• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.205-211
• /
• 2002

본고에서는 최근 논의되고 있는 ATP 도입의 필요성 및 시스템 선정의 적절성을 검토하는데 있어서 철도신호 분야 뿐만이 아닌 우리의 환경변화 여건 등을 종합적으로 고려하여 철도의 장기 발전전략에 부합하는 APT 도입 방안을 제시하였다. ATP 도입시 고려해야 할 주요 환경변화로는 고속철도개통, 기존철도시스템과의 조화와 관련한 기술발전 측면, 틸팅차량 등 기존선 속도향상, 전철화, 복선화 등 철도영업거리 확장 및 남북철도연결 등을 고려해야 할 것이다. 즉, 바람직한 차상신호장치 도입을 위해서는 차량과의 적합성에 있어서는 기존차량, 특히 속도계장치와의 호환성, 시설분야에 있어서는 설치작업 및 향후 유지보수의 용이성과 국산화 가능성, 향후 남북철도 연결과 고속 철도의 기존선 연계운행 등을 종합적으로 고려하고 장기적인 철도발전에 도움이 되는 방향으로 추진되어야 할 것이다. 결론적으로, 우리철도의 기반시설과 차량 등의 현황과 향후 변동요인을 반영하여 가장 바람직한 ATP 표준기준을 용역 등을 통해 설정하고, 업체선정, 적어도 1년 정도의 시험기간을 거쳐 실용화 단계로 접근해야 할 것이다.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.85-89
• /
• 2019

Cell-free protein synthesis utilizes the translational machinery in a cell extract. Unlike the conventional cell-based expression methods, not being affected by the conditions for cell growth, cell-free protein synthesis enables flexible manipulation of individual factors affecting the efficiency protein biosynthesis. However, the high cost and low stability of the energy sources to regenerate ATP have limited the use of cell-free synthesis for large-scale production of recombinant proteins. One of the approaches to address this problem is to use glucose as an alternative energy source to regenerate ATP through the glucose-metabolizing pathways in a cell extract. In this study, in an attempt to improve the efficiency of ATP regeneration by reinforcing oxidative phosphorylation process, we supplemented with cellular lipids to a glucose-fueled reaction mixture for cell-free protein synthesis. As a result of the lipid supplementation, the productivity of chloramphenicol acetyltransferase in a cell-free synthesis system using glucose increased more than 6 fold compared to when the lipid was not supplemented.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1012-1013
• /
• 2008

경부고속철도의 개통과 함께 서울-부산 간 운행시간이 새마을호 기준 4시간 30분에서 2시간으로 단축되는 등 획기적인 시간 절감을 이루었으나 이는 고속철도가 운행되는 지역에 국한된 것이다. 이에 고속철도 비 수혜지역의 운행시간 단축을 위해 기존선 속도향상이 요구되며, 이러한 목적으로 한국철도기술연구원에서는 틸팅열차를 개발하여 시운전 10만Km를 목표로 시험운행중이다. 또한 한국철도공사에서는 이와 유사한 목적으로 기존선 신호시스템인 ATS 시스템을 차상신호시스템(ATP)으로 개량하는 사업이 추진되고 있다. 현재 틸팅열차에는 기존의 ATS(자동열차정지장치) 차상장치만을 장착하여 차량의 성능 확인을 위한 시험 및 시운전을 우선적으로 추진하고 있는 상태이며 이러한 ATS 차상장치는 160km/h 이하의 속도에서만 본연의 기능이 유지되고, 그 이상의 속도에서는 현실적으로 사용이 어렵기 때문에 틸팅열차의 목표속도인 200km/h에서 적합하게 시험하기 위해서는 적합하지 않다. 따라서 한국철도공사에서 추진하고 있는 ATP 구축사업의 지상설비와 연계될 수 있는 ATP 차상장치를 설치하여 시험을 하여야 한다. 본 논문에서는 이를 위하여 ATP 차상장치의 틸팅열차 적용에 대한 연구를 추진한 결과를 발표하고자 한다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1841-1848
• /
• 2010

Electric railway system consist of rolling stock, track, signal and streetcar line system. ATP(Automatic Train Protection) system in railway signaling system is the important one grasping the position and velocity of a train. The wayside transmitter of ATP system is installed between rails. Recently, the research about increasing train speed has been developed in total departments of the railroad systems. The study on the information transmission between on-board transmitter and wayside transmitter is required for increasing the train speed in the ATP system. When the train speed is increased as to same transmissi on distance, the problem on information transmission occurs because the transmission time is decreased. In case that the transmission distance is extended, the transmission time is decreased with respect to the train speed. Therefore, we have to define the standard magnetic intensity as to the train speed in order to transmit correctly telegram. In this paper, the transmission distance for the telegram is suggested on the basis of the train speed. Also, the standard magnetic intensity from the wayside transmitter to on-board transmitter is proposed by using transmission distance regarding the train speed in the ERTMS/ETCS system by using Matlab program.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.691-706
• /
• 2008

ATP(Automatic Train Protection) system in railway signaling system is the important one grasping the position and velocity of a train. The wayside transmitter of ATP system is installed between rails. In concrete slab track, the signal current using wayside transmitter of ATP system is influenced by reinforcing bars. The magnetic coupling between reinforcing bars and wayside transmitter of ATP system as a filter makes an input current distorted. So, it makes an alternating current signal with a desirable size not transmit to on-board system of a train. Way to decrease the distortion of an input current signal frequency is to avoid maximum induction current frequency. And the induction phenomenon between reinforcing bars insulated and wayside transmitter of ATP system does not occur. In this paper, we represent the model about wayside transmitter of ATP system and reinforcing bars on the concrete slab tracks, and calculated the parameters demanded for the model. Also, we demonstrated it through the Maxwell program. Furthermore, we calculated impedance on wayside transmitter used in KVB system and ERTMS/ETCS system which are a kind of ATP system, frequency response of induction current, using the Matlab, and demonstrated the validity of it, using the PSpice program.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.567-572
• /
• 2009

The underwater launch system using an ATP consists of five parts: compressor tank, proportional flow control servo valve, expulsion spool valve, air turbine pump, and discharge tube. The purpose of this study is to develop an underwater launch system using an ATP and to verify the validity of the system. The proportional flow control servo valve is modeled as a 2nd order transfer function. The projectile is ejected by pressurized water through the air turbine pump, which is controlled by expulsion valve. The mathematical model is derived to estimate the dynamic characteristics of the system, and the important design parameters are derived by using simulations. The computer simulation results show the dynamic characteristics and the possibility of control for underwater launch system.

• Journal of the Korean Society for Railway
• /
• v.14 no.2
• /
• pp.121-129
• /
• 2011

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC or EN standard which is commonly applied to railway system for Automatic Train Protection (ATP) system in accordance with ERTMS/ETCS Level 1 system. This also shows approach methods and relative activities for project lifecycle to accomplish and ensure the system requirements of ATP system, RAMS and system quality activities. These kind of activities for quality assurance of ATP system to obtain Safety Certificate could improve the quality of domestic railway system based on On-Board system of ERTMS/ETCS Level 1 and also contribute to the growth of railway business.

• IE interfaces
• /
• v.13 no.3
• /
• pp.405-415
• /
• 2000

The accurate quotation of Available-To-Promise (ATP) plays a very important role in enhancing customer satisfaction and fill rate maximization. However, the complexity of Supply Chain structure, which includes all the linkages among procurement, production, and distribution, makes the accurate quotation of ATP be a quite difficult job. This paper presents a computerized ATP quotation system in global SCM environments where the worldwide headquarter, distribution centers, and manufacturing facilities are globally networked. We modeled the ATP quotation processes with the definition of required data flow and a comprehensive ATP-algorithm was newly developed. The illustrative example shows the efficiency of the proposed system is largely affected by the selection of alternative rules used in ATP-algorithm.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.119-122
• /
• 2010

본 논문에서는 틸팅열차의 안전성 확보 및 운행효율 향상을 위해 "한국형 틸팅열차 신뢰성 평가 및 운용기술개발" 연구과제의 한 분야로 추진된 ATP 차상장치의 설치 및 시운전시험에 대한 내용 및 결과를 제시하고 있다. 한국철도기술연구원에서는 기존선의 속도 향상과 KTX 비수혜지역의 여객 서비스 향상을 위해 틸팅열차를 개발하였으며 개발된 틸팅열차의 신뢰성 평가를 위해 기존에 사용되고 있는 ATS 장치에 의한 10km 주행 시운전 시험을 진행하였다. 국토해양부에서는 KTX가 운행되지 않는 지역인 중앙선 및 충북선을 비롯한 7개 기존 노선을 200km/h 이상으로 고속화하기로 하였으며, 이에 따라 열차제어시스템은 기존의 ATS 장치에서 ATP 장치로 개량하여야 한다. 따라서 틸팅열차에도 ATP 차상장치를 설치하여 운행 적합성을 확인하여야 하기 때문에 한국철도공사의 경부선 및 호남선 ATP 구축사업에 사용된 것과 동일한 ATP 차상장치를 틸팅열차에 설치하여 시험하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1587-1588
• /
• 2013