• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.76-82
• /
• 1998

Increase of greenhouse gas due to $CO_2$ and CH$_4$ gases would cause the global warming in the atmosphere. According to the global circulation model, it is pointed out in the Okhotsk Sea that the large increase of atmospheric temperature might be occurredin this region by global warming due to the doubling of greenhouse effectgases. Therefore, it is very important to monitor the sea ice extents in the Okhotsk Sea. To improve the sea ice extents and concentration with more highly accuracy, the field experiments have begun to comparewith Airborne Microwave Radiometer (AMR) and video images installed on the aircraft (Beach-200). The sea ice concentration is generally proportional to the brightness temperature and accurate retrieval of sea ice concentration from the brightness temperature is important because of the sensitivity of multi-channel data with the amount of open water in the sea ice pack. During the field experiments of airborned AMR the multi-frequency data suggest that the sea ice concentration is slightly dependending on the sea ice types since the brightness temperature is different between the thin and small piece of sea ice floes, and a large ice flow with different surface signatures. On the basis of classification of two sea ice types, it is cleary distinguished between the thin ice and the large ice floe in the scatter plot of 36.5 and 89.0GHz, but it does not become to make clear of the scatter plot of 18.7 and 36.5GHz Two algorithms that have been used for deriving sea ice concentrations from airbomed multi-channel data are compared. One is the NASA Team Algorithm and the other is the Bootstrap Algorithm. Intrercomparison on both algorithms with the airborned data and sea ice concentration derived from video images bas shown that the Bootstrap Algorithm is more consistent with the binary maps of video images.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.71-76
• /
• 2012

Malignant mesothelioma is an uncommon but rapidly fatal disease for which the principal aetiological agent is exposure to asbestos. Mesothelioma is of particular significance in Australia where asbestos use was very widespread from the 1950s until the 1980s. Exposure to asbestos includes occupational exposure associated with working with asbestos or in workplaces where asbestos is used and also 'take-home' exposure of family members of asbestos exposed workers. Asbestos exposure may also be nonoccupational, occurring as a consequence of using asbestos products in non-occupational contexts and passive exposure is also possible, such as exposure to asbestos products in the built environment or proximity to an environmental source of exposure, for example an asbestos production plant. The extremely long latency period for this disease makes exposure assessment problematic in the context of a mesothelioma registry. OccIDEAS, a recently developed online tool for retrospective exposure assessment, has been adapted for use in the Australian Mesothelioma Registry (AMR) to enable systematic retrospective exposure assessment of consenting cases. Twelve occupational questionnaire modules and one non-occupational module have been developed for the AMR, which form the basis of structured interviews using OccIDEAS, which also stores collected data and provides a framework for generating metrics of exposure.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.261-263
• /
• 2006

전력 계통은 발전설비, 송전설비, 변전설비, 배전설비 등으로 크게 나눌 수 있다. 전력계통을 구성하는 이런 설비들을 원격 감시하고 제어하는 시스템을 전력자동화 시스템이라고 한다. 이런 전력자동화 시스템은 국내 전체 에너지의 수요, 공급, 수송을 제어하는 에너지 관리시스템(EMS : Energy Management System), 송전 및 변전설비의 감시제어를 담당하는 송변전소 감시제어 시스템(SCADA : Supervisory Control And Data Acquisition), 배전계통의 실비관리 및 운영을 담당하는 배전자동화시스템(DAS : Distribution Automation System), 수용가의 계량기를 원격으로 읽어오는 원격검침시스템 (AMR : Automatic Meter Reading) 통으로 구성되어 있다. 국내에서 운용중인 배전자동화 시스템은 배전선로에 설치되어 있는 개폐기만을 원격 감시 및 제어 하는 보편적인 시스템이다. 한편, 2005년도 전력IT 국가 전략과제로 수행하고 있는 배전지능화 시스템 개발 과제에서는 변전소부터 배전계통과 수용가까지의 모든 전력 설비에 대한 원격감시제어가 가능한 시스템을 배전지능화 시스템이라고 정의하고 이의 개발을 추진하고 있다. 본 논문에서는 ABB, SIEMENS, GE와 같은 국외의 배전 자동화 시스템들을 소개하고, 배전지능화 시스템에서 목표로 하고 있는 GIS 기반 위에서 고 저압 배전설비를 관리하고, SCADA, DAS, GIS(Geographic Information System), AMR, TCS(Trouble Call System) 등 배전지능화 시스템의 중앙제어장치가 갖추어야 하는 주요 기능들에 대해 기술하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1109-1116
• /
• 2010

In this paper, some performance characteristics of VoIP(Voice over Internet Protocol) for MANET(Mobile Ad-hoc Networks) with simulation is studied and appropriate condition for implementation of VoIP service is suggested. VoIP simulator is implemented with NS(Network Simulator)-2. VoIP traffic for simulation is generated with some codecs of G.711, G.723.1, G.726-32, G.729A, GSM.AMR and iLBC. As simulation results for traffic transmission under $670{\times}670m$ 50node MANET environment, performance data for MOS(Mean Opinion Score), network delay, packet loss rate and transmission bandwidth are measured. Normalized analysis about measured results shows that maximum VoIP connection satisfying VoIP service quality condition is 15.

• Structural Engineering and Mechanics
• /
• v.89 no.1
• /
• pp.61-75
• /
• 2024

Strengthening of hollow structural sections using through-bolts is a cost-effective and straightforward approach. It's a versatile method that can be applied during both design and service phases, serving as a non-disruptive and budget-friendly retrofitting solution. Existing research on axially loaded hollow sections T-joints has demonstrated that this technique can amplify the joint strength by 50%, where single bolt could enhance the strength of the joint by 35%. However, there's a gap in understanding their use for K-joints. As the behavior of K-joints is more complex, and they are widely existent in structures, this study aims to bridge that gap by conducting comprehensive parametric study using finite element analysis. Numerical investigation was conducted to evaluate the effect of through bolts on K-joints focusing on using single through bolt to achieve most of the strengthening effect. A full-scale parametric model was developed to investigate the effect of various geometric parameters of the joint. This study concluded the existence of optimal bolt location to achieve the highest strength gain for the joint. Moreover, a rigorous statistical analysis was conducted on the data to propose design equations to predict optimal bolt location and the corresponding strength gain implementing the verified by finite element models.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.20-29
• /
• 2014

Recently, LTE is preparing to make a new leap forward LTE-A all over the world. As LTE privides high speed service, the role of mobile phones seems to change from voice to data service. According to Cisco, global mobile data traffic will increase nearly 11-fold between 2013 and 2018. Mobile video traffic will reach 75% by 2018 from 66% in 2013 in Korea. However, voice service is still the most important role of mobile phones. Thus, controllability of throughput and low BLER is indispensable for high-quality VoIP service among various type of traffic. Although the maximum AMR-WB, 23.85 Kbps is sufficient to a VoIP call, it is difficult for the LTE which can provide tens to hundreds of MB/s may not keep the certain level VoIP QoS especially in the cell-edge area. This paper proposes a new scheduling algorithm in order to improve VoIP performance after analyzing various scheduling algorithms. The proposal is the technology which applies more priority processing for VoIP than other applications in cell-edge area based on two-tier scheduling algorithm. The simulation result shows the improvement of VoIP performance in the view point of throughput and BLER.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.103-106
• /
• 2002

This paper has studied a remote AMR(Automatic Meter Reading) system using the power line and the telephone line as a communication media and the digital power meter. In the developed system, because we have used the power line and telephone, the facility is very easy and then its cost is not expensive. The system includes following elements: a digital power meter, an indoor communication system using a power line modem and a telephone line interface system for sending data to the utility company.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.91-97
• /
• 2012

Antimicrobial resistance of foodborne pathogens is an important food safety issue worldwide as well as in Korea. In this study, exposure to antimicrobial resistant (AMR) Stapylococcus aureus was assessed from the consumption of pork based food dishes prepared in food service operations using the Monte Carlo simulation. Thirty five isolates of S. aureus were obtained from 124 semi-processed pork products and their antibiotic resistance patterns were determined. The highest resistance was observed for penicillin (76.7%) followed by ampicillin (70.0%). Two isolates were resistant to oxacillin (6.7%) and no vancomycin resistance was observed. Dietary exposure to penicillin resistant S. aureus as the most frequently observed AMR S. aureus from pork-based dishes was estimated based on contamination data as well as compliance to guidelines for time and temperature controls during food service operations. The mean level of penicillin resistant S. aureus in pork dishes during preparation was below 1 Log CFU/g. As a conservative approach, 95th percentile estimated level of penicillin resistant S. aureus was below the level for toxin production. The estimated probability of staphylococcal intoxication by AMR S. aureus was very low using currently available data.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.179-184
• /
• 2004

Meter reading system, operated by meter staff who reads the meter and record consumption with handhold data terminals. can cause privacy intrusion, unread meter data, abnormal readings and excessive expenses of maintaining the system. To prevent the deterioration of customer service quality, Automatic Meter Reading system, which automatically recognizes meter readings and transmit reading data through wireless RF module, is designed. From collecting the reading data to managing statistics of customer's consumption information. this automatic meter reading system provides more accurate and fast information to customers. By designing this system, customer service satisfaction and reliability can be improve

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.245-251
• /
• 2011

Quantities of data in the DMS (Distribution management system) or SCADA (Supervisory control and data acquisition) system is enormously large as illustrated by the usage of term flooding of data. This enormous quantity of data is transmitted to the status data or event data of the on-site apparatus in real-time. In addition, if GIS (Geographic information system) and AMR (Automatic meter reading), etc are integrated, the quantity of data to be processed in real-time increases unimaginably. Increase in the quantity of data due to addition of system or increase in the on-site facilities cannot be handled through the currently used Single Thread format of data processing technology. However, if Multi Thread technology that utilizes LF-POOL (Leader Follower -POOL) is applied in processing large quantity of data, large quantity of data can be processed in short period of time and the load on the server can be minimized. In this Study, the actual materialization and functions of LF POOL technology are examined.