• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.264-279
• /
• 2005

Statement of problem. Intraoral corrosion not only affects the esthetic and function of metallic dental restoration, but also has biologic consequences as well. Therefore, corrosion is considered a primary factor when choosing the dental alloy and laboratory technique. Purpose. The objective of this study was to compare the effects of solder and laser weld on corrosion Material and methods. Test specimens were made of 2 types of gold alloys, Co-Cr and Ni-Cr alloy and fabricated 3 methods, respectively: as cast, solder, and laser weld. For the analysis of corroding properties, potentiodynamic polarization test and immersion test conducted. The potentiodynamic polarization scan curve were recorded in 0.9% NaCl solution(pH 7) using Potentiostat/Galyanostat Model 273A. All specimens were exposed to 0.9% NaCl solution(pH 2.3) during 14 days. Elemental release into corrosive solution was measured by atomic emission spectrometry Differences in corrosion potential and mass release were determined using ANOVA. Results and conclusion. Through analyses of the data, following results were obtained. 1. In Pontor MPF and Wiron 99, corrosion potential of the solder group was statistically lower than as cast and laser weld group (p<0.05) , but there was no difference between corrosion potential of solder group and laser weld group in Pontor MPF and no differences between as cast and laser weld group (p>0.05). In Jel-Bios 10 and Wirobond, there was no difference of corrosion potential according to joining methods(p>0.05). 2. In all tested alloys, the amount of released metallic ion was greatest in the solder group(p<0.05). There was no difference between as cast group and laser weld group in Jel-Bios 10 and Wirobond(p>0.05). 3. In scanning electron microscopic examination. except soldered Wiron 99 specimens, it is impossible to discriminate the corrosive property of solder and laser weld. 4. Under the this experimental circumstances, laser weld appears superior to the solder when corrosion is considered.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.63-67
• /
• 2009

STATEMENT OF PROBLEM. Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in achieving appropriate bonding strength of tray material and impression material. PURPOSE. This study is to investigate an appropriate drying time of tray adhesives by evaluating tensile bonding strength between two types of polyvinylsiloxane impression materials and resin tray, according to various drying time intervals of tray adhesives, and with different manufacturing company combination of impression material and tray adhesive. MATERIAL AND METHODS. Adhesives used in this study were Silfix (Dentsply Caulk, Milford, Del, USA) and VPS Tray Adhesive (3M ESPE, Seefeld, Germany) and impression materials were Aquasil Ultra (monophase regular set, Dentsply Caulk, Milford, Del, USA) and Imprint II Garant (regular body, 3M ESPE, Seefeld, Germany). They were used combinations from the same manufacture and exchanged combinations of the two. The drying time was designed to air dry, 5 minutes, 10 minutes, 15 minutes, 20 minutes, and 25 minutes. Total 240 of test specimens were prepared by auto-polymerizing tray material(Instant Tray Mix, Lang, Wheeling, Il, USA) with 10 specimens in each group. The specimens were placed in the Universal Testing machine (Instron, model 3366, Instron Corp, University avenue, Nowood, MA, USA) to perform the tensile test (cross head speed 5 mm/min). The statistically efficient drying time was evaluated through ANOVA and Scheffe test. All the tests were performed at 95% confidence level. RESULTS. The results revealed that at least 10 minutes is needed for Silfix-Aquasil, and 15 minutes for VPS Tray Adhesive-Imprint II, to attain an appropriate tensile bonding strength. VPS Tray Adhesive-Imprint II had a superior tensile bonding strength when compared to Silfix-Aquasil over 15 minutes. Silfix-Aquasil had a superior bonding strength to VPS Tray Adhesive-Aquasil, and VPS Tray Adhesive-Imprint II had a superior tensile bonding strength to Silfix-Imprint II at all drying periods. CONCLUSION. Significant increase in tensile bonding strength with Silfix-Aquasil and VPS Tray adhesive-Imprint II combination until 10 and 15 minutes respectively. Tray adhesive-impression material combination from the same company presented higher tensile bonding strength at all drying time intervals than when using tray adhesive-impression material of different manufactures.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.4
• /
• pp.171-194
• /
• 2012

This study focuses on immigrant women who are married to Korean men and who live in a multicultural family situation in Gyeonggi-do. These women experience acculturative stress and marital conflict and this study aims to determine how social support seeks to mediate the effects of those stressors. The women in this study participated in activities and received services from one of Gyeonggi-do Province's civic organizations, religious organizations, or social service organizations, such as the Social Welfare Agency and the Multicultural Family Support Center. In order to verify the study's hypothesis, the researchers used the following statistical analytical methods : t-test, two-way ANOVA and multi-regression analysis. Analysis of the study's results showed that the highest degree of marital conflict was found in the sub-zones and variables that were personal. Those variable were : the difference in mindset and values (personal domain), economic problems (communal living area), a child's upbringing and education issues (third party area), and the participant's sex life (in the marital relationship). The hypothesis was tested using the research model validation and the results are summarized as follows. First, in order to analyze the relationship between the marriage migration females' acculturative stress and the impact of that stress on marriage conflict, the hierarchical regression analysis was used. It identified that a direct correlation existed between acculturative stress and marriage conflict; where a higher degree of acculturative stress was present, a higher degree of marriage conflict was found. Second, the study found a statistical significance in the correlation and relationship (${\beta}$=.208, p<0.05) between the acculturative stress of the marriage migration female and material support. In other words, the material support can be seen as having a moderating effect on the acculturative stress, which is the independent variable, and the marital conflict, which is the dependent variable.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.397-404
• /
• 2009

The purpose of this study was to evaluate the tobacco cessation activities of the dental staffs in Wonju city. All 137 subjects were surveyed by structured questionnaire with convenience sampling. The distribution and correlation of attitude, behavior, and intervention were evaluated by both frequency test and ANOVA test. 75.2% of total subjects responded that the dental staff should give a model through prohibition of smoking and 66.5% responded that tobacco cessation activities should be responsibility of the dental staff. Tobacco cessation counsel was performed by little but with positive attitude. Advice method of tobacco cessation was used to counsel on tobacco cessation (68.6%). The dentists (48.2%) and dental hygienists (23.4%) were responded adequate for the tobacco cessation counselor, however, it was shown that the dentist had lower level of attitude about tobacco cessation than dental hygienist (p<0.01). The dental staff needs to participate in the tobacco cessation counseling program more regularly and actively. In order for the dental staffs gets the counsel effectively and intervene with tobacco cessation, it is essential that the education of tobacco cessation is integrated in dental school. Furthermore, it is necessary for the dental staffs to take continuing education for more effective understanding of tobacco cessation.

• Child Health Nursing Research
• /
• v.21 no.1
• /
• pp.37-45
• /
• 2015

Purpose: In this study, a comparison was done of the extent of health-related quality of life (HRQoL) for preterm and fullterm children during early childhood, and factors affecting HRQoL in the early childhood of premature children were analyzed. Methods: Eighty mothers of children born prematurely and 83 mothers of children born at fullterm listed on two Internet cafes were sampled for this study. The major instrument used for the study was the TNO-AZL Preschool Quality Of Life (TAPQOL) questionnaire. Results: Total score for HRQoL in the premature group was 80.5 (${\pm}9.9$) and for the full term group, 85.0 (${\pm}8.3$), on a 100-point scale. A comparison of the premature group and full term group showed that the domains which scored relatively lower with respect to HRQoL included the stomach, motor function, anxiety, liveliness and communication. Among the factors that have an impact on HRQoL were 'length of stay in neonatal intensive care unit (${\geq}7$ days)' and 'birth weight (<1,000 gm)'. The explanation power of the model was 17%, which was statistically significant. Conclusion: These findings indicate that a differentiated premature infant follow-up program for children who are hospitalized over 7 days in NICU or weighed under 1,000g at birth is urgently needed.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.139-145
• /
• 2017

The aim of this study was to measure the remineralization effect of APF gel and fluride varnish on artificial enamel caries using CLSM in vitro. The samples were divided into 3 groups: control, 1.23% APF gel, 5% NaF varnish. The specimen surfaces were observed by CLSM and measured average fluorescence of the lesion(AFL). The results were analyzed using one-way ANOVA and Pearson's correlation analysis at a significance level off 0.05(PSWA 18.0, SPSS Inc., USA). There were significant differences between AFL at baseline and 1 day after fluoride application(p<0.05) but there are no significant differences between ${\Delta}$ AFL of all groups (p=0.222). Result of Pearson's correlation analysis, there are no significant correlation between VHN and AFL, but there were significant correlation between AFL at baseline and 1 day after fluoride application(r=0.811, p<0.001). Although AFL decreased after fluoride application, but there was no difference between the groups. In the future, it is necessary to test the oral environment model or in situ experiment supplemented the limitations of this study.

• The Korean Journal of Elementary Counseling
• /
• v.9 no.2
• /
• pp.143-162
• /
• 2010

The purpose of this study is to construct Parent Attachment Scale for Children. Adapting the item consisting method used in Experiences in Close Relationships-Revised(ECR-R), Parent Attachment Scale for Children was constructed to measure child's attachment style with their parent, reliably and validly. Also, reliability and item trait informations based on item response theory were reviewed. First preliminary items were derived from the original items of ECR-R and existing Attachment Inventories. These items were modified and complemented to be easier and keep the original meaning of each item. Second preliminary items were administrated to 4~6th grades students(N=576). Finally, Parent Attachment Scale for Children were consisted with 30 items based on two-parameter graded response model. Internal consistency ranges of the scales of Parent Attachment Scale for Children are as follows : Avoidance scale is .94~.96; Anxiety scale is .85~.88. Test-retest reliability ranges are as follows; Avoidance scale is .71~.80; Anxiety scale is .53~.68. Item discrimination and item information value were within an appropriated range. Hierarchical cluster analysis with Ward's Method revealed four types of attachment style : Secure, Dismissing, Preoccupied, Fearful. Other implications and limitations of this study were discussed.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

• Journal of muscle and joint health
• /
• v.2 no.1
• /
• pp.41-72
• /
• 1995

The purpose of this study is to examine the effects of assertiveness training and value clarification training on nurse's conflict and conflict management mode. Fifty seven registered nurses participated in the study ; they were employed by three general hospital located in Daegu, Korea. The study employs two treatment groups. The assertiveness training group consisted of subjects who participated in 90-120 minutes sessions of assertiveness training nine times over five weeks. The other treatment group, was adiministed nine, 90-120 minutes sessions of value clarification during the same period. For the control group, nursing subjects were appointed the training after five weeks. Pre-test evaluation were administered to all subjects in three groups prior to one week of the treatment. Role conflict Inventory-general(RCI-G) and Communication Conflict Inventory-general (CCI-G) measure nurse's conflict management mode. Post-test evaluation were administered to all subjects in three groups two weeks after the last session by Role Conflict Inventory-Specific(RCI-S), Communication Conflict Inventory-Specific (CCI-S), Management Model-Specific(CMMI-S). The analysis of variance(ANOVA) and covariance(ANCOVA) on gain scores were running the SPSS program. In order to test statistical differences among mean scores of the scales obtained after treatment, multiple comparisons were carried out by Turkey method. Conclusions obtained from the results are as follows. 1. The assertiveness training and the value clarification training were effective in decreasing the nurse's role conflict. The value clarification was more effective than the assertiveness training in decreasing the nurse's role conflict. 2. Both assertiveness training and value clarification training were effective in decreasing nurse's communication conflict. There was, however, no differences between assertiveness training and value clarification training in decreasing the nurse's communication conflict. 3. The assertiveness training and the value clarification training were quite effective in compromizing and collaborating conflict management mode, to reducing the withdrawl and accomodate, force and accomodate conflict management mode to conflict. There was no difference in the effectiveness of assertiveness training and value clarification. In assessing the effects of the treatments, this study employed different measurements. It is unclear whether the measurement affected the test results. It is worth conducting a further test using the same measurements. The results of future studies can be compared with those of this study. The homogeneity of the control group and treatment group is questionable. Futher studies may employ homogeneous sample group to evaluate whether the sample characteristics bias the test results. Assertiveness training or value clarification training for nurses can be utilized in nursing intervention.