• International Journal of Fluid Machinery and Systems
• /
• 제8권2호
• /
• pp.94-101
• /
• 2015

To investigate the influence of blade profiles on cavitation behavior in impeller of centrifugal pump, a centrifugal pump with five different blade profiles impellers are studied numerically. The impellers with five different blade profiles (single arc, double arcs, triple arcs, logarithmic spiral and linear-variable angle spiral) were designed by the in-house hydraulic design code using geometric parameters of IS 150-125-125 centrifugal pump. The experiments of the centrifugal pump have been conducted to verify numerical simulation model. The numerical results show that the blade profile lines has a weak effect on cavitation inception near blade inlet edge position, however it has the key effect on the development of sheet cavitation in impeller, and also influences the distribution of sheet cavitation in impeller channels. A slight changing of blade setting angle will induce significant difference of cavitation in impeller. The sharp changing of impeller blade setting angle causes obvious cavitation region separation near the impeller inlet close to blade suction surface and much more flow loss. The centrifugal pump with blade profile of setting angle gently changing (logarithmic spiral) has the super cavitation performance, which means smaller critical cavitation number and lower vapor cavity volume fraction at the same conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.479-482
• /
• 2008

In order to more closely examine the vacuum arc phenomena, it is necessary to predict the magnetohydrodynamic (MHD) characteristics by the multidisciplinary numerical modeling, which is coupled with the electromagnetic and hydrodynamic fields, simultaneously. In this study, the thermal-fluid characteristics of high current vacuum arcs were calculated by a commercial multiphysics package, ANSYS, in order to obtain Joule heat, Lorentz force and the interactions with flow variables. We assumed the diffused-mode arc within an AMF vacuum interrupter. It was found with four different currents that the temperature distributions on the anode surface are diffused uniformly without concentration in 7kA for both types (cup and coil-type). But the arc plasma transition and an increase of thermal flux density for increasing the applied current have caused the change of temperature distributions on the anode surface. We should need further studies on the two-way coupling method and radiation model for arc plasmas in order to accomplish the advanced analysis method for multiphysics.

• 한국통신학회논문지
• /
• 제17권12호
• /
• pp.1465-1474
• /
• 1992

본 논문은 확장된 지역특징을 이용하여 서로 중첩된 물체를 인식하는 새로운 방법에 대해 기술한다. 먼저 모델물체의 화상으로부터 코너, 아크, 평행선 및 코너-아크로 구성된 지역특징을 추출하고 지식베이스를 구축한다. 물체의 정합을 위해, 입력화상으로 부터 지역특징을 추출한 다음, 지식베이스의 특징과의 유사성을 조사하여 유사한 특징 set으로부터 기하변환을 구한다. 기하변환이 클러스터를 형성하면, 그 클러스터의 중심으로 가설을 설정하고 역기하변환으로 정합을 검증한다. 실험을 통해, 제안된 물체인식방법이 기존의 방법에 비해 인식율과 정확도를 높인다는 것을 확인하였다.

• 한국측량학회지
• /
• 제35권1호
• /
• pp.55-62
• /
• 2017

The SRP (Solar Radiation Pressure) model has always been an issue in the dynamic GPS (Global Positioning System) orbit determination. The widely used CODE (Center for Orbit Determination in Europe) model and its variants have nine parameters to estimate the solar radiation pressure from the Sun and to absorb the remaining forces. However, these parameters show a very high correlation with each other and, therefore, only several of them are estimated at most of the IGS (International GNSS Service) analysis centers. In this study, we attempted to numerically verify the correlation between the parameters. For this purpose, a bi-directional, multi-step numerical integrator was developed. The correlation between the SRP parameters was analyzed in terms of post-fit residuals of the orbit. The integrated orbit was fitted to the IGS final orbit as external observations. On top of the parametric analysis of the SRP parameters, we also verified the capabilities of orbit prediction at later time epochs. As a secondary criterion for orbit quality, the positional discontinuity of the daily arcs was also analyzed. The resulting post-fit RMSE (Root-Mean-Squared Error) shows a level of 4.8 mm on average and there is no significant difference between block types. Since the once-per-revolution parameters in the Y-axis are highly correlated with those in the B-axis, the periodic terms in the D- and Y-axis are constrained to zero in order to resolve the correlations. The 6-hr predicted orbit based on the previous day yields about 3 cm or less compared to the IGS final orbit for a week, and reaches up to 6 cm for 24 hours (except for one day). The mean positional discontinuity at the boundary of two 1-day arcs is on the level of 1.4 cm for all non-eclipsing satellites. The developed orbit integrator shows a high performance in statistics of RMSE and positional discontinuity, as well as the separations of the dynamic parameters. In further research, additional verification of the reference frame for the estimated orbit using SLR is necessary to confirm the consistency of the orbit frames.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.9-15
• /
• 2010

In this study, we calculated arc discharges and flow characteristics driven by arcs in a thermal puffer chamber, which is one of most outstanding high-voltage interrupters, for understanding the complex physics and the probability of thermal breakdown. The four main parts of arc model for this virtual-reality are radiation, PTFE ablation, Cu evaporation, and turbulence. Among these important parts the turbulence model can be critical to the reliability of computation results during the whole arcing history because the plasma flow is affected by high heat energy and mass momentum. Two turbulence models, the Prandtl's mixing length model and the standard $k-\varepsilon$ model, are applied for these calculations and are compared with pressure-rise inside chamber and arc voltage between the contacts as well as flow characteristics near current zero.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.99-105
• /
• 2011

The magnetic circuit analysis excluding flux loss and fringing effect often gives a result with unignorable error, when compared with real system. But, it is not easy to make a complete magnetic circuit model with the loss effects. This paper introduces a relatively simple method to build the model including the flux loss and fringing effect, in which the paths of leaked flux are simplified in terms of circular arcs and straight lines. After modification of the model, the error of about 36 % in maximum between the magnetic circuit analysis and FEM analysis is reduced to about 7 %.

• 스마트미디어저널
• /
• 제13권4호
• /
• pp.104-113
• /
• 2024

This study is a model study on the contents and methods of intercultural learning. Starting with a discussion of the intercultural learning model construct, it presents key contents important for intercultural learning and learning methods that can increase the effectiveness of intercultural learning. Also, we actually conducted the above learning program at the learning site and discussed the observations and results. It was a case study that allowed us to test the effectiveness of cultural intelligence theory, the latest theory that can improve intercultural competency. In addition, in order for the cultural intelligence theory to be effective in the learning process, it was found that the PBL method, which allows learners to solve problems on their own, rather than cramming education, is useful. Additionally, it was found that the ARCS model was also very effective in motivating and maintaining learners' continuous motivation. At this time, the instructor was also able to see that the effect increases when the role of catalyst becomes the main one.

• 디지털산업정보학회논문지
• /
• 제17권3호
• /
• pp.63-83
• /
• 2021

The appearance of education is also rapidly changing in social changes represented by social networks. And the development of information and communication technology is also having a widespread effect on the education field. In the era of untact caused by Covid-19, education through smart learning is having a greater effect on students as well as adult learners more quickly and broadly. In addition, smart learning is not just limited to learning content, but is developing into personalized, convergence, and intelligent. The purpose of this study is to identify the factors of ARCS motivation theory that can determine the learning motivation of smart learning users, and to empirically study the casual relationship between these factors on education achievement through practical value and hedonic value. Specifically, I would like to examine how the independent variables ARCS motivation factors (attention, relevance, confidence, and satisfaction) affect learners' education achievement through the parameters of practical value and hedonic value. To this end, a research model was presented that applied the main variables of attention, relevance, confidence, and satisfaction, which are four elements of ARCS motivation theory, a specific and systematic motivational strategy to induce and maintain learners' motivation. In order to empirically verify the research model of this study, a survey was carried out on learners with experience using smart learning. As a result of the study, first attention was found to have a positive effect on the hedonic value. Second, relevance was found to have a positive effect on the hedonic value. Third, it was found that confidence did not have a positive effect on the practical value and the hedonic value. Forth, satisfaction was found to have a positive effect on the practical value and the hedonic value. Fifth, practical value was found to have a positive effect on the education achievement. Sixth, hedonic value was found to have a positive effect on the education achievement. Through this, it can be seen that the intrinsic motivation of learners using smart learning affects the education achievement of users through intrinsic and extrinsic value. A variety of smart learning that combines advanced IT technologies such as AI and big data can contribute to improving learners' education achievement more effectively and efficiently. Furthermore, it can contribute a lot to social development.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.77-79
• /
• 1996

The model interrupters of $SF_6$ gas electromagnetic contactor whose ratings are 7.2kV, 4.0kA have been designed and manufactured on the basis of theoretical and computational analysis for its development. The eddy current analysis, the magnetic field analysis and the calculation of the rotational force on arcs have been conducted using FLUX2D package. The short circuit current interrupting tests have been conducted for the model interrupters using the simplified synthetic testing facility in KERI. The results show that the model interrupters have sufficient interrupting capability and the new design concept is prefer for good interrupting performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.670-674
• /
• 1996

In automated search of a design database to support mechanical design, it is necessaryto recognize a shape pattern which represents a design object. This paper introduces the concept of a surface relation graph (SRG) for recognizing shape patterns from a 3D boundary representation scheme of a solid model(a B-rep model). In SRG, the nodes and arcs correspond to the faces and edges shared by two adjacent faces, respectively. An attribute assigned to an arc is given by an integer which discriminates the relationship between two adjacent faces. The + sign of the integer represents the geometric convexity of the solid, and the -sign the concivity at the shared edge. The input shape is recognized by comparison with the predefined features which are subgraphs of the SRG. A hierarchyof the database for upporting the design is presented. A search for the design database is also discussed. The usefulness of this method is illustrated by some application results.