• 응용통계연구
• /
• 제35권5호
• /
• pp.579-591
• /
• 2022

함수 데이터는 다양한 분야에서 수집되고 있으며, 집단 간의 함수 데이터를 비교해야하는 경우가 종종 발생한다. 이럴 경우 점별 분산분석 방법을 이용하여 설명하기에는 무리가 있으며, 통합된 결과를 제시할 필요가 있다. 이에 대한 다양한 연구가 제안되었으며, 최근에 R 패키지 fdANOVA로 구현되었다. 이 논문에서 우선 분산분석 및 다변량 분산분석을 설명하고, 최근에 제안된 다양한 단변량 및 다변량 함수 데이터 분산분석을 설명하고자 한다. 또한 R 패키지 fdANOVA의 사용 방법을 설명하고, 이 패키지를 이용하여 서울과 부산 지역의 주별 기온을 단변량 함수 데이터 분산분석을 통해 비교하고, 손글씨 이미지를 다변량 함수 데이터로 변환하여 다변량 함수 데이터 분산분석을 이용하여 비교하고자 한다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.61-68
• /
• 2013

PURPOSES : The purpose of this study is to study the noise reducing effect of Micro Surfacing by comparing general asphalt, longitudinal tining and Slurry Seal. METHODS : This study measures vehicles' noise of each section by the NCPX method that can measure noise between the road surface and the tire at the field. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the field data of each section. Total sound pressure level is compared by ANOVA test statistically. After ANOVA test, post-hoc test is conducted to know mean difference of surface type by Tukey. RESULTS : As the result of CPB analysis to confirm sound pressure levels by frequency, it was shown that sound pressure levels by frequency are totally similar except for those of frequency bands between 100Hz and 500Hz. The result of ANOVA test and post-hoc test, it was shown that sections of surface type have a difference. The result of Micro Surfacing was lower 2~5dB(A) than other surface type. CONCLUSIONS : It is found that the noise reduction performance of Micro Surfacing was better than other surface type.

• 대한화장품학회지
• /
• 제39권2호
• /
• pp.105-115
• /
• 2013

국내의 주름개선 혹은 미백 효능을 평가하기 위한 인체시험 방법은 식약청 가이드라인에 근거하여 시행 되어왔으며, 인체시험에서 육안평가 및 기기평가 결과에 대해 시험군과 대조군 간의 효과를 비교하기 위해서 unpaired t-test를 주로 이용하였고, 시술 전후의 효과를 비교하기 위해서 paired t-test를 이용하였다. 설문평가 결과에 대해서는 빈도분석을 이용한 기술통계법이 이용되고 있다. 미국 및 유럽의 임상 평가기관에서도 이와 유사한 시험법 및 통계분석 방법을 이용하고 있다. 그러나 동일 개체에 대하여 처치를 반복 적용하여 얻은 자료는 서로 관련성이 높아 이를 감안한 분석법을 적용해야 한다. 따라서 본 연구에서는 화장품 분야에서는 처음으로 기능성 화장품 중 주름 개선 및 미백 효능 시험의 육안평가 및 기기평가 자료에 대해 repeated measures ANCOVA (RM ANCOVA)와 repeated measures ANOVA (RM ANOVA)를 적용하여 통계 방법의 타당성 여부를 검증함으로서 현재의 인체시험 방법에 적합한 새로운 통계분석 방법을 제시하였다.

• 산업융합연구
• /
• 제21권10호
• /
• pp.57-63
• /
• 2023

평활근 수축에 대한 감초산(glycyrrhizic acid)의 효과를 연구하고자 하였고 관련 상세 기전을 결정하기 위해 glycyrrhizic acid가 agonist-sensitive하게 평활근 수축한다는 가설을 제시하였다. S/D rats의 평활근을 수조 내 준비하였고 신호 변환기에서 평활근에 의한 운동 신호가 전기적 신호로 변환되어 생리기록기에 표시되는 데이터는 일원배치 분산분석으로 분석하였다. 재미있게도, 감초산은 불화물, 트롬복산 유사체 등 굵은 미세섬유성 조절성 수축제에 의한 평활근 수축을 중등도로 억제하였고 (농도 0.01, 0.03, 0.1 mM 불화물에서 p=0.113, 0.008, 0.004 (Student's t-test), p=0.113, 0.008, 0.004 (One way ANOVA), 그리고 0.01, 0.03, 0.1 mM 트롬복산 유사체에서 p=0.156, 0.004, 0.003 (Student's t-test), p=0.156, 0.004, 0.003 (One way ANOVA)) 포볼 에스테르 등 가는 미세섬유성 조절성 수축제에 의한 평활근 수축에 대해 효과가 소실되었다 (0.01, 0.03, 0.1 mM 포볼 에스테르에서 p=0.392, 0.086, 0.065 (Student's t-test), p=0.392, 0.086, 0.065 (One way ANOVA)). 이러한 결과는 내피 기능이 억제된 평활근에서 감초산은 평활근 내피에서 EDRF (NO) 생성 효과 외에 주로 ROCK 활성 감소 등 평활근에 대한 직접적 효과를 통해 최종적으로 평활근에서 악틴-미오신 상호작용을 제한하여 평활근을 이완시키는 것으로 생각된다.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.224-230
• /
• 2017

The purpose of this study is to classify the deficient abilities of seafarers into SRK (Skill, Rule, and Knowledge) and analyze and identify the SRK by the type of accident and ship. Experimental data used the SRK cumulative frequency for 1,606 marine accident records and two-way ANOVA and t-test were used for the analysis tools. The results of two-way ANOVA showed that it is possible to identify the deficient abilities by using the cumulative frequency of SRK in both accident and ship types. As a result of the t-test, the adoption of the null hypothesis (H=0) that the mean of two pairs is equal and the rejection of the null hypothesis (H=1) were 29.2 % and 70.8 %, respectively. For the ship type, H=0 is 33.3 % and H=1 is 66.7 %. Through this study, it was found that about 70 % of the deficient abilities of seafarers inherent in maritime accidents can be identified using the proposed method.

• 한국정보전자통신기술학회논문지
• /
• 제3권1호
• /
• pp.8-12
• /
• 2010

본 연구에서는 t-test와 ANOVA를 이용하여 근전도의 중앙주파수 추출을 위한 AR모델 차수결정 및 중앙주파수 비교에 관한 연구이다. 근전도의 근피로와 관계된 특징인자인 영교차율 및 저대역에너지, 중앙주파수를 추출하여 근피로에 이를 때까지의 변화를 평가해 봄으로써 근피로 정도나 시점까지의 변화 정도를 비교 및 고찰하였다.

• Journal of Pharmaceutical Investigation
• /
• 제24권2호
• /
• pp.67-72
• /
• 1994

Bioequivalence (BE) test of biphenyl dimethyl dicarboxylate (DDB) tablets was performed. Normal healthy male volunteers (n = 20) were randomly divided into 2 groups, and reference $(Nissel{\circledR})$ and test $(Livital{\circledR})$ tablets of DDB $(25mg{\times}8\;Tab.\;= \;200\;mg)$ were given orally by balanced two-period cross-over design. The serum concentration was determined by high performance liquid chromatography. The pharmacokinetic parameters, AUC, $C_{max}$, and $T_{max}$ obtained after drug administration were statistically analyzed. Statistical evaluation of the data involved an analysis of variance (ANOVA) for cross-over design. The results were within 20% differences of mean value in AUC, $C_{max}$, and $T_{max}$ between reference and test tablets. The results of ANOVA showed no significant differences for "between group or subject" and "period". The test tablet was bioequivalent with the reference tablet in the AUC, $C_{max}$, and $T_{max}$.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.161-165
• /
• 2010

In the present study, process optimization for thermal-sprayed STS316 coating has been performed using $L_9(3^4)$ orthogonal array and analysis of variance (ANOVA). STS316 coatings were fabricated by flame spray process on steel substrate, and the hardness test and microstructure observation of the coatings were studied. The results of hardness test were analyzed by ANOVA. The ANOVA results showed that the spray distance had the greatest effect on hardness of the coating, on the other hands, the effects of oxygen gas flow and spray distance were ignorable. From these results, the optimal combination of the flame spray parameters could be derived, and confirmation experiment was carried out to verify these derived results. The calculated hardness of the coatings by ANOVA was found to approximately close to that of confirmation experimental result. Thus, it was considered that design of experiments using orthogonal array and ANOVA was effective for process optimization of thermal-sprayed STS316 coating.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.89-94
• /
• 2009

In this work, the optimal process has been designed by $L_9(3^4)$ orthogonal array and analysis of variance(ANOVA) for thermal-sprayed Ni-based hard coating. Ni-based hard coatings were fabricated by flame spray process on steel substrate. Then, the hardness test and observation of microstructure of the coatings were performed. The results of hardness test were analyzed by ANOVA. The ANOVA results demonstrated that the acetylene gas flow had the greatest effect on hardness of the coatings. The oxygen gas flow was found to have a neglecting effect. From these results, the optimal combination of the flame spray parameters could be predicted. The calculated hardness of the coatings by ANOVA was found to lie close to that of confirmation experimental result. Thus, it was considered that design of experiments design using orthogonal array and ANOVA was useful to determine optimal process of thermal-sprayed Ni-based hard coating.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.245-251
• /
• 2008

The research proposes three ANOVA(Analysis of Variance) tests using expected mean square(EMS) algorithms in various split-plot designs. The variance tests consist of Never-Pool test, Sometimes-Pool test and Always-Pool test. This paper also presents two EMS algorithms such as standard method and easy method. These algorithms are useful to make a decision rule for pooling. Numerical examples are illustrated for various split-plot designs such as split-plot designs, split-split-plot designs, repetition split-plot designs, and nested designs. Pragmatically, the results are summarized and compared with popular ANOVA spreadsheets and data model equations.