• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1406-1415
• /
• 2012

Though WiMedia supports the higher data rates than other WPAN technologies, a WiMedia device cannot reach other devices which are apart from it more than 10 meter; the limited transmission range of the WiMedia protocol. In this paper, we propose a multi-hop QoS routing protocol to enable WiMedia devices to transmit real-time data to devices that is located out of transmission range. The proposed routing protocol is a hybrid routing protocol, which is the mixed protocol of table-driven and on-demand routing algorithm. In the proposed protocol, a route for a device within 2-hop is established by using the table-driven routing algorithm and a route for the device beyond 2-hop is established by using the on-demand routing algorithm. We perform ns-2 simulation to investigate the performance of the proposed routing protocol with AODV and DSDV. The simulation results show that the proposed protocol's performance is better than AODV and DSDV in terms of the throughput and delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1371-1379
• /
• 2009

In this paper, we propose a new multi-path routing protocol to provide reliable and stable data transmission in MANET that is composed of high-mobility nodes. The new multi-path routing establishes the main route by the mechanism based on AODV, and then finds the backup route that node-disjoint from the main route by making add nodes in the main route not participate in it. The data transmission starts immediately after finding the main route. And the backup route search process is taking place while data is transmitted to reduce the transmission delay. When either of the main route or the backup route is broken, data is transmitted continuously through the other route and the broken route is recovered to node-disjoint route by the route maintenance process. The result of the simulation based on the Qualnet simulator shows that the backup route exists 62.5% of the time when the main route is broken. And proposed routing protocol improved the packet transmission rate by 2~3% and reduced the end-to-end delay by 10% compared with AODV and AODV-Local Repair.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.213-218
• /
• 2006

In this paper, we evaluate and compare performance between position-based and non-position-based routing protocols in a vehicular ad-hoc network. The protocols evaluated in this paper for many performance evaluation aspects are a position-based routing protocol, GPSR (Greedy Perimeter Stateless Routing), and the non-position-based such as AODV (Ad-hoc On-Demand Distance Vector) and DSR (Dynamic Source Routing) protocols. The three protocol characteristics such as Packet Delivery Ratio, Latency of first packet per connection, and Average number of hops depending on distance are compared and evaluated. As the result of simulation, the AODV performed better than the DSR. However, due to the high mobility characteristic of a vehicular ad-hoc network, GPSR, the position-based routing performs better than the non-position-based routing protocols such as AODV and DSR in a vehicular ad-hoc network environment.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.303-310
• /
• 2008

To increase the lifetime of ad-hoc networks, a ratio of energy consumption for each node should be kept constant by equally distributing network traffic loads into all of the nodes. In this paper, we propose a modified AODV routing protocol to determine a possible route by considering a remaining battery capacity of a node and the degree of its usage. In addition, to reduce the amount of energy consumption during the path rediscovery process due to the huge amount of the AODV control messages the limited number of possible routes are stored into a routing table of a source node. When some links of a route fail, another possible path can be looked up in the table before the route discovery process should be initiated. We have tested our proposed method with a conventional AODV and a MMBCR method which is one of the power-efficient energy routing protocols based on the three performance metrics, i.e., the total remaining battery capacity, network lifetime and the ratio of data packets received by the destination node to compare their performance.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.606-614
• /
• 2006

The conventional on-demand mobile ad hoc routing algorithms (DSR and AODV) initiate route discovery only after a path breaks, incurring a significant cost and time in detecting the disconnection and establishing a new route. In this theory, we investigate adding proposed pro-active route selection and maintenance to the conventional on-demand mobile ad hoc routing algorithms(DSR and AODV). The key idea is to be only considered likely to be a path break when the received packet power becomes close to the minimum critical power and to be generated the forewarning packet when the signal power of a received packet drops below a optimal threshold value. After generated the forewarning packet, the source node can initiate rout discovery in advance; potentially avoiding the disconnection altogether. Our extensive simulation study shows that the proposed advance-active route selection and maintenance algorithms outperforms the conventional on-demand routing protocol based on DSR and AODV in terms of packet delivery ratio, packet latency and overhead.

• Journal of KIISE:Information Networking
• /
• v.33 no.5
• /
• pp.395-406
• /
• 2006

In ad hoc networks, the limited battery capacity of nodes affects a lifetime of network Recently, a large variety of power-aware routing protocols have been proposed to improve an energy efficiency of ad hoc networks. Existing power-aware routing protocols basically consider the residual battery capacity and transmission power of nodes in route discovery process. This paper proposes a new power-aware routing protocol, TDPR(Traffic load & lifetime Deviation based Power-aware Routing protocol), that does not only consider residual battery capacity and transmission power, but also the traffic load of nodes and deviation among the lifetimes of nodes. It helps to extend the entire lifetime of network and to achieve load balancing. Simulations using ns-2[14] show the performance of the proposed routing protocol in terms of the load balancing of the entire network, the consumed energy capacity of nodes, and an path's reliability TDPR has maximum 72% dead nodes less than AODV[4], and maximum 58% dead nodes less than PSR[9]. And TDPR consumes residual energy capacity maximum 29% less than AODV, maximum 15% less than PSR. Error messages are sent maximum 38% less than PSR, and maximum 41% less than AODV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1306-1312
• /
• 2017

The route request (RREQ) packet is selectively re-broadcasted in the routing protocols that improve the broadcast storm problem of the ad-hoc on-demand routing protocol (AODV). However, in a low node density scenario, the connectivity of these selective rebroadcast schemes becomes less than that of the AODV. In order to clarify the requirements of these selective re-broadcast routing protocols, it is necessary to investigate the relationship between the node density and the connectivity. In this paper, we drive a probability to preserve the connectivity of the GAODV at an intermediate rebroadcast node. In addition, we present an intuitive method to approximate the end-to-end connectivity of the GAODV. We draw the required node density to guarantee the connectivity of 0.9 and 0.99 through computer simulations, and verify the validity of the derived theoritical connectivity by comparing with the simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1665-1671
• /
• 2007

Mobile Ad hoc Networks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad-hoc networks. In this study, we proposed an enhanced routing protocol based on AODV by monitoring variation of receiving signal strength. New metric function that consists of node mobility and hops of path is used for routing decision. From extensive experiments by using NS-2, The performance of the proposed routing scheme has been imp개ved by comparison to AODV protocol.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.169-178
• /
• 2019

Due to the characteristics of an ad hoc network without a control center, self-organization, and flexible topology, the trust evaluation of the nodes in the network is extremely difficult. Based on the analysis of ad hoc networks and the blockchain technology, a blockchain-based node-level trust evaluation model is proposed. The concepts of the node trust degree of the HASH list on the blockchain and the perfect reward and punishment mechanism are adopted to construct the node trust evaluation model of the ad hoc network. According to the needs of different applications the network security level can be dynamically adjusted through changes in the trust threshold. The simulation experiments demonstrate that ad-hoc on-demand distance vector(AODV) Routing protocol based on this model of multicast-AODV(MAODV) routing protocol shows a significant improvement in security compared with the traditional AODV and on-demand multipath distance vector(AOMDV) routing protocols.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.82-83
• /
• 2022

Ad-hoc On-demand Distance Vector (AODV), is one of well-designed routing protocols in mobile ad hoc networks. It supports the functionality of node mobility modules through multiple control messages to create and maintain paths for data transfer. Even though a number of studies have been conducted to achieve rapid discovery of paths across the network, but few have focused on impact of control messages. This paper proposes a method to adjust the transmission time of messages used in path recovery according to their individual characteristics. Simulation results show the improved performance of the proposed algorithm rather than traditional AODV routing protocol.