• Journal of Industrial Convergence
• /
• v.22 no.7
• /
• pp.43-48
• /
• 2024

In this study, we evaluated the effectiveness of a taping method to relieve low back pain (LBP) by comparing changes in visual analog scale (VAS) and disability index (Disa) between untreated, control, and treated groups. As a result, the efficacy of taping was confirmed in both the control and treatment groups. ANOVA analysis of VAS revealed significant differences between groups, and post hoc tests revealed significant differences in the untreated group and both the control and treatment groups, but no significant differences between the control and treatment groups. This demonstrates similar effectiveness of both taping methods on alleviating LBP. For Disa, ANOVA showed a significant difference, but post hoc tests did not confirm this. The within-group t-test showed significant differences in VAS and Disa in the control and treatment groups before and after the intervention, but not in the untreated group. This study highlights the efficacy of taping for LBP and suggests that both methods can be used clinically. Future studies should use larger samples and different conditions to verify these findings.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.442-449
• /
• 2005

The purpose of the present study was to evaluate the relationship between the amount of cuspal deflection and linear polymerization shrinkage in resin composite and polyacid modified resin composite, For cuspal defelction and shrinkage measurement, Dyract AP, Compoglass F, Z100, Surefil. Pyramid, Synergy Compact, Heliomolar and Heliomolar HB were used. For measuring polymerization shrinkage, a custom made linometer (R&B, Daejon, Korea) was used The amount of shrinkage among materials was compared using One-way ANOVA analysis and Tukey's test at the $95\%$ of confidence level For measuring cuspal deflection of teeth, standardized MOD cavities were prepared in extracted maxillary premolars. After a self-etching adhesive was applied, cavities were bulk filled with one of the felling materials. Fifteen teeth were used for each material. Cuspal deflection was measured by a custom made cuspal-deflection measuring device. One-way ANOVA analysis and Tukey's test were used to determine differences between the materials at the $95\%$ of confidence level, Correlation of polymerization shrinkage and cuspal deflection were analyzed by regression analysis. The amount of polymerization shrinkage from least to greatest was Heliomolar, Surefil < Heliomolar HB < Z100, Synergy Compact < Dyract AP < Pyramid, Compoglass F (p<0.05). The amount of cuspal deflection from least to greatest was Z100, Heliomolar, Heliomolar HB, Synergy Compact Surefil < Compoglass F < Pyramid, Dyract AP (p < 0.05). The amount of polymerization shrinkage and cuspal deflection showed a correlation (p<0.001).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.339-345
• /
• 2020

In the field of defense, one-shot devices such as missiles are stored for a long period of time after they are manufactured, so it is essential to predict their storage life. A study was conducted to find the shelf life of a Li-ion battery used in one-shot devices. To do this, a Li-ion battery that has been used in weapon systems for more than 5 years was secured. A non-functional test was performed on the battery to check for external changes or failures. After the non-functional test, a discharge test was performed to measure the performance after storing it. Through the test, the performance was checked, including the initial charging voltage, discharge time, and battery temperature, and the trend of the change was identified. An F-test, One-way ANOVA, and regression analysis were performed to verify the aging, and the shelf life of the battery was estimated by an approximation formula that was derived through a regression analysis. As a result of the ANOVA, the p-value was less than the reference value of 0.05, and the performance of the battery decreased by more than 15% after a certain period of time. This change is assumed to result from the change in physical properties of the lithium polymer cell.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1153-1162
• /
• 2010

The purpose of this study was to examine the impact of pregnant women's participation in gymnastic exercise on their body evaluation and pregnancy stress. The subjects in this study were 100 female pregnant adults who were aged between 20 and 39 and resided in the region of Gangbook, Seoul. Out of them, 49 participants got pregnancy exercise, and 51 women didn't. A SPSS WIN 15.0 program was utilized to analyze the collected data, and frequency analysis, factor analysis, reliability analysis, t-test, one-way ANOVA, Scheffe test and multiple regression analysis were conducted. As a result of making a statistical analysis of the data, the following findings were given: First, the demographic characteristics of the pregnant women made differences to their body evaluation and pregnancy stress in part. Second, whether they got pregnancy exercise or not made partial differences to their body evaluation and pregnancy stress. Third, the body evaluation of the pregnant women exerted a partial influence on their pregnancy stress.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.77-86
• /
• 2016

Drivers can receive diverse types of traffic information through a number of methods. However, there are not enough information services considering human factors. In this study, as a basic research on human factors of the drivers, characteristic analysis on drivers' mean glance (fixation) durations with different running speeds on the expressway was performed under diverse running environments. To control variables other than running speeds, running environments were categorized into 4 types: 'daytime running without preceding vehicles', 'daytime running with preceding vehicles', 'nighttime running without preceding vehicles', and 'nighttime running with preceding vehicles'. Furthermore, ANOVA Test was used to divide speed groups. As a result of performing a multiple comparison to compare differences in glance behavior per each group, the road item and the preceding vehicles item showed an increase in mean glance durations as the speed increased, while the front view showed a decrease in mean glance durations. It was confirmed that the road sign showed no statistically significant difference in glance durations as the speed varied.

• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.363-372
• /
• 2013

When retrieving music with folksonomy tags, internal use of numeric tags (AV tags: tags consisting of Arousal and Valence values ) instead of word tags can partially solve the problem posed by synonyms. However, the two predecessor tasks should be done correctly; the first task is to map word tags to their numeric tags; the second is to get numeric tags of the music pieces to be retrieved. The first task is verified through our prior study and thus, in this paper, its significance is seen for the second task. To this end, we propose the music mapping table defining the relation between AV values and music and ANOVA tests are performed for analysis. The result shows that the arousal values and valence values of music have different distributions for 12 mood tags with or without synonymy and that their type I error values are P<0.001. Consequently, it is checked that the distribution of AV values is different according to music mood.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.363-373
• /
• 2014

PURPOSE: The purpose of this study was of scale using auditory biofeedback training and kinging training on walking speed and weight bearing ratio in patients hemiplegia with stroke to determine of the effects of such training would be maintained even after stopping the intervention. METHODS: The 30 subject were classified into three groups : 12 times, 3 times a week receiving the control, the experimental group scale using auditory and kicking training for 4 weeks. In addition, all subjects in the control group and experimental groups received the same general exercise treatment 12 times, 3 times a week for 4 weeks, and underwent follow-up tests. The significance of differences between the control group and the experimental groups was analysis by repeated-ANOVA, Interaction time and groups was analysis by repeated-ANOVA. In case where there were differences, post-hot tests were conducted using repeated measure ANOVA. RESULTS: There were significant differences in 10 m walking speed and weight bearing ratio between the control group and experimental group after the performance of the scale using auditory training and kicking training. Scale using auditory biofeedback training 4 weeks was more effective than kicking training. After 8 weeks weight bearing ratio maintained on scale using auditory training. CONCLUSION: These finding suggest that the scale using auditory biofeedback training and kicking training has positive effects on hemiplegia with stroke.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.367-373
• /
• 2018

PURPOSE. To evaluate the fit of a crown produced based on a 3D printed model and to investigate its clinical applicability. MATERIALS AND METHODS. A master die was fabricated with epoxy. Stone dies were fabricated from conventional impressions (Conventional stone die group: CS, n=10). Digital virtual dies were fabricated by making digital impressions (Digital Virtual die group: VD, n=10). 3D data obtained from the digital impression was used to fabricate 3D printed models (DLP die group: DD, n=10, PolyJet die group: PD, n=10). A total of 40 crowns were fabricated with a milling machine, based on CS, VD, DD and PD. The inner surface of all crowns was superimposed with the master die files by the "Best-fit alignment" method using the analysis software. One-way and 2-way ANOVA were performed to identify significant differences among the groups and areas and their interactive effects (${\alpha}=.05$). Tukey's HSD was used for post-hoc analysis. RESULTS. One-way ANOVA results revealed a significantly higher RMS value in the 3D printed models (DD and PD) than in the CS and DV. The RMS values of PD were the largest among the four groups. Statistically significant differences among groups (P<.001) and between areas (P<.001) were further revealed by 2-way ANOVA. CONCLUSION. Although the fit of crowns fabricated based on the 3D printed models (DD and PD) was inferior to that of crowns prepared with CS and DV, the values of all four groups were within the clinically acceptable range (<$120{\mu}m$).

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.122-128
• /
• 2002

The laser welding in the automotive industries has been used widely for the butt joint of blank sheets rather than the lap joint of automotive body panels. But as a substitute far the spot welding of automotive body panels, the so called three dimensional laser welding will be important far the body panel engineers. Specially the laser welding of body panels with a smooth weld line is applied increasingly, for example, to the side panels. So far, some criteria of the laser weld quality was suggested by in-house regulations or national standards from experiences and/or rule of thumbs. In the manufacturing places, a go or no-go criterion is adopted because of the simplicity or a lack of rational criteria. It is true specially for the selection of the process parameters, which gives the basic causes for the good quality of laser welds. In this study, the effects of joint combination, gap and welding speed on the lap joint $CO_2$ laser welding of two mild steel sheets with different thicknesses are obtained through a $2{\times}3{\times}7$ factorial experiment. The results of the weld quality are statistically analysed using analysis of variance (ANOVA) and compared between two characteristic zones, which are separated by the type of sectional shapes and the level of input energy per volume. The thickness combinations are 0.8mm/1.2mm, 1.2mm/0.8mm of mild steel sheets. The welding speed covers from the deep penetration to the partial penetration. The gap size has three levels of no-gap, 0.16m, and 0.26mm. The bead width, penetration depth and input energy per volume are measured and used as the weld quality criteria.

• The Korean Journal of Applied Statistics
• /
• v.26 no.6
• /
• pp.873-887
• /
• 2013

The axis of rotation in biomechanics is a major tool to investigate joint function; therefore, many methods to estimate the axis of rotation have been developed. However, there exist several problems to describe, estimate, and test the axis statistically. The axis is directional data(axial data) and it should not be analyzed with traditional statistics. A proper comparative method should be considered to compare axis estimating methods for the same given data ANOVA (analysis of variance) is a frequently used statistical method to compare treatment means in experimental designs. In case of the axial data response assumed to come from Watson distribution, there are a few ANOVA method options. This study constructed ANOVA models for within-subjects designs of axial data. Two models (one within-subjects factor and two within-subjects factors crossed design) were considered. The empirical data used in this study were instantaneous axes of rotation of flexion/extension at the knee joint and the flexion/extension and pronation/supination at the elbow joint. The results of this study can be further applied to the various analysis of experimental designs.