• 대한화학회지
• /
• 제60권3호
• /
• pp.194-202
• /
• 2016

Two conjugated semiconducting copolymers consisting of 4,7-bis(4-(2-ethylhexyl)-2-thiophene)-2,1,3-benzothiadiazole (DTBT) and benzo[1,2-b:4,5-b']dithiophene with 5-(2-ethylhexyl)-2,2'-bithiophene (BDTBT) or 5-(2-ethylhexylthio)- 2,2'-bithiophene (BDTBT-S) were designed and synthesized as donor materials for organic photovoltaic cells (OPVs). Alkylthio-substituted PBDTBT-S-DTBT showed a higher hole mobility and lower highest occupied molecular orbital (HOMO) energy level (by 0.08 eV) than the corresponding alkyl-substituted PBDTBT-DTBT. An OPV fabricated using PBDTBT-S-DTBT showed higher V_OC and J_SC values of 0.83 V and 7.56 mA/cm², respectively, than those of a device fabricated using PBDTBT-DTBT (0.74 V) leading to a power conversion efficiency of 2.05% under AM 1.5G 100 mW/cm² illumination.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1756-1760
• /
• 2016

Estimation of feed intake (FI) for individual animals within a pen is needed in situations where more than one animal share a feeder during feeding trials. A partitioning method (PM) was previously published as a model to estimate the individual FI (IFI). Briefly, the IFI of a pig within the pen was calculated by partitioning IFI into IFI for maintenance ($IFI_m$) and IFI for growth. In the PM, $IFI_m$ is determined based on the metabolic body weight (BW), which is calculated using the coefficient of 106 and exponent of 0.75. Two simulation studies were conducted to test the hypothesis that the use of different coefficients and exponents for metabolic BW to calculate $IFI_m$ improves the accuracy of the estimates of IFI for pigs, and that PM is applied to pigs fed in group-housing systems. The accuracy of prediction represented by difference between actual and estimated IFI was compared using PM, ratio (RM), or averaging method (AM). In simulation studies 1 and 2, the PM estimated IFI better than the AM and RM during most of the periods (p<0.05). The use of 0.60 as the exponent and the coefficient of 197 to calculate metabolic BW did not improve the accuracy of the IFI estimates in both simulation studies 1 and 2. The results imply that the use of $197kcal{\times}kg\;BW^{0.60}$ as metabolizable energy for maintenance in PM does not improve the accuracy of IFI estimations compared with the use of $106kcal{\times}kg\;BW^{0.75}$ and that the PM estimates the IFI of pigs with greater accuracy compared with the averaging or ratio methods in group-housing systems.

• The Journal of Advanced Prosthodontics
• /
• 제14권5호
• /
• pp.315-323
• /
• 2022

PURPOSE. The purpose of this study was to investigate the effect of barium silicate filler contents on mechanical properties of resin nanoceramics (RNCs) for additive manufacturing (AM). MATERIALS AND METHODS. Additively manufactured RNC specimens were divided into 4 groups depending on the content of ceramic fillers and polymers: 0% barium silicate and 100% polymer (B0/P10, control group); 50% barium silicate and 50% polymer (B5/P5); 60% barium silicate and 40% polymer (B6/P4); 67% barium silicate and 33% polymer (B6.7/P3.3). The compressive strength (n = 15) and fracture toughness (n = 12) of the specimens were measured, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses were performed. Independent sample Kruskal-Wallis tests were performed on the compressive strength and fracture toughness test results, and the significance of each group was analyzed at the 95% confidence interval through post-tests using the Bonferroni's method. RESULTS. B6/P4 and B6.7/P3.3 exhibited much higher yield strength than B0/P10 and B5/P5 (P < .05). Compared to the control group (B0/P10), the other three groups exhibited higher ultimate strength (P < .05). The fracture toughness of B6/P4 and B6.7/P3.3 were similar (P > .05). The content of barium silicate and fracture toughness showed a positive correlation coefficient (R = 0.582). SEM and EDS analyses revealed the presence of an oval-shaped ceramic aggregate in B6/P4 specimens, whereas the ceramic filler and polymer substrate were homogeneously mixed in B6.7/P3.3. CONCLUSION. Increasing the ceramic filler content improves the mechanical properties, but it can be accompanied by a decrease in the flowability and the homogeneity of the slurry.

• 음성과학
• /
• 제9권4호
• /
• pp.27-38
• /
• 2002

The purpose of this article is to present the acoustic parameters (VOT, jitter, shimmer, vF0, vAm, NHR, SPI, VTI, DVB, DSH) for consonants (/pipi/, /$p^{h}ip^{h}i$/, /p'ip'i/) and sustained vowels (/a/, /e/, /i/) produced by normal subjects and dysphonia patients at two vocal effort(normal, high) by Lombard effect using 60dB white noise. Lombard effect indicates the vocal effort increase in noisy situation. At normal vocal effort, in general the acoustic parameter values of patients are greater than normal. And in noisy situation, significant decrease of acoustic values is seen in normal compared with in dysphonia patients. The clinical implication of this finding, the vocal quality in dysphonia is not compensated by vocal effort as well as normal subjects because of the inefficiency caused by abnormal vocal fold appearance and function. And with this result, we can counsel that the voice quality can not be improved as well as the patient expect.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1030-1033
• /
• 2003

This paper presents the deposition characterization of polycrystalline silicon films by the HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}C$ (Tf), 30 mTorr and $2{\sim}12%$ for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1592-1594
• /
• 2003

This paper presents the deposition and characterization of microcrystalline silicon(${\mu}c$-Si:H) films by HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SC:SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}(T_f)$, 30 mTorr and $2{\sim}12%$(SC) for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• 한국식물병리학회지
• /
• 제1권1호
• /
• pp.33-37
• /
• 1985

황록색줄무늬모자익과 줄기 정단부가 구부러지는 증상을 보이는 대두 이병주를 채집하여 지표식물검정, 충매전염, 물리적 성질 조사, 항혈청검정 및 전자현미경검경을 하였다. 지표식물검정결과 T. expansa와 Scotia에 국부병반반응, 동부, 완두, 명아주 등에 전신감염 증상을 일으켰다. 복숭아혹진딧물에 의한 전염율은 $90\%$였다. 물리적 성질은 내열성이 $60^{\circ}C$, 내희석성이 1,000배였고, 내보존성이 2일이었다. 바이러스를 순화하여 항혈청제조결과 1:1024의 역가를 보였으며 일본 바이러스연구소에서 분양 받고 AMV 항혈청과 양성반응을 보였다. 전자현미경검경 결과 대부분 길이가 60nm인 박테리아 모양의 바이러스 입자가 검경되었다.

• 한국조리학회지
• /
• 제18권5호
• /
• pp.279-292
• /
• 2012

본 연구는 동결로 건조한 자색고구마 가루를 첨가하여 국수를 제조하고 안토시아닌 함량과 항산화 활성도 및 품질특성을 검토하여 국수 제조 시 최적의 비율을 연구하고자 하였다. 색도는 자색고구마 분말 첨가량이 증가 할수록 명도(L)와 황색도(b)는 대조군에 비해 점차 감소하는 경향이 나타났고 적색도(a)는 첨가량이 증가 할수록 확연히 증가하였다. 안토시아닌 함량은 99.62, 항산화 활성도는 94.60로 비교적 우수한 것으로 나타났다. 조리한 국수의 기계적 성질은 견고성, 응집성 및 씹힘성은 첨가량이 증가 할수록 감소하는 경향을 보였으며 탄력성과 점착성에서 유의적 차이를 확인할 수 있었다. 관능적 품질 평가에서는 색, 향미, 맛과 씹힘성 및 전반적 기호도에서 6% 첨가군이 가장 높게 평가되었으며 안토시아닌 함량과 DPPH 라디컬 소거 활성에서 우수한 결과로 나타나 품질 특성과 관능검사에서 긍정적으로 평가된 6% 첨가군이 국수 제조 시 가장 알맞은 첨가 비율로 사료된다.

• 수산해양기술연구
• /
• 제60권3호
• /
• pp.277-289
• /
• 2024

Climate change has led to a significant increase in jellyfish populations globally, causing various problems. For power plants that use nearby seawater for cooling, the intrusion of jellyfish into intake systems can block the flow, leading to reduced output or even shutdowns. This issue is compounded by other small marine organisms like shrimp and salps, making it urgent to develop solutions to prevent their intrusion. This study addressed the problem using the BioSonics DT-X 120 kHz scientific fish finder to conduct preliminary tank experiments. We also deployed underwater acoustic and camera buoys around the intake of nuclear power plant, utilizing a bidirectional communication system between sea and land to collect data. Data collection took place from July 31, 2023 to August 1, 2023. While harmful organisms such as jellyfish and salps were not detected, we successfully gathered acoustic data on small fish measuring backscattering strength (SV). Analysis showed that fish schools were more prominent in the evening than during the day. The highest fish distribution was observed at 3:30 AM on July 31 with an SV of -44.8 dB while the lowest was at 12:30 PM on the same day with an SV of -63.4 dB. Additionally, a solar-powered system was used to enable real-time data acquisition from sea buoys with smooth communication between the land server and the offshore buoy located 1.8 km away. This research developed an acoustic-based monitoring system for detecting harmful organisms around the intake and provided foundational data for preventing marine organism intrusion and planning effective measures.

• Mycobiology
• /
• 제33권1호
• /
• pp.51-60
• /
• 2005

Pot greenhouse experiments were carried out to attempt to increase the salinity tolerance of one of the most popular legume of the world; cowpea; by using dual inoculation of an Am fungus Glomus clarum and a nitrogen-fixer Azospirillum brasilense. The effect of these beneficial microbes, as single- or dual inoculation-treatments, was assessed in sterilized loamy sand soil at five NaCl levels ($0.0{\sim}7.\;2ds/m$) in irrigating water. The results of this study revealed that percentage of mycorrhizal infection, plant height, dry weight, nodule number, protein content, nitrogenase and phosphatase activities, as well as nutrient elements N, P, K, Ca, Mg were significantly decreased by increasing salinity level in non-mycorrhized plants in absence of NFB. Plants inoculated with NFB showed higher nodule numbers, protein content, nitrogen concentration and nitrogenase activities than those of non-inoculated at all salinity levels. Mycorrhized plants exhibited better improvement in all measurements than that of non-mycorrhized ones at all salinity levels, especially, in the presence of NFB. The concentration of $Na^+$ was significantly accumulated in cowpea plants by rising salinity except in shoots of mycorrhizal plants which had $K^+/Na^+$ ratios higher than other treatments. This study indicated that dual inoculation with Am fungi and N-fixer Azospirillum can support both needs for N and P, excess of NaCl and will be useful in terms of soil recovery in saline area.