• Journal of Korea Water Resources Association
• /
• v.44 no.9
• /
• pp.721-730
• /
• 2011

The objective of this study is to assess the availability of streamflow simulation using Radar-AWS Rain rate (RAR) data which is produced by KMA on real-time. Chuncheon dam upstream basin is selected as study area and total area is 4859.73 $km^2$. Mean Areal Precipitation (MAP) using AWS and RAR are calculated on 5 subbasin. The correlationship of hourly MAPs between AWS and RAR is weak on ungauged subbasins but that is relatively high on gauged ones. We evaluated the simulated discharge using the MAPs derived from two data types during flood season from 2006 to 2009. The simulated discharges using AWS on Chuncheon dam (gauged basin) are well fitted with measured ones. In some cases, however, discharges using AWS on Hwacheon dam and Pyeonghwa dam with some ungauged subbasins are overestimated on the other hand, ones using RAR in the same case are well fitted with measured ones. The hourly RAR data is useful for the real-time river forecast on the ungauged basin in view of the results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.353-361
• /
• 2019

Using Fervidobacterium islandicum AW-1, keratin peptides were produced and confirmed factors related to the scalp and hair. The cytotoxicity and proliferation tests as a function of the concentration of the keratin peptide did not show toxicity and effect on the cellular proliferation in the immortalized human hair dermal papilla cell line. Hair shampoos and hair essences containing keratin peptides were produced, and conducted human patch test. Result showed no skin irritation. The shampoo and the essence were apploed to 2 groups of 30 healthy adults for 4 weeks and showed statistically significant positive results for gloss, hair loss, scalp trouble, and hair roughness by visual assessment. The scalp water content was significantly increased after 2 and 4 weeks compared to before using the shampoo or the essence. Trans-epidermal water loss (TEWL) and the sebum secretion amount in the scalp were significantly decreased after 4 weeks compared to before. The frictional force against combing before and after using the hair shampoo and the essence for normal hair tress and damaged hair tress was significantly changed. The combing force was increased for normal hair tress and decreased for damaged hair tress. In conclusion, we suggest that keratin peptides are appropriated as cosmetic ingredients to be used in hair and scalp related products.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.377-381
• /
• 2007

The aim of this study was to evaluate the microbial safety and quality changes of Korean sliced pork jerky, and to investigate these properties over 90 days and 28 days of storage at room temperature $(25^{\circ}C)$ and elevated temperature $(35^{\circ}C)$. Based on the microbial counts of pork jerky, mesophilic bacteria were detected at 2.50 log CFU/g at day 0. The mesophilic bacterial count did not change significantly for all samples, and coliform bacteria and Bacillus cereus were not detected in any samples during storage at either $25^{\circ}C\;or\;35^{\circ}C$. The following physicochemical qualities were also investigated: TBA value, Aw, and pH. In the case of $25^{\circ}C$ storage, the Aw of Korean sliced pork jerky was 0.72 at day 0, and was reduced to 0.58 after 90 days of storage. The TBA value increased as the storage time increased, and was 0.52 after 90 days of storage. The pH of all samples did not change significantly. In the case of $35^{\circ}C$ storage, the TBA, Aw, and pH values were not significantly different from those obtained during $25^{\circ}C$ storage. In addition, the sensory properties of all samples were not significantly different between storage at the two temperatures. In conclusion, these results suggest Korean sliced pork jerky could be used to study the development of commercial pork jerky.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.42-46
• /
• 2007

We evaluated the microbial safety and quality characteristics of Korean slice beef jerky, and investigated these properties over 28-day and 90-day storage periods at room temperature ($25^{\circ}C$) and elevated temperature ($35^{\circ}C$). After microbial counts of all samples, mesophilic bacteria were detected at 1.23 Log CFU/g at day 0. Counts of mesophilic bacteria did not change significantly in all samples, and coliforms and Bacillus cereus were not detected in all samples during storage at either $25^{\circ}C$ or $35^{\circ}C$. TBA values, Aw, and pH were investigated. The Aw of korean slice beef jerky stored at room temperature was 0.71 at day 0, and was reduced to 0.61 after 90 days. The TBA value increased as storage time increased, and its TBA value was 0.48 after 90 days of storage. The pH of all samples did not change significantly. At $35^{\circ}C$ storage, TBA values, Aw, pH were not significantly different than those stored at $25^{\circ}C$. Also, the sensory properties of all samples were not significantly different between two storage temperatures. In conclusion, these results suggest Koran slice beef jerky ould be used as basic study for development of the commercial beef jerky.

• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.45-52
• /
• 2018

This study identifies the cause of the accident and presents a new concept for safe urban stream management by numerical simulating the flood event of Cheonggyecheon on August 17, 2017, using rain data measured through a dense weather observation network. In order to simulate water retention in the CSO channel listed as one of the causes of the accident, a reliable urban runoff model(XP-SWMM) was used which can simulate various channel conditions. Rainfall data measured through SK Techx using SK Telecom's cell phone station was used as rain data to simulate the event. The results of numerical simulations show that rainfall measured through AWSs of Korea Meteorological Administration did not cause an accident, but a similar accident occurred under conditions of rainfall measured in SK Techx, which could be estimated more similar to actual phenomena due to high spatial density. This means that the low spatial density rainfall data of AWSs cannot predict the actual phenomenon occurring in Cheonggyecheon and safe river management needs high spatial density weather stations. Also, the results of numerical simulation show that the residual water in the CSO channel directly contributed to the accident.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1711-1720
• /
• 2020

Particulate matter (PM) that has been artificially generated during the recent of rapid industrialization and urbanization moves and disperses according to weather conditions, and adversely affects the human skin and respiratory systems. The purpose of this study is to predict the PM10 concentration in Seoul using meteorological factors as input dataset for multiple linear regression (MLR), support vector machine (SVM), and random forest (RF) models, and compared and evaluated the performance of the models. First, the PM10 concentration data obtained at 39 air quality monitoring sites (AQMS) in Seoul were divided into training and validation dataset (8:2 ratio). The nine meteorological factors (mean, maximum, and minimum temperature, precipitation, average and maximum wind speed, wind direction, yellow dust, and relative humidity), obtained by the automatic weather system (AWS), were composed to input dataset of models. The coefficients of determination (R2) between the observed PM10 concentration and that predicted by the MLR, SVM, and RF models was 0.260, 0.772, and 0.793, respectively, and the RF model best predicted the PM10 concentration. Among the AQMS used for model validation, Gwanak-gu and Gangnam-daero AQMS are relatively close to AWS, and the SVM and RF models were highly accurate according to the model validations. The Jongno-gu AQMS is relatively far from the AWS, but since PM10 concentration for the two adjacent AQMS were used for model training, both models presented high accuracy. By contrast, Yongsan-gu AQMS was relatively far from AQMS and AWS, both models performed poorly.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.2
• /
• pp.225-232
• /
• 1997

A total of 1088 observations (272 in B, 272 in V, 272 in R, and 272 in I) were made from January to February in 1995 at Chungbuk National University observatory(CbNUO). We constructed BVRI light curves with our data. The photometric solution of these light curves was obtained by means of the Wilson-Devinney method. Our result was compared with those by previous investigators.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.123-131
• /
• 2002

Solvolyses rate constant of 1- and 2- naphthoyl chlorides (1 and 2) are reported for aqueous binary mixtures with methanol, ethanol, fluorinated alcohol, acetonitrile and dioxane. Kinetic solvent isotope effects (KISE) in methanol and product selectivities (S) of 2-naphthoyl chloride (2) in alcohol-water are also reported. Dispersions in Grunwald-Winstein correlations $(r{\leq}0.901)$ are discussed by multiple regression analysis incorporating ionizing power $(Y_{Cl})$ scale and rate-rate profiles. Major causes for these phenomena are investigated as an aromatic ring solvation effects, in conjunction with weakly nucleophilic solvation effects ($S_N2$ character), for solvolyses of 1 and for solvolyses of 2, as dual reaction channels, described as $S_N1$-$S_N2$ and $S_AN$-$S_N2$ processes. Distinct border lines between the two pathways are derived from solvolyses rates of 2 in 18 solvent using the results of $log(k/k_o)=mY_{Cl}+lN_T+hI$ plot with values of 1.13 for m, 0.37 for l and 0.15 for h value in 5 aqueous fluorinated alcohol mixtures. Using rate-product correlation, the validity of a third order model based on a general base catalyzed by solvent and contribution from these rate constants, $k_{aa},\;k_{aw}$ and $k_{aw}$, are investigated for $S_AN$-$S_N2$ solvolyses of 2 favored in more rich alcohol media and gradual addition of water to alcohol solvent shows a great shift away from stoichiometric solvation to predominantly medium effects. Rate-rate correlation between solvolyses of 2 and trimethyl acetylchloride (5) with alkyl group in the 29 aqueous solvent mixtures shows appreciable linearity (slope = 0.84, r = 0.987), caused by the same pathway ($S_N1$-$S_N2$ process), even if this correlation coincides with appreciable dispersion (different solvation effect).

• Bulletin of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.431-436
• /
• 2003

Solvolytic rate constants at 25℃ are reported for solvolyses of cinnamyl bromide (1) in binary mixtures of water with acetone, ethanol, methanol, methanol-d, and 2,2,2-trifluoroethanol. Product selectivities are reported for solvolyses of 1 in aqueous ethanol and methanol. Rate ratios in solvents of the same $Y_{Br}$ value and different nucleophilicity provide measures of the minimum extent of nucleophilic solvent assistance (e.g. $[k_{40EW}/k_{97TFE}]$Y = 2.88, EW = ethanol-water). With use of the extended Grunwald-Winstein equation, the l and m values are similar to the values of 0.43 and 0.88 obtained for the solvolyses of 1 using the equation (see below) which includes a parameter (I) for solvation of aromatic rings. The magnitude of l and m values associated with a change of solvent composition predicts the $S_{N1}$ reaction mechanism rather than an $S_{N2}$ channel. Product selectivities (S), defined by S = [ether product]/[alcohol product]×[water]/[alcohol solvent] are related to four rate constants for reactions involving one molecule of solvent as nucleophile and another molecule of solvent as general base catalyst. A linear relationship between 1/S and molar ratio of solvent is derived theoretically and validated experimentally for solvolyses of the above substrates from water up 75% 1/S = $(k_{wa}/k_{aw})$([alcohol solvent]/[water]) + $k_{ww}/k_{aw}$ alcohol-water. The results are best explained by product formation from a “free” carbocation intermediate rather than from a solvent-separated ion pair.