• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.744-750
• /
• 2009

In this study, the pumping performance of a piezoelectric valveless micropump is simulated. The micropump, which was developed in the previous work, is composed of a four-layer lightweight piezocomposite actuator, a polydimethylsiloxane (PDMS) pump chamber, and two diffusers. The piezoelectric domain, the fluid domain and the structural domain are coupled in the three-dimensional simulation. We used ANSYS for the piezoelectric and structural domains and ANSYS CFX for the fluid domain. The effects of driven frequency on the flow rate have been investigated by simulating the flow characteristics for 10 Hz and 40 Hz driven frequencies. The flow rates with respect to driven frequencies up to 300 Hz have been calculated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.279-286
• /
• 2019

In this study, a numerical investigation is conducted for the shock deceleration prediction of a conical impactor in gas-gun tests. With the development of weapon systems, gas-gun tests are required to validate the survivability and structural reliability of devices under test (DUT) in high-G shock environments, such as those over ten thousand Gs or more. As shock endurance is highly influenced by various bird parameters, such as mass, velocity, and pressure, it is important to determine the appropriate test conditions to generate a high-G shock environment. However, experimental repetitive studies are inefficient to validate test conditions in terms of economic aspects. Therefore, a numerical technique is required to replace experimental gas-gun tests. Here, a numerical investigation is conducted with ANSYS AUTODYN using explicit code. Through this investigation, the dynamic behavior of DUT is presented. In addition, the results of numerical studies are verified through a comparison with the experimental results of a gas-gun test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2015

A gutter is generally a fixed beneath the edge of a roof to carry off rainwater, or a narrow trough that collects rainwater from the roof of a building to diverts it from the structure, typically into a drain. Reasonable designs reduce the mass of the gutters (~ 16.9%), make it faster and easier to assemble, and gives it consistent strength and integrity (about 10%). New gutter systems are presented according to the results of structural analyses performed by ANSYS and ADAMS/Durability Hot Spots. In addition, the CATIA program can improve the precision of the 3D system simulations. The design of a gutter system installations also needs to comply with the specific rainfall intensities and adequate overflow provisions needs to be provided to prevent water from sides of the roofs during heavy rainfall periods. The principle outcome of this work is a computational design tool that can be used to improve the gutter performance considering a variety of factors (gutter geometry, drainage and rainfall intensity). A good gutter design must satisfy many criteria, including durability, low cost, and ease of repair and cleaning.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.178-183
• /
• 2010

Base-mounted type(BMT) driving assembly in CNC machine tools is an indispensable part to improve productivity by reducing tool changeover time and to meet the ever-increasing demand of precision machine tools. This study aimed to perform finite element analysis and geometric parameter optimization to improve the efficiency of BMT driving assembly. First, simulations for three-dimensional structural and vibration analysis were performed using ANSYS/Workbench on the initial geometric models of BMT driving assembly. After analyzing stress and deformation concentration zones, several new geometrical models were designed and evaluated by design of experiments and ANSYS/DesignXplorer. Through a series of analysis-evaluation-modification cycles, it was seen that designed models were effective in determining optimal geometry of BMT driving assembly.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1986-1988
• /
• 2005

V-형 선형 초음파 모터를 설계하고 유한 요소 해석 소프트웨어인 ANSYS9.0을 사용하여 모터를 해석하고 그 결과를 도출하였다. 이 모터의 기본적인 구조는 압전 세라믹을 V-형 모터 stator 에 부착한 형태이다. 모터의 동작을 위해서 90도 위상차가 있는 2개의 교류전원을 각각 세라믹에 인가하였다. 그러면 각 세라믹은 압전 역효과와 위상의 차이에 의해 모터 arm을 대칭-비대칭 운동을 하게 만든다. 그리고 이 운동이 타원 제적을 발생시킨다 즉 모터와 슬라이드의 접선에서 이 타원궤적 운동의 마찰력으로 모터가 동작하게 된다. 최적의 조건을 찾기 위해 ANSYS를 이용하여 모터의 구조에 여러 가지 변수-고정점, stator의 재질, arm-body에 부착한 세라믹의 위치, 위상차, arm의 결합각 차, arm-body와 세라믹의 크기 변화, arm의 크기 변화-를 주어 선형 초음파 모터 구조의 최적 조건을 찾아 설계를 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1294-1298
• /
• 2014

Comparative analysis study of the flow characteristics and the experiment was done to try to present the orientation of the solenoid structure to be produced in the future. The comparative analysis of the analysis and experimental values was performed using the experiments and ANSYS CFD. 3D modeling of the structure are designed by the CATIA V5R18, meshing process of the flow section was used by ICEM CFD program. Flow rate was indicated by using the experimental values appear in $0-10{\ell}/min$, the result of the flow analysis, was $0.18{\ell}/min$ Max. It was possible to suggest a solenoid structure more efficient through comparative analysis of experimental values and flow analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.17-21
• /
• 2017

Horizontal thin-film thermoelectric cooler has been simulated using a commercial software (ANSYS Workbench Thermal-electric). The thermoelectric cooler consists of thin-film n-type $Bi_2Te_3$, p-type $Sb_2Te_3$ thermoelectric elements, and Au electrode, respectively. The hot spot was placed under the center of device which represents Joule heating. Numerical analysis was conducted by geometric variable, and a maximum temperature difference of $13^{\circ}C$ was obtained. As from the simulation parameters, we presented an optimized design for high efficiency cooling.

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.91-98
• /
• 1993

Minimum weight design of the boom of an excavator with stress and displacement constraints was performed. The procedure of analysis consists of the following steps. The finite element model of the boom was built up by using 227 triangular plate elements each of which has three nodes. And then the finite element program was implemented and its accuracy was verified by comparing its results with those of the commercial structural analysis package-ANSYS 4.4A. For the constraints of stresses and displacements, the design sensitivities of those were computed using direct differentiation method. To verify the reliability of them the results were compared with those of the finite difference method. The optimum design value was obtained by using PLBA(Pshenichny-Lim-Belegundu-Arora)non-linear optimization program which adopts the active set strategy. Using the above results, minimum weight design of an excavator boom showed an effect of 27% reduction in weight.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1507-1514
• /
• 2011

Injection molding is the most commonly used process that uses plastic material. Today, the uses of plastic material are continuously increasing, and the range of application is also being extended by the development of novel materials. An inline skate consists of 4 components: the boot, frame, wheel and brake. Among these components, the frame is the most critical. The injection formability for a variety of injection materials for inline skate frames was studied. We also studied the injection formability of the product for various sizes of the runner and gate. In this study, injection molding analysis was performed using MOLDFLOW, and structural analysis was performed using ANSYS.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.305-306
• /
• 2007

ACP(Advanced Spent Fuel Conditioning Process)의 금속전환로에 $U_3O_8$을 공급하기 위하여 20 kgHM/batch의 $UO_2$ 펠릿(pellets)을 처리할 수 있는 건식분말화 장치가 개발되고있다. 건식분말화 장치는 500 $^{\circ}C$온도에서 공기를 공급하여 일정한 입도범위의 균질한 $U_3O_8$을 만든다. 이런 건식 분말화 장치의 효율을 높이기 위해서는 반웅로에 불어 넣어주는 공기의 유량을 증가시킬 필요가 있다. 하지만 공기와 반응하여 생성되는 $U_3O_8$ 입자는 그 크기가 최소 3 ${\mu}$m 정도로 매우 미세하여，반응로 출구를 통해 외부로 빠져나갈 가능성 이있다. 이를 방지하기 위해 분말화 장치 출구 바깥에는 필터가 설치되어 있으나 공기와 함께 $U_3O_8$ 입자가 계속해서 빠져 나갈 경우 입자로 인해 필터가 막혀 제 기능을 할 수 없게 된다. 따라서 건식 분말화 장치는 미세한 $U_3O_8$ 입자가 반응로 밖으로 빠져나가지 않도록 입구에서의 공기 유량을 일정 수준 이하로 조절해주는 것이 필요하다. 이 연구의 목적은 초기 유량으로부터 유량을 점점 증가시키면서 시간변화에 따른 입자 거동 특성을 해석하며， 결과로부터 주어진 크기의 타원입자에 대해 최대 허용 공기 유량을 결정하고자한다. 이 해석을 위해 유동과 입자를 동시에 해석할 수 있는 ANSYS-CFX 5.7.1과 ANSYS-CFX 10.0 두 가지의 소프트웨어가 사용되었다. 해석 결과를 바탕으로 좀더 정확한 유량 한계치 계산을 위해 추가로 수행되어야 할 해석에 대해 제안하였다.