• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.45-53
• /
• 1998

Traction control systems(TCS) improve vehicle acceleration performance and stability, particularly on slippery roads through engine torque and/or brake torque control. This research mainly deals with the engine control algorithm based on adjustment of the engine throttle valve opening. Hardware-in-the-loop simulation(HWILS) is carried out where the actual hardware is used for the engine/automatic transmission and TCS controller, while various vehicle dynamics are simulated on real-time basis. Also, use of the dynamometer is made in order to implement the tractive force that a road applies to the tire. Although some restrictions are imposed mainly due to the capability of the synamometer, simplified HWILS results show that the slip control algorithm can improve the vehicle acceleration performance for low-friction roads.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.60-63
• /
• 2002

자동 변속기 차량은 여러 가지의 장점을 지니고 있으며, 쉬프트 맵의 특징이 수동 변속기 차량과는 달리 이미 규정된 패턴을 따른다 하지만 킥 다운, 킥 업, 리프트 풋 업 등의 현상이 어느 운전자에게나, 어떤 주행 상황에서나 일괄 적용되고 있기에 불만스러움을 느끼는 운전자가 있을 수 있다. 이에 본 논문에서는 지능형 자동 변속 시스템의 변속 결과에 따른 운전자의 불만 정도를 고려하고 다음 변속에 반영하도록 고안한 만족도 보정 기법을 제안하고자 한다 만족도 평가는 변속이후 운전자의 조작을 관찰하며, 불만족 정도에 따라 최종 쉬프트 선도의 조정을 결정하도록 고안하였으며, 변속 시스템의 변속 결정과 운전자의 스로틀 및 브레이크 조작을 입력으로 한 신경 회로망을 구성하여 학습하였다

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.11-18
• /
• 1985

세계경제가 만성적으로 저미한 상태에서, 전세계적으로 자동차 생산도 크게 성장하기를 바랄 수 없는 상황이 계속 되고 있다. 한편, 승용차의 기술면에서는, 배기가스 규제대응기술의 개발이 일 단락되고, 석유사정도 일단은 안정상태를 유지하고 있는 가운데, 자동차 본래의 기능 및 유용성을 높이기위한 기술개발에 힘을 기울여 왔다. 승용차의 구동방식에 대해서도 FF(Front Engine, Front Drive)방식이 세계적인 추세이고, 더욱이 4WD(사윤구동차)의 보급이 주목되고 있다. 또 이지 드라이브(Easy Drive)화에의 움직임도 강하여 AT(Automatic Transmission, 자동변속기)가 부착된 자동차의 비율이 검증하고 있으며, 유체토오크 컨버어터(Fluid Torque Converter)와 유 성치차장치(Planetary gear)식의 변속 장치를 조합한 AT는 전자제어기술에 의한 정확한 제어로 그 완성도가 더욱더 높아지고 있다. 또 종래로부터 새로운 AT로서의 기술동향이 주목되고 있 었든 CVT(무단변속기)도 실용화 기술의 개발이 진척되어 일부 양산화 모델의 발표도 있으며, CVT가 AT중에서 그위치를 크게 차지하게 될 날도 머지않은 것으로 생각된다. 이하 근년 관심이 높아지고 있는 4WD 및 AT를 중심으로 승용차의 구동방식과 그 기구의 동향을 해설하기로 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.171-176
• /
• 2002

This paper is the study on stress analysis of spur gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when a pair of gear contact.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.816-819
• /
• 2002

This paper is the study on stress analysis for tooth modification of high speed gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when gear tooth contacts. And this paper proposes method for the tooth modification after carrying out stress analysis using a finite element method.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.99-109
• /
• 1992

The response characteristics of a CVT vehicle is investigated numerically by using a Bondgraph model. Simulation result show the continuous behavior of the engine and the speed ratio for the CVT vehicle compared to the discrete behavior of the automatic transmission. Also, the optimal operation of the CVT which is derived from the speed ratio-torque-axial force equation from the previous works. It is found that the speed ratio of CVT has to be controlled corresponding to the optimal CVT ratio that makes the engine run on the optimal operating line.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.100-105
• /
• 2010

This study is to analyze the performance for ADS-B(Automatic Dependent Surveillance-Broadcast) operations by the Balanced Scorecard(BSC). It is also to collect the opinions of users(pilots, air traffic controllers and ground operators) relating ADS-B and to use the results as data about preparing political measures of aviation safety. For these purpose, BSC model redesigned on 4 different points of view is used for measuring the performance of the ADS-B operation. The proposed perspectives are affairs effectiveness, user orientation, system orientation and the capacity. As the results of this study, it is showed that the continuous development of ADS-B should be required and the users must be involved in the activities, additionally, the relevant authorities should try to be drawn the user-oriented results through the process.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.2
• /
• pp.113-121
• /
• 2013

Heumgyeonggaknu is a water-hammering type automatic water clock which was made by Jang Yeong-Sil in 1438. The water clock that is located in Heumgyeonggaknu consists of Suho which is equipped with 2-stage overflow. Constant water wheel power is generated by supplying a fixed amount of water of Suho to Sususang, and this power is transferred to each floor at the same time. The 1st floor rotation wheel of Gasan consists of the operation structure which has the shape of umbrella ribs. The 2nd floor rotation wheel is made so that the 12 hour signal, Gyeong-Jeom signal, and Jujeon constitute a systematic configuration. The 3rd floor rotation wheel is made so that the signal and rotation of Ongnyeo and four gods can be accomplished. Based on the above conceptual design, this paper analyzed the internal signal generation and power transmission of Heumgyeonggaknu.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.164-166
• /
• 2006

Wien Automatic System Planning Package (WASP) which is used to draw out generation expansion planning applies Dynamic Programming in Korea power system panning. While this package has an advantage that computes annual capacity, it has a disadvantage that can't consider environmental constraints. With the effectuation of the Kyoto Protocol in February, 2005, it is expected that CO2 emission has a severe effect on Korean power system. Therefore, as the most important issue, the generation expansion planning considering environmental constraints is rising in power system. This paper develops a mathematic model including not only generation expansion planning but transmission planning and considering regional supply-demand and environmental constraints, especially CO2 emission, and verifies propriety through the case study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.336-341
• /
• 2014

When using a higher-order modulation scheme, there are variations in bit-reliability depending on the bit position in a modulation symbol. Variations of bit-reliability in the codeword block lower the decoding performance. Also, the decoding performance increases as the sum of the bit-reliabilities in the codeword block increases. This paper presents a novel hybrid automatic repeat request scheme that increases the sum of the reliabilities of the transmitted bits by lowering the modulation order, and decreases the variations of bit-reliability in the codeword block by preferentially retransmitting bits with low reliability. The proposed scheme outperforms the constellation rearrangement scheme. Furthermore, the proposed scheme also provides a good solution in cases where the size of the retransmission block is smaller than the size of the initial transmission block.