roe deer habitats.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2709-2716
• /
• 2020

Compositions of large nuclear cores (e.g. boiling water reactors) are highly heterogeneous in terms of fuel composition, control rod insertions and flow regimes. For this reason, they usually lack high order of symmetry (e.g. 1/4, 1/8) making it difficult to estimate their neutronic parameters for large spaces of possible loading patterns. A detailed hyperparameter optimization technique (a combination of manual and Gaussian process search) is used to train and optimize deep neural networks for the prediction of three neutronic parameters for the Ringhals-1 BWR unit: power peaking factors (PPF), control rod bank level, and cycle length. Simulation data is generated based on half-symmetry using PARCS core simulator by shuffling a total of 196 assemblies. The results demonstrate a promising performance by the deep networks as acceptable mean absolute error values are found for the global maximum PPF (~0.2) and for the radially and axially averaged PPF (~0.05). The mean difference between targets and predictions for the control rod level is about 5% insertion depth. Lastly, cycle length labels are predicted with 82% accuracy. The results also demonstrate that 10,000 samples are adequate to capture about 80% of the high-dimensional space, with minor improvements found for larger number of samples. The promising findings of this work prove the ability of deep neural networks to resolve high dimensionality issues of large cores in the nuclear area.

• Journal of Information Processing Systems
• /
• v.20 no.2
• /
• pp.149-158
• /
• 2024

Traditional manual identification of crop leaf diseases is challenging. Owing to the limitations in manpower and resources, it is challenging to explore crop diseases on a large scale. The emergence of artificial intelligence technologies, particularly the extensive application of deep learning technologies, is expected to overcome these challenges and greatly improve the accuracy and efficiency of crop disease identification. Crop leaf disease identification models have been designed and trained using large-scale training data, enabling them to predict different categories of diseases from unlabeled crop leaves. However, these models, which possess strong feature representation capabilities, require substantial training data, and there is often a shortage of such datasets in practical farming scenarios. To address this issue and improve the feature learning abilities of models, this study proposes a deep transfer learning adaptation strategy. The novel proposed method aims to transfer the weights and parameters from pre-trained models in similar large-scale training datasets, such as ImageNet. ImageNet pre-trained weights are adopted and fine-tuned with the features of crop leaf diseases to improve prediction ability. In this study, we collected 16,060 crop leaf disease images, spanning 12 categories, for training. The experimental results demonstrate that an impressive accuracy of 98% is achieved using the proposed method on the transferred ResNet-50 model, thereby confirming the effectiveness of our transfer learning approach.

• Korean Journal of Animal Reproduction
• /
• v.11 no.2
• /
• pp.132-138
• /
• 1987

This study was carried out to evaluate the ability of clinical application of pregnancy diagnosis based upon the determinatin of progesterone in milk, utilizing a chymosin inhibitor labelled with progesterone and monoclonal antibody to progesterone, and its compared with progesterone concentrations in the milk were assayed by radioimmunoassay. 1. The progesterone concentration of the pregnant cows (2.07$\pm$0.54ng/ml) were significantly higher than those of non-pregnant cows (1.04$\pm$0.19 ng/ml), and thereafter began to increase and maintained high levels. 2. During 20 to 22 days after artificial insemination, the accuracy of pregnancy diagnosis from monoclonal antigen of progesterone were 92.9% for non-pregnant cows, and 88.5% for pregnant cows. 3. During 20 to 22 days after artificial inseminatin, the accuracy of pregnancy diagnosis from milk progesterone concentrations were 92.9% for non-pregnant cows(<3.4ng/ml), and 92.3% for pregnant cows( 4.0ng/ml). The average overall accuracy of pregnancy prediction for pregnant and non-pregnant cows were 92.6%. 4. Accordingly, the pregnancy diagnosis from monoclonal antigen of progesterone is thought to be recommendable because this early diagnostic means are simple with accurate result.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.61-66
• /
• 2022

Object classification is one of the main fields in neural networks and has attracted the interest of many researchers. Although there have been vast advancements in this area, still there are many challenges that are faced even in the current era due to its inefficiency in handling large data, linguistic and dimensional complexities. Powerful hardware and software approaches in Neural Networks such as Deep Neural Networks present efficient mechanisms and contribute a lot to the field of object recognition as well as to handle time series classification. Due to the high rate of accuracy in terms of prediction rate, a neural network is often preferred in applications that require identification, segmentation, and detection based on features. Neural networks self-learning ability has revolutionized computing power and has its application in numerous fields such as powering unmanned self-driving vehicles, speech recognition, etc. In this paper, the experiment is conducted to implement a neural approach to identify numbers in different formats without human intervention. Measures are taken to improve the efficiency of the machines to classify and identify numbers. Experimental results show the importance of having training sets to achieve better recognition accuracy.

• Korean Journal of Animal Reproduction
• /
• v.13 no.3
• /
• pp.157-163
• /
• 1989

This stduy was carried out to evaluate the ability of clinical application of pregnancy diagnosis based upon the determination of progesterone in serum, utilizing EIA-kit of progesterone concentrations in the serum were assayed by radioimmunoassay. 1. The progesterone concentrations of the pregnant cows(2.40$\pm$0.34ng/ml) were significantly higher than those of non-pregnant cows(1.03$\pm$0.09ng/ml), and thereafter began to increase and maintained high levels. 2. During 20 to 22 days after artificial insemination, the accuracy of pregnancy diagnosis from EIA-kit of progesterone were 95.0% for non-pregnant cows, and 92.3% for pregnant cows. 3. During 20 to 22 days after artificial insemination, the accuracy of pregnancy diagnosis from serum progesterone concentrations were 100% for non-pregnant cows(<1.4ng/ml), and 96.2% for pregnant cows( 2.0ng/ml). The average overall accuracy of prediction for pregnant and non-pregnant cows were 98.1%. 4. Accordingly, the pregnancy diagnosis from EIA-kit of progesterone is thought to be recommendable because this early diagnostic means are simple with accurate results.

• Journal of Distribution Science
• /
• v.12 no.1
• /
• pp.21-28
• /
• 2014

Purpose - This study aims to examine the Indian consumers'mall shopping patronage with the application of theory of planned behavior (TPB). The research intends to extend the TPB components (attitude, self-efficacy, subjective norms) with the addition of self-image and study their effect on Indian consumers' mall patronage intention. Research design, data and methodology - The research employed factor analysis to verify correct loading of items on corresponding factors and to confirm the applicability of constructs in the Indian context. The model was tested using stepwise regression analysis. Results -The results indicate a positive relationship between self-efficacy and intention to mall patronage. The findings show that self-image, attitude, self-efficacy, subjective norm significantly influence the mall patronage intention. Self-efficacy, which signifies self-competence and confidence in one's ability as a mall shopper indicates that as the self-efficacy increases Indian consumers' will eventually patronize malls. Conclusions - Self-image congruency plays a salient role in predicting mall-shopping patronage. The mall management should ensure that the mall marketing strategies incorporate it along with the other components of TPB to warrant decent footfall.

• Communications of Mathematical Education
• /
• v.37 no.4
• /
• pp.717-736
• /
• 2023

The purpose of this study is to develop a statistical program using data and artificial intelligence prediction models and apply it to one class in the sixth grade of elementary school to see if it is effective in improving students' statistical literacy. Based on the analysis of problems in today's elementary school statistical education, a total of 15 sessions of the program was developed to encourage elementary students to experience the entire process of statistical problem solving and to make correct predictions by incorporating data, the core in the era of the Fourth Industrial Revolution into AI education. The biggest features of this program are the recognition of the importance of data, which are the key elements of artificial intelligence education, and the collection and analysis activities that take into account context using real-life data provided by public data platforms. In addition, since it consists of activities to predict the future based on data by using engineering tools such as entry and easy statistics, and creating an artificial intelligence prediction model, it is composed of a program focused on the ability to develop communication skills, information processing capabilities, and critical thinking skills. As a result of applying this program, not only did the program positively affect the statistical literacy of elementary school students, but we also observed students' interest, critical inquiry, and mathematical communication in the entire process of statistical problem solving.