• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.129-132
• /
• 2022

In this paper, a technique for optimizing the sub-array system structure that can minimize the side lobe level of the phased-array antenna is proposed. Optimization of the proposed array antenna structure is to adjust the spacing between sub-arrays and sub-arrays by using a hexagonal array structure of one sub-array and a hexagonal sub-array for six hexagonal arrays, and thus the entire phased array antenna system of the radiation pattern was optimized. Compared to the 2-dimensional planar antenna system, the proposed technique maintains a gain of 24.3 dBi and a half-power beam-width of 8.46 degrees without change, and only reduces -3.4 dB and -6.5 dB in the x-axis and y-axis directions, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2018

In this study, a new design method is developed to optimize the structure of an underwater sparse array sensor. The purpose of this research is to design the structure of a sparse array that has the performance equivalent to a fully sampled array. The directional factor of a sparse planar array is derived as a function of the structural parameters of the array. With the derived equation, the structure of the sparse array sensor is designed to have the performance equivalent to that of the fully array sensor through structural optimization of the number and location of transmitting and receiving elements in the array. The designed sparse array sensor shows beam patterns very close to those of the fully array sensor in terms of PSLL (Peak Side Lobe Level) and MLBW (Main Lobe Beam Width), which confirms the effectiveness of the present optimal design method. Further, the validity of the analytic beam patterns is verified by comparing them with those from the FEA (Finite Element Analysis) of the optimized sparse array structure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.643-650
• /
• 2020

The phased array antenna has an advantage enabling rapid beam aim without the mechanical rotation of the antenna, because it arranges multiple elements in a linear or planer (grid or circular) and electronically controls the phase for each element. The planar array antenna is generally used a grid array and a circular array, and the circular form has the higher resolution comparing to the grid form due to the its structural characteristics. However, a concentric circular array (CCA) or a concentric ring array (CRA) with multiple circular arrays which each has different radius is used in the limited area, because the entire radius should be increased for the circular array with a number of elements. In this paper, we introduce the angle-of-arrival (AOA) estimator for an adaptive beamforming satellite system based on CRA and provide the simulation results for performance evaluation. In addition, simulation results are compared and analyzed to the case for the circular array antenna.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.200-211
• /
• 2016

To support cross potential array and direct potential array, the array for leakage detection of all kinds of water facilities is proposed and it is named as the D-Lux array. The D-Lux array data are arranged to a coloured matrix and it is called the D-Lux view. Low potential difference of anomalous zone shown in D-Lux view implies the indication of leakage zone. Furthermore, for an intuitive interpretation of D-Lux array, equipotential distribution map is made by using D-Lux and direct potential array data. Equipotential distribution map makes us possible to predict import point, export point and the path of water leakage that we could have not anticipated in D-Lux view and the graphs. The water tank experiment and numerical analysis were carried out as preparatory experiment and the field explorations were conducted at a concrete weir and a fill dam. As a result, effective and specific detection of leakage path was possible for the concrete weir and the fill dam.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.141-147
• /
• 2019

In this paper, a beam pattern performance analysis was performed according to number of array elements and spacing of the phase array antenna. The distance between array elements in an array structure design was reduced due to the electrical length of Ka-band, which increases the number of array elements in applying the aperture. If the number of elements reduce by widening the array distance, the grating lobes of the same size as the main beam will occur in visible region. If the number of array elements should be applied to a system where the number of array elements should be minimized, the analysis was performed on a plan to reduce the number of array elements and minimize degradation of performance, such as beam width and side lobe level.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.90-97
• /
• 2017

In this paper, we propose a new array antenna scheme which has an improved side lobe level (SLL) as well as a simplified feeding network and a high gain. The proposed array scheme is based on a non-uniformly excited sub-array. For analysis, we use an array factor of sub-array antenna. In the simulation results, the simulated SLL and gain provide more than 18.43 dB and 26.63 dBi, respectively. For the verification of the proposed design scheme, the prototype antenna with $16{\times}8$ radiating elements was designed by the proposed array scheme. The measured SLL and gain are more than 19.85 dB and 25.53 dBi, respectively. This measurement result indicates that the proposed array scheme is reasonable.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.301-307
• /
• 2009

Optical sheets with apertures on the opposite side of the substrate are designed and analyzed in order to use them as high efficiency light concentration sheets in LCD edge-lit backlight. Formation of apertures by self-aligning exposure were analyzed for the microlens array sheet, pyramid array sheet, and cone array sheet and the microlens array sheet showed the best performance for the formation of apertures by the self-aligning exposure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1730-1736
• /
• 2015

This paper presents a 16-channel transimpedance amplifier (TIA) array implemented in a standard $0.18-{\mu}m$ CMOS technology for the applications of panoramic scan LADAR (PSL) systems. Since this array is the front-end circuits of the PSL systems to recover three dimensional image for unmanned vehicles, low-noise and high-gain characteristics are necessary. Thus, we propose a voltage-mode inverter TIA (I-TIA) array in this paper, of which measured results demonstrate that each channel of the array achieves $82-dB{\Omega}$ transimpedance gain, 565-MHz bandwidth for 0.5-pF photodiode capacitance, 6.7-pA/sqrt(Hz) noise current spectral density, and 33.8-mW power dissipation from a single 1.8-V supply. The measured eye-diagrams of the array confirm wide and clear eye-openings up to 1.3-Gb/s operations. Also, the optical pulse measurements estimate that the proposed 16-channel TIA array chip can detect signals within 20 meters away from the laser source. The whole chip occupies the area of $5.0{\times}1.1mm^2$ including I/O pads. For comparison, a current-mode 16-channel TIA array is also realized in the same $0.18-{\mu}m$ CMOS technology, which exploits regulated-cascode (RGC) input configuration. Measurements reveal that the I-TIA array achieves superior performance in optical pulse measurements.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.35-40
• /
• 2016

Pulse diagnosis is one of the representative diagnostic methods in Oriental medicine. In this study, a pulse pressure sensor array coated with silicone, which includes 6 piezo-resistive sensors and 1 thermistor, is fabricated for pulse measurement. It is necessary to coat the pulse sensor array with silicone to avoid the fracture or damage of pressure sensors when the sensor is in contact with the skin and a constant pressure is applied. However, the silicone coating on the pulse sensor array can cause signal interference among the sensors in the pulse sensor array. The interference number (IN), a calculation for expressing the degree of interference among channels, is changed according to the silicone thickness on the pulse sensor array. The IN is increased by a thick silicone coating, but the fabrication error, an important index for the mass production of the sensor array, is reduced by the thickness of the silicone coating. We propose that the thickness of the silicone on the pulse sensor array is an important consideration for the performance of the fabricated sensor and manufacturing repeatability.

• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1904-1907
• /
• 2018

We designed a depth-encoding positron emission tomography (PET) detector by using a bottom and side readout method with a cross-arranged scintillator array. To evaluate the characteristics of the novel detector module, we used the DETECT2000 simulation tool to perform the optical photon transport in the crystal array. The detector module consists of an $M(column){\times}N(row)$ cross-arranged crystal array composed of M/3 sub-arrays consisting of $N{\times}3$ crystals. The second column of the sub-array is arranged perpendicular to the first and the third columns. The crystal is optically coupled to the crystals of the other columns; however, the surfaces between the crystals in the same column are treated as reflectors. A $6{\times}5$ crystal array consisting of two sub-arrays was considered for proof of concept. The two multi-pixel photon counter (MPPC) arrays are coupled to the bottom and one side of the crystal array, respectively. The x-y position is determined by the bottom MPPC array, and the side MPPC array gives depth information. All pixels in the x-y plane and the z direction were clearly distinguished.