• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.693-696
• /
• 2001

본 논문에서는 무선 홈네트워킹 시스템으로 대두되고 있는 Wireless LAN(802.11), HomeRF, Bluetooth 성능을 간섭이 고려되지 않는 경우의 실내 무선 환경하에서 시스템의 변조 방식만을 고려하였으며 실내환경에서 발생되는 에러에 대한 제어 기술로 Truncated Type-B Hybrid ARQ를 적용하였다. 무선 홈네트워킹 시스템의 채널 수 및 주파수 대역은 동일하며 실내 무선 환경을 라이시안 페이딩 환경으로 고려하였을 경우, 직직접파 대 반사파 전력비(K)가 6[dB]인 라이시안 페이딩 환경하에서 오율 $10^{-3}$을 기준으로 할 때 2FSK가 DQPSK보다는 E$_{b}$ /N$_{o}$ 가 약 3[dB] 정도 우수하며 오율 $10^{-6}$을 기준으로 비교하여 보면, DPSK 방식이 4FSK 보다 약 E$_{b}$ /N$_{o}$ 가 5[dB] 우수하였다. 또한 K=6인 라이시안 환경하에서 변조 방식만을 고려한 경우보다 성능 개선 기법을 채용한 무선 홈네트워킹 시스템의 E$_{b}$ /N$_{o}$ 가 더 우수함을 알 수 있었다.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.405-412
• /
• 2004

MC-CDMA, a multicarrier (MC) modulation scheme based on code division multiple access (CDMA), is the most likely candidate for the next generation of mobile radio communications. The rate compatible punctured turbo (RCPT) coded hybrid automatic repeat request (HARQ) has been found to give improved throughput performance in a direct sequence (DS) CDMA system. However, the extent to which the RCPT HARQ improves the throughput performance of an MC-CDMA system has not been fully understood. In this paper, we apply the RCPT HARQ to MC-CDMA and evaluate by computer simulations its performance in a frequency selective Rayleigh fading channel. We found that the performance of RCPT HARQ MC-CDMA is almost insensitive to channel characteristics. The performance can be drastically improved with receive diversity combined with space-time transmit diversity. In addition, the comparison of RCPT HARQ MC-CDMA, orthogonal frequency division multiplexing, and DS-CDMA shows that under similar conditions the throughput of MC-CDMA is the best in a frequency selective fading channel.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.183-189
• /
• 2003

In this paper a simulation was done to verify performance of a message transmission protocol which interfaces LDTS(Local Data Transmission System) with EIS(Electronic Interlocking System), After a stage of analyzing link specifications between LDTS and EIS, transmission messages and messaging formats, simulation parameters were extracted, applied to the error control schemes such as ARQ, FEC, HARQ, and therefrom throughputs and various performance indices were analyzed Simulation program was constructed with Matlab and Matlab GUI and then converted into a stand-alone c++ program to be used on any non-Matlab environments.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.510-517
• /
• 2012

This paper analyzes the performance of voice-over-Internet protocol (VoIP) services in terms of the system throughput, the packet delay, and the signaling overhead in a mobile WiMAX system with a hybrid automatic repeat request (HARQ) mechanism. Furthermore, a queueing analytical model is developed with due consideration of adaptive modulation and coding, the signaling overhead, and the retransmissions of erroneous packets. The arrival process is modeled as the sum of the arrival rate at the initial transmission queue and the retransmission queue, respectively. The service rate is calculated by taking the HARQ retransmissions into consideration. This paper also evaluates the performance of VoIP services in a mobile WiMAX system with and without persistent allocation; persistent allocation is a technique used to reduce the signaling overhead for connections with a periodic traffic pattern and a relatively fixed payload. As shown in the simulation results, the HARQ mechanism increases the system throughput as well as the signaling overhead and the packet delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.538-546
• /
• 2010

This paper presents an overview of position-based routing algorithms. We analyze performances of routing algorithms such as Hybrid Opportunistic Forwarding (HOF), Opportunistic multi-hop routing (ExOR), Location based Geocasting and Forwarding (LGF), and Greedy Forwarding in nearest with forward Progress (GFP) routing algorithms to find the best one in terms of packet error rate and throughput efficiency over effects of fading and noise variance in wireless networks. The analyses in closed form expressions are confirmed by the simulation results, which fully agree to analysis results. Additionally, the simulation results indicate significant differences among algorithms when varying the average SNR or the number of relays.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2630-2632
• /
• 2003

본 연구는 철도 선로변에 설치되는 LDTS(Local Data Transmission System)와 EIS(Electronic Interlocking System) 사이의 인터페이스를 위한 정보전송 프로토콜에 대한 성능검증 시뮬레이션을 위한 것으로, LDTS와 EIS사이의 링크사양, 전송 메시지 정보 및 형식, 장치간 전송 프로토콜 기준 등을 분석하여 파라미터들을 추출한 후, 이들을 ARQ, FEC, HARQ 방식들에 적용하여 처리율(Throughput) 및 여러 설계변수들에 대한 시뮬레이션 결과를 비교하였다. 시뮬레이션 프로그램은 Matlab과 Matlab GUI 툴을 이용하여 작성하여 사용자가 손쉽게 시뮬레이션 파라미터들을 조정할 수 있도록 하였고, Matlab 프로그램 완성후에는 이를 Stand-alone C++ 프로그램으로 코드변환하여 Matlab이 설치되지 않은 컴퓨터에서도 프로그램 사용이 가능하도록 하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.3-9
• /
• 2015

The wireless communication system adopts an appropriate retransmission scheme on each system protocol layer to improve reliability of data transmission. In each system protocol layer, the retransmission scheme operates in independently other layers and operates based on the parameters without reference to end-to-end performance of wireless communication system. For this reason, it is difficult to design the optimal system parameters that satisfy the QoS requirements for each service class. Thus, the performance analysis of wireless communication system is needed to design the optimal system parameters according to the end-to-end QoS requirements for each service class. In this paper, we derive the mathematical model to formulate the end-to-end performance of wireless communication system. We also evaluate the performance at the MAC and transport layers in terms of average spectral efficiency and average transmission delay. Based on the results of performance evaluations, we design the optimal system parameters according to the QoS requirements of service classes. From the results, the HARQ combined with AMC is appropriate for the delay-sensitive service and the ARQ combined with AMC is appropriate for a service that is insensitive to transmission delay. Also, the TCP can be applied for the delay-insensitive service only.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.13-18
• /
• 2014

Sensor nodes are used for monitoring and collecting the environmental data via wireless sensor network. The wireless sensor network with various sensor nodes draws attention as a key technology in ubiquitous computing. Sensor nodes has very small memory capacity and limited power resource. Thus, it is essential to have energy efficient strategy for the sensor nodes. Since the sensor nodes are operating on the same frequency bands with ISM frequency bands, the interference by the devices operating on the ISM band degrades the quality of communication integrity. In this paper, the convolutional code is proposed instead of ARQ for the error control for the sensor network. The proposed convolutional code was implemented and the BER performance is measured. For the fixed transmitting powers of -19.2 dBm and -25dBm, the BER with various communication distances are measured. The packet loss rate and the retransmission rate are calculated from the measured BER. It is shown that the porposed method obtained about 9~12% and 12-19% reduction in retransmission rate for -19.2 dBm and -25 dBm respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2249-2260
• /
• 2017

IMO (International Maritime Organization) has been providing GMDSS (Global Maritime Distress and Safety System) and mandating to install distress and safety systems according to SOLAS. Digital-HF(High-Frequency) coast station communication system maintains interoperability between ship and coast station and digital data exchange in maritime mobile service by digitizing existing analog base voice communication. In this paper, we analyze ITU-R M. 1798-1 established by ITU for digital HF communications and propose Advanced annex2 and new Annex 5 to improve the problems of the existing Annex 2 and Annex 4. The proposed OFDM protocol basically adopts ARQ (Automatic Retransmission Request) which retransmits when an error occurs in a half-duplex manner between an information transmitting side (ISS) and an information receiving side (IRS) and we propose a digital HF communication system and its operational concept which is more reliable and superior than the existing ITU-R M. 1798 by implementing technical development on implementation and performance improvement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.1-9
• /
• 2006

In this paper, we propose a MIMO-OFDMA (Multi Input Multi Output-Orthogonal Frequency Division Multiple Access) system based on beamforming for performance improvement of downlink real-time traffic transmission in harsh channel conditions with low CIR (Carrier-to-Interference Ratio). In the proposed system, we first consider the M-GTA-SBA (Modified-Grouped Transmit Antenna-Simple Bit Allocation) using effective CSI (Channel State Information) calculation procedure based on spatial resource grouping, which is adequate for the combination of MRT (Maximum Ratio Transmission) in the transmitter and MRC (Maximum Ratio Combining) in the receiver. In addition, to reduce feedback information for the beamforming, we also apply QEGT (Quantized Equal Gain Transmission) based on quantization of amplitudes and phases of beam weights. Furthermore, considering multi-user environments, we propose the P-SRA (Proposed-Simple Resource Allocation) algorithm for fair and efficient resource allocation. Simulation results reveal that the proposed MIMO-OFDMA system achieves significant improvement of spectral efficiency in low CRI region as compared to a typical open-loop MIMO-OFDMA system using pseudo-orthogonal space time block code and H-ARQ IR (Hybrid-Automatic Repeat Request Incremental Redundancy).