• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.145-153
• /
• 2009

The purpose of this study was to evaluate the effect of instrument compliance on the polymerization shrinkage stress measurements of dental composites. The contraction strain and stress of composites during light curing were measured by a custom made stress-strain analyzer, which consisted of a displacement sensor, a cantilever load cell and a negative feedback mechanism. The instrument can measure the polymerization stress by two modes: with compliance mode in which the instrument compliance is allowed, or without compliance mode in which the instrument compliance is not allowed. A flowable (Filtek Flow: FF) and two universal hybrid (Z100: Z1 and Z250: Z2) composites were studied. A silane treated metal rod with a diameter of 3.0 mm was fixed at free end of the load cell, and other metal rod was fixed on the base plate. Composite of 1.0 mm thickness was placed between the two rods and light cured. The axial shrinkage strain and stress of the composite were recorded for 10 minutes during polymerization. and the tensile modulus of the materials was also determined with the instrument. The statistical analysis was conducted by ANOVA. paired t-test and Tukey's test (${\alpha}<0.05$). There were significant differences between the two measurement modes and among materials. With compliance mode, the contraction stress of FF was the highest: 3.11 (0.13). followed by Z1: 2.91 (0.10) and Z2: 1.94 (0.09) MPa. When the instrument compliance is not allowed, the contraction stress of Z1 was the highest: 17.08 (0.89), followed by FF: 10.11 (0.29) and Z2: 9.46 (1.63) MPa. The tensile modulus for Z1, Z2 and FF was 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa, respectively. With compliance mode. the measured stress correlated with the axial shrinkage strain of composite: while without compliance the elastic modulus of materials played a significant role in the stress measurement.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.286-294
• /
• 2003

The purpose of this study was to analyze the food service management practices and productivity in 49 elementary schools in the Daegu and Gyeongsangbuk-do areas. Survey questionnaires were used to obtain a variety of quantitative and qualitative information, including general food service management and productivity, on elementary school food service systems. Descriptive analysis, $\div$2-test, t-test and one-way ANOVA analysis were used as the statistical methods in this study. Eighteen elementary schools were located in urban areas, 13 in provincial areas and 18 in isolated areas. The average number of meals was 565.1, with a significant difference (p＝0.001) between the areas. The average cost per a meal was 1151.0 Won, with a significant difference (p＝0.001) between the areas. The productivity Index (meal/hour) was 13.5, with a significant difference (p＝0.001) between the areas. There was a significant positive correlation of the productivity Index between the total number of meal, the number of employees, the total food cost, meals per employee and the employee's working period. There was a significant negative correlation between the productivity Index and the number of side dishes, the lost per meal, the labor cost per meal and the employee's job satisfaction degree index (JDI).

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.445-452
• /
• 2010

Objectives: The aim of this study was to compare apical sealing ability and physical properties of MTA, MTA - AH-plus mixture (AMTA) and experimental Portland cement - Epoxy resin mixture (EPPC) for a development of a novel retro-filling material. Materials and Methods: Forty-nine extracted roots were instrumented and filled with gutta-percha. Apical root was resected at 3 mm and the retro-filling cavity was prepared for 3 mm depth. Roots were randomly divided into 3 groups of 15 roots each. The retro-filling was done using MTA, AMTA, and EPPC as the groups divided. Four roots were used as control groups. After setting in humid condition for 24 hours, the roots were immersed in 1% methylene blue dye solution for 72 hours to test the apical leakage. After immersion, the roots were vertically sectioned and photos were taken to evaluate microleakage. Setting times were measured with Vicat apparatus and digital radiographs were taken to evaluate aluminum equivalent thickness using aluminum step wedge. The results of microleakage and setting time were compared between groups using one-way ANOVA and Scheffe's post-hoc comparison at the significance level of 95%. Results: AMTA and EPPC showed less microleakage than MTA group (p < 0.05). AMTA showed the highest radio-opacity than other groups and the novel EPPC showed 5 mm aluminum thickness radio-opacity. EPPC showed the shortest initial and final setting times than other groups while the MTA showed the longest (p < 0.05). Conclusions: Under the condition of this study, the novel composite using Portland cement-Epoxy resin mixture may useful for retro-filling with the properties of favorable leakage resistance, radio-opacity and short setting time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.211-218
• /
• 2019

Purpose: The purpose of the present study was to compare the accuracy of four different metal copings fabricated by CAD/CAM technology and to evaluate clinical effectiveness. Materials and methods: Composite resin tooth of the maxillary central incisor was prepared for a metal ceramic crown and duplicated metal die was fabricated. Then scan the metal die for 12 times to obtain STL files using a confocal microscopy type oral scanner. Metal copings with a thickness of 0.5 mm and a cement space of $50{\mu}m$ were designed on a CAD program. The Co-Cr metal copings were fabricated by the following four methods: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). Silicone replica technique was used to measure marginal and internal discrepancies. The data was statistically analyzed with One-way analysis of variance and appropriate post hoc test (Scheffe test) (${\alpha}=.05$). Results: Mean marginal discrepancy was significantly smaller in the Group WM ($27.66{\pm}9.85{\mu}m$) and Group MS ($28.88{\pm}10.13{\mu}m$) than in the Group RP ($38.09{\pm}11.14{\mu}m$). Mean cervical discrepancy was significantly smaller in the Group MS than in the Group RP. Mean axial discrepancy was significantly smaller in the Group WM and Group MS then in the Group RP and Group SLM. Mean incisal discrepancies was significantly smaller in the Group RP than in all other groups. Conclusion: The marginal and axial discrepancies of the Co-Cr coping fabricated by the Wax pattern milling and Milling/Sintering method were better than those of the other groups. The marginal, cervical and axial fit of Co-Cr copings in all groups are within a clinically acceptable range.

• Sleep Medicine and Psychophysiology
• /
• v.24 no.2
• /
• pp.106-117
• /
• 2017

Objectives: Obstructive sleep apnea (OSA) is a sleep-related breathing disorder that is characterized by repetitive collapse or partial collapse of the upper airway during sleep in spite of ongoing effort to breathe. It is believed that OSA is usually worsened in REM sleep, because muscle tone is suppressed during REM sleep. However, many cases showed a higher apnea-hypopnea index (AHI) during NREM sleep than during REM sleep. We aimed here to determine the characteristics of REM sleep-dependent OSA (REM-OSA) and NREM sleep-dependent OSA (NREM-OSA). Methods: Five hundred sixty polysomnographically confirmed adult OSA subjects were studied retrospectively. All patients were classified into 3 groups based on the ratio between REM-AHI and NREM-AHI. REM-OSA was defined as REM-AHI/NREM-AHI > 2, NREM-OSA as NREM-AHI/REM-AHI > 2, and the rest as sleep stage-independent OSA (IND-OSA). In addition to polysomnography, questionnaires related to subjective sleep quality, daytime sleepiness, and emotion were completed. Chi-square test, ANOVA, and ANCOVA were performed. Results: There was no age difference among subgroups. The REM-OSA group was comprised of large proportions of mild OSA and female OSA patients. These patients experienced poor sleep and more negative emotions than other two groups. The AHI and oxygen desaturation index (ODI) were lowest in REM-OSA. Sleep efficiency and N3 percentage of REM-OSA were higher than in NREM-OSA. The percentage of patients who slept in a supine position was higher in REM-OSA than other subgroups. IND-OSA showed higher BMI and larger neck circumference and abdominal circumference than REM-OSA. The patients with IND-OSA experienced more sleepiness than the other groups. AHI and ODI were highest in IND-OSA. NREM-OSA presented the shortest total sleep time and the lowest sleep efficiency. NREM-OSA showed shorter sleep latency and REM latency and higher percentage of N1 than those of REM-OSA and the highest proportion of those who slept in a lateral position than other subgroups. NREM-OSA revealed the highest composite score on the Horne and ${\ddot{O}}stberg$ questionnaire. With increased AHI severity, the numbers of apnea and hypopnea events during REM sleep decreased, and the numbers of apnea and hypopnea events during NREM sleep increased. The results of ANCOVA after controlling age, sex, BMI, NC, AC, and AHI showed the lowest sleep efficiency, the highest AHI in the supine position, and the highest percentage of waking after sleep onset in NREM-OSA. Conclusion: REM-OSA was associated with the mild form of OSA, female sex, and negative emotions. IND-OSA was associated with the severe form of OSA. NREM-OSA was most closely related to position and showed the lowest sleep efficiency. Sleep stage-dependent characteristics could provide better understanding of OSA.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.37-46
• /
• 2011

Since the Korean retail industry was made accessible to the big conglomerates and foreign retail companies, local traditional markets have faced serious problems. To sustain the local traditional markets' survival, the Korean government established various remedial policies for addressing, and many scholars published articles to suggest how to find solutions to, the problem. Unfortunately, the results have not been satisfactory. The purpose of this study is to find another way to help the Korean traditional retail market, from the view point of the Green Growth Policy, an initiative designed to address environmentally balanced economic growth in Korea. In order to survive and to maintain sustainable growth, it is incumbent upon retailers in the traditional market to understand the concept of the Green Growth Policy. A survey was conducted as a means of testing the degree of awareness of the Green Growth Policy, as well as determining the relationship between the degree of awareness and the degree of organizational commitment by the retailers in the local traditional markets. Interestingly, we were able to detect some of the features (e.g., they were distinguished by the elderly and the young, as well as low level of education and high level of education) in the traditional market retailers' demographic characteristics. We utilized the analysis of variance (ANOVA) statistical method to simultaneously compare the differences in retailers' demographic characteristics; the results were as follows: Overall, the results showed that the awareness of the Green Growth Policy, the degree of trust in the government's policy, levels of self-efficacy, and levels of organizational commitment were higher with the older traditional market retailers than the younger traditional market retailers. Specifically, the degree of trust in government policies (F=9.964,p < .05), levels of self-efficacy (F=5.532,p < .05), and levels of organizational commitment (F=5.697,p < .05) were statistically significant. Moreover, in the portion of the study that addressed the difference between education levels, all the variables were averaged in the higher education category of the traditional market retailers. Specifically, awareness levels of the Green Growth Policy (F=8.564,p < .005) and levels of self-efficacy (F=6.754,p < .005) were statistically significant. These results revealed that the traditional market retailers' demographic characteristics should be considered important factors in order to realize their policy. The results of the study showed the following: 1) The degree of awareness of the government's Green Growth Policy was statistically significant as it related to traditional market retailers' organizational commitment. 2) The degree of trust of the government's policy was significantly moderated between the awareness of the government's Green Growth Policy and the traditional market retailers' organizational commitment. This result demonstrates that the traditional market retailers' awareness of the government's Green Growth Policy will show more organizational commitment with higher levels of trust of the government's policy. 3) It also revealed that traditional market retailers' self-efficacy was fully mediated between the awareness of the Green Growth Policy of the government and traditional market retailers' organizational commitment. The results suggest that the government should show an interest in showing traditional market retailers how to enhance their traditional markets. Implications and future research directions are also discussed.