• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.550-557
• /
• 2003

In this study, a web-based system was developed by utilizing finite element method and virtual system designed using Virtual Reality Modeling Language (VRML). The simulation program for axi-symetric sheet forming is developed using finite flement method. The developed system consists of two modules, client module and server module. The client module was developed by using Active-X control. The input data for FEM calculation is transferred to the server module by using communication protocol. Then sever module performs several successive processes: input data generation, forming simulation, conversion of results to VRML format. After that, the results from the simulation can be visualized on the web browser in client computer. Besides, client module offers the capability to control and navigate on virtual forming machine and calculated result. By using this system simulation result can be investigated more realistically in virtual environment including forming machine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.335-344
• /
• 2014

In this paper we analysis for in out signal by previous study and implement virtual master that generate CGH processor signals. Also, we propose memory address mapping. By constructing the system model of our method and by analyzing the latencies according to the memory access methods in a system including our model and several other models, the low-latency memory access method has been obtained. The proposed method is reduce number of activation in DRAM.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.433-440
• /
• 2004

Since the numerical analysis was adopted in the mold design, lots of computational methods have been proposed for the simulations of casting processes for the various shaped molds. Today, it is possible to simulate the filling and solidification processes of most casts using the VOF technique. Though the three-dimensional numerical model based on the Cartesian coordinate system can be applied to any shape of cast, it becomes very inefficient when the three-dimensional model is applied to the cast of axi-symmetrical shape since the control volume includes at least 11 of the physical model. In addition, the more meshes should be distributed along the circumferential boundaries of curved shape in the Cartesian coordinate system fur the better results, while such curved circumferential boundary does not need to be considered in the two-dimensional cylindrical coordinate system. This motivates the present study i.e. developing a two-dimensional numerical model for the axi-symmetrically shaped casts. The SIMPLER algorithm, the VOF method, and the equivalent specific heat method have been adopted in the combined algorithm for the flow calculation, the free surface tracking, and the phase change heat transfer, respectively. The numerical model has been applied to the casting process of a pulley, and it was proven that the mesh and time effective calculation was accomplished comparing to the calculation using three-dimensional model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.388-391
• /
• 2002

We report our CAB system on thermal analysis for mould designer who is not expert of numerical simulation. Our mathematical model of thermal analysis is axi-symmetrically. It has an automatic mesh-generator that is based on Delaunay method, by using CAD data. And boundary conditions are also fitted automatically.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.407-419
• /
• 2008

In this study, the transition Reynolds number of compressible axi-symmetric sharp cone boundary layer is predicted by using a linear stability theory and the -method. The compressible linear stability equation for sharp cone boundary layer was derived from the governing equations on the body-intrinsic axi-symmetric coordinate system. The numerical analysis code for the stability equation was developed based on a second-order accurate finite-difference method. Stability characteristics and amplification rate of two-dimensional second mode disturbance for the sharp cone boundary layer were calculated from the analysis code and the numerical code was validated by comparing the results with experimental data. Transition prediction was performed by application of the -method with N=10. From comparison with wind tunnel experiments and flight tests data, capability of the transition prediction of this study is confirmed for the sharp cone boundary layers which have an edge Mach number between 4 and 8. In addition, effect of wall cooling on the stability of disturbance in the boundary layer and transition position is investigated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1914-1919
• /
• 2021

With the development of advanced industries, research on image processing hardware is essential, and timing verification at the gate level is required for actual chip operation. For FPGA-based verification, DDR3 memory interface was previously applied. But recently, as the FPGA specification has improved, DDR4 memory is used. In this case, when a previously used memory interface is applied, the timing mismatch of signals may occur and thus cannot be used. This is due to the difference in performance between CPU and memory. In this paper, the problem is solved through state optimization of the existing interface system FSM. In this process, data read speed is doubled through AXI Data Width modification. For actual case analysis, ZC706 using DDR3 memory and ZCU106 using DDR4 memory among Xilinx's SoC boards are used.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.62-69
• /
• 2015

Pressure change inside cabin as well as in tunnel has been calculated to assess the passenger pressure comfort of high-speed train. $C-STA^{TM}$, a CFD program based on axi-symmetric Navier-Stokes equation and Roe's FDS has been used to simulate the pressure change in tunnel during a high-speed train passing through it. To present the relative motion between the train and the tunnel, a modified patched grid scheme based on the structured grid system has been employed. The simulation program has been validated by comparing the simulation results with field measurements. Extensive parametric study has been conducted for various train speed, tunnel cross-sectional area and tunnel length to the pressure change in cabin. KTX-Sancheon(KTX2) high-speed train has been chosen for simulation and the train speed have been varied from 200 km/h to 375 km/h. The tunnel length has been varied from 300 m to 7.5 km and tunnel area from $50m^2$ to $120m^2$. Total 504 simulations have been conducted varying the parameters. Based on the database produced from the parametric simulations, minimum tunnel cross-sectional area has been surveyed for various train speeds based on Korean regulation on pressure change in cabin.

• Smart Structures and Systems
• /
• v.9 no.5
• /
• pp.461-472
• /
• 2012

This study proposes an optics-based active sensing system for continuous monitoring of underground pipelines in nuclear power plants (NPPs). The proposed system generates and measures guided waves using a single laser source and optical cables. First, a tunable laser is used as a common power source for guided wave generation and sensing. This source laser beam is transmitted through an optical fiber, and the fiber is split into two. One of them is used to actuate macro fiber composite (MFC) transducers for guided wave generation, and the other optical fiber is used with fiber Bragg grating (FBG) sensors to measure guided wave responses. The MFC transducers placed along a circumferential direction of a pipe at one end generate longitudinal and flexural modes, and the corresponding responses are measured using FBG sensors instrumented in the same configuration at the other end. The generated guided waves interact with a defect, and this interaction causes changes in response signals. Then, a damage-sensitive feature is extracted from the response signals using the axi-symmetry nature of the measured pitch-catch signals. The feasibility of the proposed system has been examined through a laboratory experiment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.226-229
• /
• 2008

최근 e-러닝에서 대두되고 있는 중요한 문제는 곳곳에 산재되어 있는 학습자의 포트폴리오 정보를 표준화 하여 기록하고 이를 학습자의 학습에 다시 활용해야 한다는 것이다. 이를 위해서는 학습자의 포트폴리오의 공유를 위해 포트폴리오의 표준화와 통합 및 관리하는 방법이 필수적이다. 본 연구에서는 개인의 학습이 여러 기관이나 여러 이러닝 사이트를 통해 이루어 지는 상황을 가정하고 포트폴리오를 IMS에서 발표한 ePortfoliio로 표현하며, 이를 Apache Axis를 사용하여 웹 서비스로 관리한다. 기록된 포트폴리오는 필요에 의해 하나로 통합하고 이를 기반한 역량 온톨로지로 변환되어 학습자의 다음 학습에 필요한 콘텐츠를 제시하는 근거로 활용할 수 있도록 하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.863-866
• /
• 2003

최근 많은 개발자들이 웹 서비스를 기업 내 어플리케이션 통합에서부터 기업간 데이터 전송에 이르기까지 모든 종류의 문제를 해결할 수 있는 솔루션으로 전망한다. 본 논문에서는 이러한 웹 서비스를 구현할 수 있는 기반을 제공하는 SOAP 프로토콜을 기반으로 하여 좀 더 효율적인 메시지 처리 방법을 통해 관련 전자상거래 시스템에 응용하기 위한 방안을 모색한다. 아울러 분산된 이기종 시스템간에 객체들 사이의 메시지 전송을 위하여 XML 메시지를 생성하고, SOAP Tool Kit 즉, AXIS를 통해 좀 더 효율적인 정보 공유 방안을 제시한다. 그리고 관련 사례 연구로 분산된 상호 독립적인 어플리케이션들의 객체들 간의 원격 메시지 호출 과정을 테스트하는 주문 처리 시스템을 설계하고 구현한다.