• 제목/요약/키워드: AP1000

검색결과 50건 처리시간 0.029초

PCCS Analysis Model for the Passively Cooled Steel Containment

  • Hwang, Y.D.;Chung, B.D.;Cho, B.H.;Chang, M.H.;Jeong, Ik
    • Nuclear Engineering and Technology
    • /
    • 제30권1호
    • /
    • pp.26-39
    • /
    • 1998
  • The containment pressure and temperature transient analysis computer code CONTEMPT4/MOD5 is modified to incorporate the passive containment cooling models. The correlations are selected from the existing experimental heat transfer correlations to model the natural and mixed convection in annular space between the containment shell and the shield building. The evaporative heat transfer of the water film on the outer shell of the containment is modeled using the correlations derived from the analogy between the heat and mass transfer. The modified code is applied to the Ap600 containment transient analysis for the model verification and the results are compared to the results of GOTHIC calculation done by Westinghouse. Also, d series of parametric sensitivity studies of heat transfer correlations, water film ratio and delay time of the wet cooling on the containment peak pressure and temperature following LOCA are performed for the containment of 1000MWe passive plant, KP1000.

  • PDF

대용량 피동형원자로의 안전계통 성능 분석

  • 김성오;황영동;정병렬;최철진;정법동;장문희
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 춘계학술발표회논문집(2)
    • /
    • pp.423-428
    • /
    • 1996
  • 피동형원자로 AP600을 참조발전소로하여 설정된 1000MWe급 대용량 피동형원자로의 계통개념에 대한 안전계통 성능 평가 및 코드의 적용성 평가를 목적으로 RELAP5/MOD3코드를 사용하여 대형냉각재상실사고를 모의 해석하였다. 피동형 안전계통으로 축압기, CMT IRWST를 모델하였으며 가압기에 연결된 1단계부터 3단계까지의 자동감압밸브계통을 모델링 하고 4단계 자동감압밸브계통은 각 루프의 고온관에 연결되어 있는 것으로 모델링 하였다. 피동형 안전계통의 모델이 향상된 RELAP5/MOD3.2와 그 이전의 코드인 RELAP5/MOD3.1의 냉각재상실사고 모의계산결과 원자로내의 압력변화, 노심냉각수 주입유량 및 핵연료 피복재 온도 거동이 거의 유사하게 나타났으며 1000MWe급 대용량 피동형원자로의 안전계통은 냉각재 상실사고시 충분한 노심냉각능력을 가지는 것으로 분석되었다.

  • PDF

Investigation of Burst Pressures in PWR Primary Pressure Boundary Components

  • Namgung, Ihn;Giang, Nguyen Hoang
    • Nuclear Engineering and Technology
    • /
    • 제48권1호
    • /
    • pp.236-245
    • /
    • 2016
  • In a reactor coolant system of a nuclear power plant (NPP), an overpressure protection system keeps pressure in the loop within 110% of design pressure. However if the system does not work properly, pressure in the loop could elevate hugely in a short time. It would be seriously disastrous if a weak point in the pressure boundary component bursts and releases radioactive material within the containment; and it may lead to a leak outside the containment. In this study, a gross deformation that leads to a burst of pressure boundary components was investigated. Major components in the primary pressure boundary that is structurally important were selected based on structural mechanics, then, they were used to study the burst pressure of components by finite element method (FEM) analysis and by number of closed forms of theoretical relations. The burst pressure was also used as a metric of design optimization. It revealed which component was the weakest and which component had the highest margin to bursting failure. This information is valuable in severe accident progression prediction. The burst pressures of APR-1400, AP1000 and VVER-1000 reactor coolant systems were evaluated and compared to give relative margins of safety.

무노즐 부스터 적용을 위한 HTPB/AP/Zr계 고체 추진제의 연소속도 증진 연구 (Study on the Burning Rate Enhancement of HTPB/AP/Zr Solid Propellants for Nozzleless Boosters)

  • 이선영;류태하;홍명표;이형진
    • 한국추진공학회지
    • /
    • 제21권2호
    • /
    • pp.18-25
    • /
    • 2017
  • 무노즐 부스터에 사용하는 추진제의 연소특성에 관한 연구를 수행하였다. 밀도비추력을 향상키기기 위하여 고체 추진제의 조성에 Al와 Zr의 금속연료들이 도입되었으며 무노즐 부스터를 설계하기 위하여 낮은 압력지수 및 고 연소속도가 추진제의 주요 연소특성으로 연구되었다. Zr을 함유하는 추진제는 Al을 함유하는 추진제보다 높은 연소속도를 보였으며, $13{\mu}m$ Zr을 함유하는 추진제는 연소속도는 35 mm/s (at 1000 psi)와 압력지수 0.3282를 보였다. 이러한 결과로부터, 무노즐 부스터에서 Al와 Zr을 함유하는 추진제를 사용하는 이점을 보였다.

Rigidfix 와 Infrafix 로 고정한 슬괵건을 이용한 전방 십자인대 재건술 후 경골터널의 확장

  • 최남홍;정유훈
    • 대한관절경학회:학술대회논문집
    • /
    • 대한관절경학회 제21차 추계 학술대회
    • /
    • pp.153-153
    • /
    • 2009
  • The purpose of this study was to evaluate tibial tunnel widening prospectively after anterior cruciate ligament (ACL) reconstruction with hamstring tendon grafts using Rigidfix (DePuy Mitek, Raynham, MA) femoral fixation and Intrafix (DePuy Mitek) tibial fixation. 56 consecutive patients who underwent ACL reconstruction with a minimum of 2 years' postoperative evaluation were reviewed. On the anterior-posterior (AP) and lateral radiographs, the diameter of the tibial tunnel was measured at proximal, middle, and distal positions and the shape of the tibial tunnels were classified. Tunnel widening was defined as widening of greater than 2 mm. Group I was defined as cases with no tunnel widening and group II defined as cases with tunnel widening. Postoperative laxity evaluations were performed using Lachman test, pivot-shift test, and Instrumented laxity testing using the KT-1000 arthrometer. On the AP radiographs, the average diameter of the tibial tunnel increased 8.8% at 6 months and 8.5% at 12 months postoperatively compared to the immediate postoperative day. On the lateral radiographs, the average diameter of the tibial tunnel increased 7.2% at 6 months and 8.1% at 12 months year postoperatively compared to the immediate postoperative day. The tunnel shape evaluation revealed predominantly linear type in 53 patients (95%). Group I was 42 patients (75%) and group II was 14 (25%). The average KT-1000 measurement was 1.0~1.8 mm in group I and 2.1~2.8 mm in group II (p>0.05) The Lachman and pivot-shift showed tests no significant differences between the two groups. In conclusion, hamstring ACL reconstruction using Rigidfix and Intrafix fixation showed less widening of the tibial tunnels than observed in previously published studies.

  • PDF

기체발생기용 복합고체추진제의 조성 및 성능특성 연구 (A Formulation and Performance Characteristics of Composite Solid Propellant for an Application to Gas Generators)

  • 김정수;박정
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 제33회 추계학술대회논문집
    • /
    • pp.181-184
    • /
    • 2009
  • 로켓시스템의 에너지원으로 적용할 수 있는 기체발생기용 복합 고체추진제의 개발과정을 기술한다. 80%의 고체입자 부하율과 양호한 유동성, 그리고 $-50^{\circ}C{\sim}70^{\circ}C$에서 경화에 적절한 추진제 물성을 갖는 HTPB를 바인더로 하여, 낮은 화염온도, 적은 고체입자 잔사, 무독성 생성물의 추진제 제조가 가능한 AN을 제1종 산화제로, 탄도특성 제어에 필요한 AP를 제2종 산화제로 추진제 주요 조성이 구성된다. 기본조성을 근거로 하여 일련의 물성개선 시험이 수행되었으며 최대응력 8 bar 및 최대응력점 변형율 30%, 그리고 탄성계수 1000 psi 수준의 물성을 갖는 추진제 조성을 얻을 수 있었다.

  • PDF

Magnesium 결핍이 항산화효소의 활성유도에 미치는 영향 (Effects of Magnesium Deficiency on Induction of Activity of Antioxidative Enzymes)

  • 김병철;이증주
    • 한국잡초학회지
    • /
    • 제17권4호
    • /
    • pp.431-438
    • /
    • 1997
  • 유해(有害)한 활성산소종(活性酸素種)들을 생성하는 환경 stress에 대한 식물의 적응과정(適應過程)을 파악하기 위한 일환으로서, 호박을 식물재료로 공시하고 Mg이 결핍(缺乏)된 영양액(營養液)에서 재배하여 산화적(酸化的) stress 조건을 부여하였을 때, 나타나는 과산화(過酸化)의 피해정도와 항산화효소(抗酸化酵素)들의 활성변동(活性變動)을 조사하였다. 충분한 양의 Mg이 공급된 영양액에서 재배된 호박의 잎에서는 Mg, 엽록소(葉綠素), 단백질(蛋白質) 함량(含量) 및 항산화효소(抗酸化酵素)들의 활성(活性)이 다소 증가 되었거나 거의 일정하게 유지되었다. 그러나 Mg이 결핍(缺乏)된 영양액(營養液)에서 재배된 호박의 잎에서는 Mg, 엽록소(葉綠素), 단백질(蛋白質) 함량(含量)은 현저히 감소된 반면, 항산화효소(抗酸化酵素)인 AP, GR 및 SOD의 활성(活性)이 크게 증가되었다. 본 연구에서 얻어진 결과들은 식물에서 Mg의 결핍(缺乏)으로 이하여 해로운 활성산소종(活性酸素種)이 생성되며 동시에 이들 활성산소종(活性酸素種)의 유해(有害)한 작용을 소거(消去)하기 위한 항산화효소(抗酸化酵素)의 활성(活性)도 유도(誘導)되는 것을 시사한다.

  • PDF

기획특집 - 전기에너지산업 현장(現場)을 가다 - 두산중공업(주)

  • 대한전기협회
    • 전기저널
    • /
    • 통권410호
    • /
    • pp.48-53
    • /
    • 2011
  • 발전 및 플랜트 분야의 '청정 산소탱크' 두산중공업. 명장(明匠)은 명품(名品)을 낳고, 이렇게 만들어진 두중의 명품은 지구와 인류의 가치를 드높이고 있다. 발전과 Water사업 분야의 다양한 명품들을 제작해 내고 있는 두중 창원공장. 최첨단 친환경 고효율 발전기술을 보유한 두중은 국내에서 가동 중인 20기의 원전 중 16기에 주기기 공급, HRGS(배열회수보일러) 세계시장 점유율 1위, 자타공인 해수담수화 분야 세계 넘버 원 기업이다. 또한 지난 20년간 세계에서 가장 많은 원전 주기기 공급뿐만 아니라 중국 최초의 3G 원전인 산먼, 하이양 원전 수주, 미국에서 발주된 6기의 AP1000 주기기 전량을 수주하는 기록을 달성하기도 했다. 여기에 더해 최근 두산중공업은 풍력발전 등 신재생에너지 분야와 CCS 등 친환경발전 분야의 기술 상용화부문에서도 가속도를 내고 있다. 일관성과 원칙을 중시하는 박지원 사장의 진두지휘 하에 '경쟁우위의 지속'을 지향하는 두중의 글로벌 가치제고 노력은 여전히 현재 진행형이고, 미래지향적이다.

  • PDF

금속선을 삽입한 고체 추진제의 연소 특성

  • 유지창;박영규;김인철;임유진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 1996년도 제6회 학술강연회논문집
    • /
    • pp.131-137
    • /
    • 1996
  • HTPB/AP/Al이 주성분인 2종의 혼합형 추진제를 대상으로 4종의 금속선(Ag, Cu, Al, Ni-Cr)윰 각각 삽입하여 금속선의 직경(0.1~0.8mm)과 연소 압력에 따른 금속선에 인접한 고체 추진제의 연소 속도 증가비($r_w$/$r_sb$)와 압력 지수(n)의 변화를 고찰하였다. 금속선을 추진제에 삽입함으로써 추진제의 $r_w$/$r_sb$ 는 크게 중가하였고, 1000 psia의 압력에서의 최대 6.59배 증가하였다. 그러나 녹는 점이 비교적 낮은 Al 선이나 Ag선은 금속선 직경이 작아짐에 따라 한계 직경에서 $r_w$가 급격히 감소하는 최대값이 존재하였다. 자연 발화 온도와 금속선으로 전달되는 열원인 연소 기체 불꽃 온도로 구성된 무차원군을 Buckingham pi 정리에 의해 구해진 $r_w$/$r_sb$ 에 대한 기존의 무차원 실험식에 추가로 적용하여 계산해 본 결과, 자연 발화 온도는 고려하지 않고 금속선의 녹는 점과 연소 기체의 불꽃 온도를 무시한 Hsing 의 실험식에 의해 계산된 결과보다 표준 편차가 45%이상 줄어듬을 알 수 있었다.

  • PDF

The detection and diagnosis model for small scale MSLB accident

  • Wang, Meng;Chen, Wenzhen
    • Nuclear Engineering and Technology
    • /
    • 제53권10호
    • /
    • pp.3256-3263
    • /
    • 2021
  • The main steam line break accident is an essential initiating event of the pressurized water reactor. In present work, the fuzzy set theory and the signal-based fault detection method has been used to detect the occurrence and diagnosis of the location and break area for the small scale MSLB. The models are validated by the AP1000 accident simulator based on MAAP5. From the test results it can be seen that the proposed approach has a rapid and proper response on accident detection and location diagnosis. The method proposed to evaluate the break area shows good performances for small scale MSLB with the relative deviation within ±3%.