• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.287-290
• /
• 2001

The 9.17MeV gamma-rays from the $^{13}C(p,\;{\gamma})^{14}N,\;^{14}N({\gamma},\;{\gamma})^{14}N$ reactions were measured. The incident 9.17MeV gamma-ray was produced from the $^{13}C(p,\;{\gamma})^{14}N$ reaction at Ep=1.75MeV resonance. The 1.75MeV proton beam was accelerated using the 3MV SNU-AMS Tandetron and 1.7MV KIGAM Tandem accelerators. The enriched 13C target was $121{\mu}g/cm^2$ self-supporting foil, and we used liquid nitrogen as a resonant absorption target. We used a HP-Ge detector with 30% efficiency and less 2keV energy resolution. We developed new method to detect the scattered 9.17MeV gamma-ray from the nitrogen target by using the energy difference between the Doppler shifted gamma-ray from the $^{13}C(p,\;{\gamma})^{14}N$ reaction and the resonant absorbed and rescattered gamma-ray from the $^{14}N({\gamma},\;{\gamma})^{14}N$ reaction.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.209-212
• /
• 2001

Aircraft industry is developed very fast so titanium scrap was generated to manufacture. Titanium scrap was wasted and used to deoxidize cast iron so we are study recycling of it. In this research were studied that metal hydride of reacted in hydrogen chamber of AMS4900, 4901, return scrap titanium alloy and sponge titanium granule. The temperature of hydrogenation was 40$0^{\circ}C$ in the case of pure sponge titanium but return scrap titanium alloy were step reaction temperature at 40$0^{\circ}C$ and 50$0^{\circ}C$, and after the hydride of titanium alloy were crushed by ball mill for 5h. Titanium hydride contains to 4wt.% of hydrogen theoretically as theory. It was determined by heating and cooling curve in reaction chamber. The result of XRD was titanium hydride peak only that it was similar to pure titanium. Titanium hydride Powder particle size was about 45${\mu}{\textrm}{m}$, and recovery ratio was 95w% compared with scrap weight for a aluminum foam agent.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.838-844
• /
• 2012

This paper proposes the effective monitoring method for marine engine system, which is implemented based upon Controller Area Network (CAN). As the marine engine monitoring system requires various kind of information, a lot of sensor nodes are distributed to several places. The CAN supports huge numbers of message IDs for the sensor nodes and provides a stable communication channel in a wide area such as a 12,000 TEU container ship. Since the CAN is priority-based communication system, some of hard real-time messages like alarm messages which are time-critical to the operation of the vessel cannot be communicated within the dead-time. Therefore it is desirable to distinguish the bandwidth of the CAN for static state messages and transition-state messages not to be harmful to the engine operations. Using the features of message arbitration ability of the CAN, it is proposed in this paper that the bandwidth allocation is dynamically adjusted to cope with the increment of input signal to improve the performance of monitoring system. Effectiveness and validity of the proposed scheme have been demonstrated through real experiments.

• Korean Journal of Adult Nursing
• /
• v.26 no.2
• /
• pp.159-170
• /
• 2014

Purpose: This research investigated the degree and predictors of hot flashes and hypogonadism symptoms in patients with prostate cancer receiving hormone replacement therapy. Methods: The subjects were 111 patients with prostate cancer receiving hormone replacement therapy in two university hospitals located in D city. The measurement tools included Hot Flash Diary and AMS (Aging Male's Symptoms rating scales). The data were analyzed using t-test, ANOVA, and binary logistic regression analysis. Results: The percentage of patients who experienced hot flashes among the participants was 14.4%. The predictors for hot flashes were eating irregularly, having coffee frequently and the types of hormone. The average score of hypogonadism symptom was 2.16 out of five-point scale and the highest score of hypogonadism symptom was the sexual symptoms (2.77 out of five-point scale). The predictors for hypogonadism symptom were eating habits and years of having the illness. Conclusion: These findings provide the information that irregularly eating habit was an important factor in hot flashes and hypogonadism symptoms of the participants. Therefore the development of a nutritional education encouraging regular meals is necessary for the given population.

• Animal Systematics, Evolution and Diversity
• /
• v.23 no.2
• /
• pp.229-235
• /
• 2007

Two euplotid ciliates collected from the estuarine littorals in Korea were identified as Euplotes vannus ($M\ddot{u}ller$, 1786) and E. parawoodruffi Song and Bradbury, 1997. These species are reported taxonomically for the first time from Korea. These two species are redescribed with illustrations, photos and biometry based on live and silver impregnated specimens. Diagnostics of each species are as follows. E. vannus: size in vivo $94-111{\times}55-75{\mu}m$ (average $103{\times}60{\mu}m)$, adoral zone of membranelles (AZM) 70% of cell length with 57-74 adoral membranelles (AM) and terminating close to hook-shape, macronucleus (Ma) C-shaped with twisted foot-like, 10 frontoventral (FVC), 5 transverse (TC), 4-7 (average 5) caudal cirri (CC), 9-10 dorsal kineties (DK), mid dorsal kinety with 15-22 cilia; silver-line system single vannus type. E. parawoodruffi: size in vivo $125-163{\times}72-100{\mu}m$, (average $141{\times}87{\mu}m$), dorsally strongly arched, body shaped reserved triangular. AZM 67-83% of cell length with 60-85 AMs, 9 FVC, 5 TC, 4 CC, 9 DK; mid-dorsal kinety with 20-30 cilia, double-eurystomus type, T-shaped Ma with equal sized right and left arms or right arm shortened slightly.

• Animal Systematics, Evolution and Diversity
• /
• v.24 no.2
• /
• pp.191-197
• /
• 2008

Specimens of Diophrys appendiculata (Ehrenberg, ] 838) and D. scutum (Dujardin, 1841) have been collected from the coastal and brackish waters around near Ulsan, during 2004-2007. Diophrys appendiculata and D. scutum are described taxonomically for the first time in Korea. Diagnostic characteristics of these species are as follows. Diophrys appendiculata: size in vivo $43-68{\times}25-50{\mu}m$, adoral zone of membranelles (AZM) covering 43-74% of cell length in impregnated and 46-65% in vivo specimens with 32-47 adoral membranelles (AM). Paroral membrane is slightly curved. Four to five dorsal kinetal (DK) rows are fragmented and anterior and posterior parts of rows densely ciliated. Two macronuclear nodules (Ma) irregular and elongated oval in shape and widely separated. D. scutum: size in vivo $125-225{\times}75-140{\mu}m$, AZM extending to the middle of right border of body and covering 50-60% of cell length with 56-75 AMs. Body shape is typically ovoid with prominent concave margin at right posterio-lateral end, and rather thick and wide longitudinal ridge along lower buccal cavity on ventral side. Two macronuclei shaped like a sausage. five to six dorsal kineties.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.357-367
• /
• 1996

A total of 113 samples (basalts, tuffs, and siltstones from coal-bearing sediments) was collected from 14 sites of the Tertiary Changgi basin in southeastern Korea, and studied palaeomagnetically. Site-mean declination of the ChRM from 5 sites was found to be deflected clockwise about $30^{\circ}$. Other 5 sites showed no vertical-axis deflection of ChRM direction. In consideration of previous palaeomagnetic data from other Tertiary basins in the vicinity, it is interpreted that the deflection of ChRM directions has been caused by NNW-SSE simple shear associated with the opening of the East Sea, and the time of rotation should be about 16 Ma. Other 2 sites showed counterclockwise deflection of site-mean ChRM. These sites might be located among lager tectonic blocks which were rotating clockwise. AMS (anisotropy of magnetic susceptibility) study revealed $NE{\rightarrow}SW$ directed magnetic lineation at two tuffaceous sites. This might indicate flow direction of tuffs during the time of deposition. Most of the other sites showed load-foliation lying subparallel to the bedding plane. This must have been caused by gravitational loading acted vertically to the strata.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2020

As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3124-3126
• /
• 2000

The application of IR(Infrared) communication is very wide and IR receiver has become a standard of home entertainment. A preamplifier with single 5V supply was designed for IR receiver IC. To operate at long distance, receiver IC should have high gain and low noise characteristic. To provide constant output signal magnitude, independent of transciever distance, gain limiting stage is needed. And to cut-off DC noise component effectively, large resistance and capacitance are required. Transimpedance type preamplifier, and diode limiting amplifier, and current limiting amplifier were designed. It is another function of current limiting amplifier that transforms single input signal to differential output signal. Using AMS BiCMOS model, both BJT version and MOS version was designed. Total power consumption is O.lmW, and IC size is $0.3mm^2$

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.23-28
• /
• 1997

We discuss development of a simulator for automated manufacturing systems (AMSs) which have sophisticated automated material handling equipments and complicated work flows. The simulator is designed to satisfy the following requirements. A user should be able to easily configure or specify an AMS through a graphical user interface (GUI) and minimal data input. The user should be able to model diverse and complied control logic for automated material handling systems like automated guided vehicle (AGV) systems, robot workcell systems and conveyor systems as well as complicated job flow program. Real time animation is desired. Finally, the simulator should be easily maintained and extended. To satisfy the requirements, we use an object-oriented paradigm for modeling, designing, and programming of the simulator. We use an object-oriented modeling framework to design the modeling elements library, and take the process interaction approach for scheduling processes and events. To model a user-defined diverse control logic, we also develop a script language and its interpreter. We explain design and implementation strategies. We implement the simulator using Visual C++ 4.2 and Open GL on Windows NT and the Windows95. Some modeling examples will be demonstrated.