• Management Science and Financial Engineering
• /
• v.17 no.2
• /
• pp.23-37
• /
• 2011

In this paper, we address a layout design problem for determining an optimal 4-class-based dedicated linear storage layout in a class of unit load storage systems. Assuming that space requirement for a class is the sum of the maximum inventory levels of products assigned to the class, and that one-way travel time is a linear function of storage index, we formulate a 4-class-based dedicated linear storage problem PTL[4] and provide an exact splitting algorithm with $O(n{\lceil}logn{\rceil})$. Our algorithms could be applied to more than a 4-class-based dedicated storage layout problem with slight modification in order to reduce computational execution time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.56-65
• /
• 1998

The bonding strength evaluation of the light weight materials for an electrical vehicle has been performed through the T-peel joint test in which the design paramete- rs such as joint style, adherend type, adherend thickness, adhesive thickness, and adhesive type are considered. It is experimentally observed that the peel strength of joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the peel strength of joint increases a little. Aluminum-FRP adherend combination shows such higher peel strength than that of Aluminum-Aluminum adherend combination. For the adhesive bonded joint, the results of FEM analysis agree with those of experiment. The adhesive bonded joint reinfored with a rivet gives higher peel strength than that of the joint without rivet.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.222-229
• /
• 2003

In this paper, we address a layout design problem, PTN[2], for determining an appropriate 2-class-based dedicated storage layout in a class of unit load storage systems. Our strong conjecture is that PTNI2] is NP-hard. Restricting PTN[2], we provide three solvable cases of PTN[2] in which an optimal solution to the solvable cases is one of the partitions based on the PAI(product activity index)-nonincreasing ordering. However, we show with a counterexample that a solution based on the PAI-non increasing ordering does not always give an optimal solution to PTN[2]. Utilizing the derived properties, we construct an effective heuristic algorithm for solving PTN[2] based on a PAI-non increasing ordering with performance ratio bound. Our algorithm with O($n^2$) is effective in the sense that it guarantees a better class-based storage layout than a randomized storage layout in terms of the expected single command travel time.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.949-951
• /
• 2003

To improve the reusability and interoperability of GIS components, we propose the registration/retrieval agents, which can search the locating of users' frequently used components in not only the GIS domain but also other spatial information technologies such as GPS, ITS, RS and FM. The registration/retrieval agents increase the reusability through the GIS component based development under distributed GIS components environment and enables the rapid setting of application on the web. Moreover, users can understand easily the information of GIS component and have the effective investment, timeliness and reliability while they have less maintenance effort by agent. In order to design and implement this system on web, HTML and ASP (Active Serve Page), and JAVA were used. In addition, the performance of this system was verified through comparing others, which are similar to.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.91-96
• /
• 2005

The National Marine Electronics Association(NMEA) is nonprofit-making cooperation composed with manufacturers, distributors, wholesalers and educational institutions. We use the basic port of equipment in order to process the signal from NMEA signal using equipment. When we don't have enough one, we use the multi-port for processing. However, we need to have module development simulation which could multiplex and provide NMEA related signal that we could solve the problems in multi-port application and exclusive equipment generation for a number of signal. For now, we don't have any case or product using NMEA multiplexer so that we import expensive foreign equipment or embody NMEA signal transmission program like software, using multi-port. These have problems since we have to pay lots ci money and build separate processing part for every application programs. Besides, every equipment generating NMEA signal are from different manufactures and have different platform so that it could cause double waste and loss of recourse. For making up for it, I suggest the NMEA multiplexer embodiment, which could independently move by reliable process and high performance single hardware module, improve the memory efficiency of module by designing the optimized Queue, and keep having reliability for realtime communication among the equipment such as main input sensor equipment Gyrocompass, Echo-sound, and GPS.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.739-742
• /
• 2019

In this paper, we propose enhanced DAP(Dose Area Product). The development of enhanced DAP proposed in this paper has optimized the area dose meter that was developed previously. The development of enhanced DAP performed Optimized design of charge integrator and ADC circuit, optimization of line transceiver for RS-485 communication, optimization of display circuit, and optimization of PC-based control program for interlocking and aging. As a result of evaluating the performance of the proposed system in an accredited testing laboratory, Radiation dose dependence and Radiation quality dependence were measured to be 4.2%, which is below ${\pm}15%$ of international standard. Energy range/Tube voltage was confirmed in the range of 30~150kV. The sensitivity difference between sensor field and sensor field area dose sensitivity was measured to be 4.3%, and it was confirmed that it operates normally under ${\pm}15%$ of international standard. In order to measure the reproducibility of the area dosimeter, it was confirmed that it was 0% and it was operated normally at less than 2% of IEC60580 recommendation. Digital resolution was confirmed to be a minimum unit of $0.01{\mu}Gy{\cdot}m^2$ within the error range for the reference dose per hour.

• KCID journal
• /
• v.18 no.2
• /
• pp.111-121
• /
• 2011

This study is to estimate the possible damage area of greenhouse by heavy snowfall event using terra MODIS snow cover area (SCA) and the ground measured snowfall data (GMSD). For the 4 heavy snowfall events of January 2001, March 2004, December 2005 and January 2010, the areas exceeding the design criteria of snowfall depth for greenhouse breaking were extracted by coupling the MODIS SCA and GMSD. The main damaged regions were estimated as Gangwon province in 2001, Chungbuk and part of Gyeongbuk province in 2004, Jeonbuk and Jeonnam province in 2005, and Gangwon and part of Gyeonggi province in 2010 respectively. Comparing with the investigated number of greenhouse damaged data, the estimated areas reflected the statistical data except 2001. The 2001 greenhouse damages were caused by the high wind speed (35.7m/sec) together with snowfall. The results of this study can be improved if the design criteria of wind speed is added.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.95-98
• /
• 2002

This paper presents a study on DSP(TMS320F240) controller design for multi-axes transportation system using BLDC servo motor. This BLDC servo motor controller was realized with DSP(Digital Signal Processor) and IPM (Intelligent Power Module). The multi-axes transportation system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector modulation technique. As CPU of controller DSP(TMS320F240) is adopted because, it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI(Serial Peripheral Interface) port and input/output port etc. The controller of multi-axes transportation system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downword command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC servo motor using DSP and IPM Between host system and middle digital signal processor communicate with RS-422, between main processor and controller communicate with SPI port.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.339-349
• /
• 1999

The punose of this paper is to introduce the comprehensive CAM system (called PosCAM) supporting various function requested from shop floor operators. PosCAM is comported of two subsystems (PosCAM I and PosCAM II) which are designed to make up for the contemporary CAD/CAM systems. PosCAM I is mainly for : a) verifying the part programs written in both custom macros and standard G-codes, b) enhancing machining productivity and quality with built-in cutting conditions and feedrate optimization algorithm. PosCAM II is for : a) efficiently managing the numerous part programs and tool data stored in CNC memory, and b) integratively controlling and monitoring various CNCs from the control center through RS-422 with DNC 2 protocol. The developed systems have been tested via various experiments, and can be Applied for the industrial CNC machine shop as a means for enhancing productivity. The PosCAM system has been implemented and successfully used in the Machine Shop Department of PosCAM since march 1998.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1536-1547
• /
• 1994

This paper presented the implementation and design of narrowband wireless MODEM for packet transmission. The MODEM consists of transmitter, receiver, and the control unit. The BPSK modulation with narrowband filtering is used. The receiver consists of functional modules such as carrier recovery, bit synchronization, lock detector, etc. We evaluated the performance of packet transmission with three MODEM sets implemented in distributed packet radio network. We confirmed the transmission of packetized data through RS232C port of PC. Also, we presented results of experimental data by using measuring instruments. The implemented MODEM in this paper is expected to be useful for the design of wireless LAN system.