• Journal of Animal Science and Technology
• /
• v.66 no.1
• /
• pp.135-144
• /
• 2024

The objective of this study was to investigate the influence of feeding frequency on a sow's reproductive performance and stress response during gestation. A total of twenty multiparous sows (Yorkshire × Landrace) were used in a completely randomized design based on their parity, body weight (BW), and backfat thickness (BFT), and the sows were allotted to two different feeding systems: 1) once daily feeding (OF) and 2) twice daily feeding (TF) in corn-soybean meal based diets. The gestation diet was formulated to contain 3,265 kcal of metabolizable energy (ME) / kg, 12.90% of crude protein (CP), and 0.75 % of total lysine. The lactation diet was formulated to contain 3,265 kcal of ME / kg, 16.80% of CP, and 1.08% of total lysine and provided ad libitum during lactation. In gestation, sow BFT and BF changes were not affected by feeding frequency, but higher BW and BW gain from day 35 to 90 and day 35 to 110 were observed in OF sow (p < 0.10). In lactation, feeding frequency did not influence on BW, BW gain, BFT, BF changes, average daily feed intake, and wean-to-estrus interval. Also, there were no differences in litter size, litter weight and piglet weight in lactating sows. OF sows had higher (p < 0.05; p < 0.10) protein, solid-not-fat, and total solid concentrations in colostrum compared to TF sows, while OF sows had a lower (p < 0.05) lactose concentration in colostrum compared to TF sows. Sows in OF showed significantly lower average daily water consumption (ADWC) from day 35 to 110 of gestation (p < 0.05). While there were no significant differences in stereotypic behaviors and salivary cortisol levels during gestation between treatments, the OF sows showed less time spending on the activity at day 105 (p < 0.05). In conclusion, reduced feeding frequency increased BW gain during gestation, decreased activation time, and changed the colostrum composition. This information may contribute to the understanding of the physiological and behavioral change of gestating sows by manipulating feeding frequency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.685-692
• /
• 2003

Information on nutrient requirements and forage intake of fallow weaner deer is required for the development of feeding strategies during the year. An experiment was conducted in which 60 fallow weaner deer (grazing on medic and ryegrass based pastures) were supplemented with a concentrated diet at three levels. The diet contained 2% minerals, 30% lupin and 68% barley grain. Twelve deer from each treatment were dosed with commercial alkane capsules in May, June, July, September and October to predict nutrient intake. The relationships between body weight gain and intake of metabolisable energy and crude protein were established using a general linear models analysis. Dry matter intake from pastures ranged from 0.137 kg to 0.304 kg in May and June and increased to 1.2 kg in October. Nutrient intake from pastures was strongly influenced by amount of supplementary feed and gender. Digestible energy intake from pastures was 1.3, 3.8 and 6.1 MJ/day higher for males than females in July, August and October, respectively. The protein and energy intake was strongly correlated with body weight gain. The energy requirement for maintenance were 7.3, 8.2, 10.2, 10.2 and 10.7 MJ DE/day and the DE required for each kg body weight gain were 19, 18, 29, 34 and 49 MJ in May, June, August and October, respectively. The protein requirement for maintenance was 12.2, 12.6, 15.0, 11.4 and $8.5g/W^{0.75}$ in May, June, July, August and October, respectively. The nutrient requirement defined from this study can be used to assist farmers to explore the possible pasture and stock management practices under southern Australian conditions. However, further research is required to develop rapid and cheap methods for estimating dry matter intake, nutritive value of pastures and to quantify the potential growth rate of fallow deer in southern Australia.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.1-7
• /
• 2007

Generally, an electric railroad feeding system has many problems due to the different characteristics in contrast with a load of general three-phase AC electric power system. One of them is harmonics problem caused by the switching device existing in the feeding system, and moreover, the time-varying dynamic loads of rail way is inherently another cause to increase this harmonics problem. In Korea power systems, the electric railroad feeding system is directly supplied from the substation of KEPCO. Therefore, if voltages fluctuation or unbalanced voltages are created by the voltage and current distortion or voltage drop during operation, it affects directly the source of supply. The trainloads of electric railway system have non-periodic but iterative harmonic characteristics as operating condition, because the electric characteristic of the electric railroad feeding system is changed by physical conditions of the each trainload. According to the traditional study, the estimation of harmonics has been performed by deterministic way using the steady state data at the specific time. This method is easy to analyze harmonics, but it has limits in some cases which needs an assessment of dynamic load and reliability. Therefore, this paper proposes the probabilistic estimation method, moments matching method(MW) in order to overcome the drawback of deterministic method. In this paper, distributions for each harmonics are convolved to obtain the moments and cumulants of TDD(Total Demand Distortion), and this can be generalized for any number of trains. For the case study, the electric railway system of LAT(Intra Airport Transit) in Incheon International Airport is modeled using PSCAD/EMTDC dynamic simulator. The raw data of harmonics for the moments matching method is acquired from simulation of the LAT model.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.387-396
• /
• 2003

This experiment was carried out to compare the effects of feeding commercial formula feed and rice straw separately (control) versus a total mixed ration (TMR) on productivity of Hanwoo steers in late stage of fattening and on ruminal fermentation characteristics and digestibilities. Ruminal digesta from the cannulated cattle were sampled at 0, 1, 2, 3, 5, 8 hour after feeding. The steers fed TMR consumed 7.4kg per day and there was no difference between feeding systems. Daily weight gain was not significantly (P>0.05) between feeding systems, however, TMR group showed lower daily gain than control group. The amount of feed consumption per kg weight gain was higher in TMR group than control group (10.5kg and 9.7kg, respectively), resulting in a greater efficiency of feed utilization for gain. In the result of appearance rates of quality grade A were 33% higher for TMR group than those in control group. Appearance rates of grade 1 showed 56% and 75% when fed the control and TMR, respectively. Digestibilities of dry matter, crude protein, crude fiber and gross energy for TMR treatment were significantly higher (P<0.01) than those of control. Prior to feeding (0 h) and each subsequent hour, the TMR resulted in higher rumen pH (P<0.05) when compared with control ration. The concentration of NH3-N for TMR treatment maintained at higher level up to 8hr after feeding, especially increased up to 28.2mg/$d\ell$ during 1-2 hour which was two times (P<0.05) more than control. The amount of total VFA showed same trends between feeding systems. However, the ratios of branched chained fatty acid such as iso-butyric acid and iso-valeric acid for TMR treatment were significantly(P<0.01) higher than control for 3-5hr. Results showed that TMR in these trials is effective feeding system for fattening Hanwoo steers in the respect of ruminal characteristics, total tract digestibility and productivities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1458-1470
• /
• 2018

In this letter, a new dual-port Multiple-Input Multiple-Output (MIMO) antenna is introduced which has two independent signal feeding ports in a single antenna element to achieve smaller antenna volumes for the 5G mobile applications. The dual-port structure is implemented by adding a cross coupled semi-loop (CCSL) antenna as the secondary radiator to the ground short of inverted-F antenna (IFA). It is found that the port to port isolation is not deteriorated when an IFA and CCSL is combined to form a dual-port structure. The isolation property of the proposed antenna is compared with a polarization diversity based dual-port antenna proposed in the literature [9]. The operating frequency range is 3.3-4.0 GHz which is suitable for places where $4{\times}4$ MIMO systems are supposed to be deployed such as in China, EU, Korea and Japan at the band ${\times}$ (3.3 - 3.8GHz. The measured 6-dB impedance bandwidths of the proposed antennas are larger than 700 MHz with isolation between the feeding ports higher than 18 dB [1-2]. The simulation and measurement results show that the proposed antenna concept is a very promising alternative for 5G mobile applications.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.3
• /
• pp.358-365
• /
• 2007

This paper deals with a novel solid state controller (NSSC) for parallel operated isolated asynchronous generators (IAG) feeding 3-phase 4-wire loads in constant power applications, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of asynchronous generators. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 4-leg voltage source converter (CC-VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The complete system is modeled in MATLAB along with simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of isolated generating system consisting of NSSC and parallel operated asynchronous generators driven by uncontrolled pico hydro turbines and feeding 3-phase 4-wire loads.

• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.874-883
• /
• 2009

This paper deals with an integrated voltage and frequency (VF) controller for isolated asynchronous generators (IAG) driven by a constant power pico-hydro uncontrolled turbine feeding three-phase four-wire loads. The proposed VF controller is used to control the frequency and voltage of an IAG with load leveling. Such a VF controller is also known as an integrated electronic load controller (IELC) which is realized using an isolated star/polygon transformer with a voltage source converter (VSC) and a battery at its DC bus. The proposed generating system with a VFC is modeled and simulated in MATLAB along with Simulink and Simpower system (SPS) toolboxes. The simulated results are presented to demonstrate the performance of an isolated asynchronous generator feeding three-phase four-wire loads with neutral current compensation.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.97-106
• /
• 2003

One of the obstructing factors against managing dairy fm has been heavy labor requirement for feeding dairy cows. A Power-tiller TMF mixer was developed to reduce the cost and to provide economic benefit. The TMF mixer was desisted by the feeding capacity of 20∼30 heads at a batch with various functioning systems of auger type mixer, delivery conveyer, weighing console, pipe heater type heating system, power transmission train and mounting trailer. According to the study resulted, it showed that 1,200rpm, 1,600rpm, 2,000rpm and 2,300rpm were 6ps. Bps, lops and 12ps respectively. and that reduced shaft output by 15%. On the fodder mixer attached powertiller, initial output was necessary large torque. And the heating system was maintaining uniform temperature 60$^{\circ}C$ relatively.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.29-35
• /
• 1988

When low sliding velocities in the boundary lubrication range are operating, irregular movements frequently occur which are a result of the stick-slip phenomenon. Such slide motions are undesirable in precision machine tools, particularly with feed back systems used in numerical and adaptive control machine tools. Accordingly, this paper reports analytical and experimental studies in the stick-slip characteristic of machine tool feeding system. The main conclusions of this study are as follows; The tendency towards stick-slip effects may be reduced by; 1). Reducing the drop in friction coefficient in the Stribeck curve(on the rising part of the friction characteristic at higher sliding speeds, the system is stable all the time) 2). Reducing the transition velocity by the use of a higher viscosity lubricating oil. 3). Increasing the stiffness(Damping)and reducing normal load(Sliding mass) Therefore, the Critical velocity is decided from the above conclusions and in designing of machine tool, feed rates(sliding velocity)must be design the more than critical velocity.

• Ocean Science Journal
• /
• v.43 no.1
• /
• pp.61-65
• /
• 2008

Feeding apparatus, mechanism and passage of ingested prey were described for Nemopilema nomurai (Scyphozoa: Rhizostomeae). N. nomurai medusae without central mouths have developed complicated canal systems connecting the tip of the tentacle and oral arm to the gut cavity. The number of junctions in the canal system increases with the bell diameter. The prey is gathered by paralyzing nematocyst at the tentacles and by adhering cirri at the oral arms and scapulets. They are engulfed into the terminal pore located at the oral arms and scapulets, and entered into the gut cavity via the canal system. The estimated digestion time is 1 hour and 20 min. The diameter of terminal pore is always about 1 mm, implying that they could not eat prey larger than that pore size. On the other hand, ephyrae have central mouths and could swallow prey as large as adults could. Exploitation of the same size of food by adult and ephyra implies that N. nomurai can affect seriously the whole food web, massively ingesting micro- and mesozooplankton and cutting the energy transfer toward the higher level of carnivores.