• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.39-45
• /
• 2013

Basically, in order to apply solid propellant as ignition source to high energy metal particle combustion system, we analyzed combustion characteristics of the HTPB/AP/Al, HTPE/AP/Al propellants by using a strand burner. The propellants were tested in a high-pressure windowed strand burner, which was pressurized up to 300 psia with pure argon gas. Strand burner was visualized with two quartz windows and ignition was accomplished by a 10 W $CO_2$ laser. The burning rate of propellant was measured with high-speed camera method for frame analysis and photodiode method for combustion time analysis. Emission spectrum was measured with spectrometer at 300 nm ~ 800 nm and 1500 nm ~ 5000 nm and then we analyzed species during propellant combustion.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.181-184
• /
• 2009

A development of a composite solid propellant is carried out for an application to gas generators as an energy source of rocket system. With HTPB as a propellant binder which has 80% of particle loading ratio, a favorable rheology, and moderate curing properties at the range of $-50^{\circ}C{\sim}70^{\circ}C$, AN is selected as the first kind of oxidizer having the characteristics of a low flame temperature, minimal particle residual as well as nontoxic products. AP is the second oxidant for ballistic property control. A series of experiments for the improvement of physical properties were conducted and resulted in the propellant formulation having 30% of strain rate at 8 bar of max. stress.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.20-20
• /
• 1999

질산 암모늄(ammonium nitrate, AN)은 고체 추진제의 산화제로 사용하기에는 산소 함유량이나 밀도가 과산화염화 암모늄(ammonium perchlorate, AP)보다 불리하여 로켓 추진기관용으로는 널리 사용되지 않았지만 가스발생기용 추진제의 원료로 소량 사용되어 왔었다. 그러나 근래에 와서 군사 무기에 대한 안전 규정이 강화되면서 화재나 폭발에 대한 위험도를 낮추고, 특히 연소 기체에서 유독성 염화수소의 발생량을 줄이기 위해서는 AP나 RDX, HMX와 같은 산화제를 AN으로 대체 사용하는 연구를 많이 수행하고 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.2
• /
• pp.46-53
• /
• 2005

We have analyzed the temperature and humidity aging test results of a composite solid propellant. The temperature aging test was performed to evaluate the storage life of a propellant, while the humidity aging test could provide the hygroscopicity of Ammonium Perchlorate(AP) exposed to .elative humidity (RH) 10, 30, $50\%$ environment. A specimen was used in the temperature test, and a block of propellant from the actual motor was used in the humidity test. We report that the 4-month storing at 60 degree is equivalent to the 10-year 60 degree condition. The composite solid propellant with HTPB binder showed signs of hardening with time lapse but the effect of humidity up to RH $50\%$ was not noticeable.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.21-27
• /
• 2017

In this paper, in order to control the burning rate and pressure exponent of HTPB/AP/Al based propellant for the improvement of performance, the effect of the size ratio of AP particles and various contents of Butacene as burning catalyst on combustion properties was investigated. In the propellant formulation with both $28{\mu}m$ Al of 23% and Butacene of 3%, the burning rate and pressure exponent were increased with increasing the contents of $9{\mu}m$ AP particles. And the burning rate was increased with increasing the contents of Butacene with showing the relatively low pressure exponent in the propellant containing Butacene. However, the significant variations of pressure exponent by contents of Butacene were not observed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.77-84
• /
• 2006

With the development of micro/nano spacecraft, concepts of micro propulsion are introduced for orbit transfer and drag compensation as well as attitude control. Micro solid propellant thruster has been attention as one of possible solution for micro thruster. In this paper, micro solid propellant thruster is introduced and research on basic components of a micro solid propellant thruster is reported. Micro Pt igniter was fabricated through negative patterning and quantitative effect of geometry was estimated. The characteristic of HTPB/AP solid propellant was investigated to measure the homing velocity. A combustion chamber was fabricated by means of anisotropic etching of photosensitive glass. Finally, micro solid propellant thrusters having various geometries were fabricated and tested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.109-117
• /
• 1996

Strand Burner 내에 설치되는 추진제에 10$\mu\textrm{m}$굵기의 Thermocouple을 설치하여 각 압력하에서의 연소속도 및 연소시의 Thermal Structure의 정보를 얻는 방법과 러시아의I.C.P에서 공동실험을 통하여 얻은 60%의 니트로글리세린과 40%의 니트로셀룰로오스를 혼합한 더블베이스 추진제 및 AP와 에폭시수지를 혼합한 간이 Composite형 추진제의 Thermal Structure를 조사한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.283-287
• /
• 2008

The heat released during the external frictional motion is a factor responsible for initiating energetic materials under all types of mechanical stimuli including impact, drop, or penetration. We model the friction-induced ignition of HMX, RDX and AP/HTPB propellant using the BAM friction apparatus and one-dimensional time-to-explosion apparatus whose results are used to validate the friction ignition mechanism and the deflagration kinetics of energetic materials, respectively. The ignition times for each energetic sample due to friction are presented.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.5
• /
• pp.1-6
• /
• 2009

A development of a composite solid propellant is carried out for an application to gas generators as an energy source of rocket system. With HTPB as a propellant binder which has 80% of particle loading ratio, a favorable rheology, and moderate curing properties at the range of $-50^{\circ}{\sim}70^{\circ}C$, AN is selected as the first kind of oxidizer having the characteristics of a low flame temperature, minimal particle residual as well as nontoxic products. AP is the second oxidant for ballistic property control. A series of experiments for the improvement of physical properties were conducted and resulted in the propellant formulation having 30% of strain rate at 8 bar of max. stress.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.356-359
• /
• 2011

In this study, applicable to Sounding Rocket about the development of high-performance propellant was studied. Sounding Rocket requires generally multistage rocket system for atmospheric research. This study describes the development of two types solid propellant compositions which are based on HTPB/AP for the two-stage rocket. CEA code of NASA and internal ballistic analysis were used for confirming the theoretical performance of designed propellants. The strand burner and JANNAF tensile test was used to measure ballistic and mechanical properties of designed propellants. Finally, static fired test of standard motors was performed to prove the possibility of development.