• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.8-12
• /
• 2008

In this paper, we proposes a D-STTD(Double-Space Time Transmit Diversity) communication system with AMC scheme and analyzes its performance using simulation experiments. The AMC scheme selects an optimal channel coding rate and modulation scheme based on the channel response data for signal transmission, creating a balance between error rate and throughput to improve the overall system throughput and transmission quality. The D-STTD scheme complements the conventional STTD(Space Time Transmit Diversity) scheme, yielding about twice the throughput. The simulation results show that the probability of selecting a high MCS(Modulation and Coding Scheme) level increased as the SNR(Signal to Noise Ratio) improved. Furthermore, the D-STTD communication system with AMC scheme provided a more uniform throughput distribution throughout the entire SNR range compared to its counterpart which did not apply AMC scheme. Also, the maximum throughput of the D-STTD communication system with AMC scheme was twice that of a conventional AMC communication system or a STTD communication system with AMC scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.10-19
• /
• 2012

In this paper, we propose an Adaptive Modulation and Coding (AMC) scheme using relay protocols generally known as Relay Node (RN). The AMC scheme is used for improving the throughput and a reliability of a communication system, because of the nature of different modulation and coding schemes. We analyze the performance of relay protocols with the AMC scheme and observed that relay protocols with the AMC scheme is capable of providing better average throughput at a lower Signal to Noise Ratio (SNR) level as compared to the conventional scheme with no AMC. We perform Monte Carlo simulations with Long Term Evolution-Advanced (LTE-A) parameters to prove the performance comparison of adaptive Modulation and Coding Scheme (MCS) relay protocols with the non-adaptive MCS relay protocols. The simulation results of the proposed system with adaptive MCS prove that among the Amplify-and-Forward (AF), Decode-and-Forward (DF) and DeModulate-and-Forward (DMF), the DMF protocol performs best at a lower SNR value and also provides better average throughput.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.192-199
• /
• 2005

Adaptive Modulation & Coding (AMC) is the method of varying the modulation and coding scheme for the changeable wireless channel environment. WiBro use AMC method because it has a very large variation caused by mobility interference and other cell interference. In this paper, we will compare and analysis the method of selecting the optimum MCS level for the efficiently use of mobile power consumption.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1043-1044
• /
• 2006

In a packet based wireless system, an adaptive modulation and coding (AMC) scheme is often employed with the use of channel quality information (CQI). However, the AMC can be operated improperly due to delayed CQI, causing performance degradation. In this paper, we consider the use of predicted CQI for the AMC considering the feedback delay and channel characteristics. We also consider the use of a hybrid automatic repeat request scheme with the proposed AMC for further improvement in high mobility environments.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.1-9
• /
• 2003

In this paper, we combine AMC (Adaptive Modulation and Coding) with MIMO (Multiple Input Multiple Output) multiplexing to improve the throughput performance of AMC in Next Generation Communication Mobile Systems. In addition, we propose a system that adopts STD (Selection Transmit Diversity) in the combined system. The received SNR (Signal to Noise Ratio) is improved by adopting STD techniques and an improved SNR increases a probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. The computer simulation is performed in flat Rayleigh fading channel. The results show that higher throughput is achieved by AMC-TD schemes. AMC-STTD scheme shows about 250kbps increase in throughput. And AMC-STD with 2 transmit antennas achieves about 420 kbps throughput improvement over the conventional AMC at 9dB SNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.665-671
• /
• 2006

In this paper, we propose and observe a system that adopts Independent-MCS (Modulation and Coding Scheme) level for each layer in the combined AMC-V-BLAST (Adaptive Modulation and Coding-Vertical-Bell-lab Layered Space-Time) system. Also, comparing with the combined system using Common-MCS level, we observe throughput performance improvement. As a result of simulation, Independent-MCS level case adapts modulation and coding scheme for maximum throughput to each channel condition in separate layer, resulting in improved throughput compared to Common-MCS level case. Especially, the results show that the combined AMC-V-BLAST system with Independent-MCS level achieves a gain of 700kbps in $7dB{\sim}9dB$ SNR (Signal-to-Noise Ratio) range.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1622-1631
• /
• 2007

To realize the wireless packet scheduler which efficiently considers both the effect of adaptive modulation and coding (AMC) scheme due to variable wireless communication channel information from physical layer and the QoS differentiation of multimedia services from internet protocol (IP) layer, this paper proposes a new downlink AMC-based priority queuing (APQ) scheduler which combines AMC scheme and service priority method in multimedia services at the same time. The result of numerical analysis shows that the proposed APQ algorithm plays a role in increasing the number of services satisfying the mean waiting time requirements per each service in multimedia services because the APQ scheme allows the mean waiting time of each service to be reduced much more than existing packet scheduler having only user selection processor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.652-657
• /
• 2003

In this paper, Adaptive Modulation and Coding (AMC) is combined with Multiple Input Multiple Output (MIMO) multiplexing to improve the throughput performance of AMC. In addition, a system that adopts Selection Transmit Diversity (STD) in the AMC-MIMO multiplexing system is proposed. The received SNR is improved by adopting STD techniques. And it increases probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. This leads to an increased throughput of the AMC-MIMO system. STD in our simulation selects 2 transmission antennas from 4 antennas and AMC-MIMO multiplexing process operates with the selected antennas. The computer simulation is performed in flat Rayleigh fading channel. The results show that the proposed system achieves a gain of 1Mbps over the AMC-MIMO multiplexing system with the same number of antennas at 15dB SNR.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2008

In this paper, we propose and analyze the AMC (Adaptive Modulation and Coding) system with efficient turbo coded V-BLAST (Vertical-Bell-lab Layered Space-Time) technique. The proposed algorithm adopts extrinsic information from a MAP (Maximum A Posteriori) decoder with iterative decoding as a priori probability in two decoding procedures of V-BLAST scheme; the ordering and the slicing. Also, we consider the AMC system using the conventional turbo coded V-BLAST technique that simply combines the V-BLAST scheme with the turbo coding scheme. And we compare the proposed decoding algorithm to a conventional V-BLAST decoding algorithm and a ML (Maximum Likelihood) decoding algorithm. In addition, we apply a STD (Selection Transmit Diversity) scheme to the systems for better performance improvement. Results indicate that the proposed systems achieve better throughput performance than the conventional systems over the entire SNR range. In terms of transmission rate performance, the suggested system is close in proximity to the conventional system using the ML decoding algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.