• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.781-796
• /
• 2015

This study was carried out to investigate the effect of no-tillage and split irrigation on the growth of pepper plant under green house condition in Jeonnam province. Moisture content of soil at whole quantity irrigation in tillage was increased rapidly regardless of soil depth for initial irrigation and then was decreased continuously until next irrigation. Deviation of moisture content in soil was decreased with increasing depth of soil. Moisture contents of top soil and subsoil (20 cm) at whole quantity irrigation in no-tillage were increased with sunrise, and then decreased with sunset. Moisture contents of top soil in tillage, and top soil and subsoil (20 cm) in no-tillage at half quantity irrigation indicated a cyclic diurnal variation by evapotranspiration. Salinity of soil was increased after initial irrigation and then was decreased continuously until next irrigation. With increasing depth of soil, increases of salinity in soil was delayed. Salinity of top soil in no-tillage was increased between AM 11:00 and AM 12:00, and then showed the highest level between PM 2:00 and PM 6:00 on a cyclic diurnal variation by evapotranspiration. Salinity of subsoil (30 cm) in no-tillage was not measured a cyclic diurnal variation. Moisture content and salinity of soil was positive correlation regardless of tillage and no-tillage cultivation. Growth of pepper in no-tillage cultivation was higher than that in tillage cultivation. Main branch Length and stem diameter of half quantity irrigation plot was higher than that of whole quantity irrigation plot regardless of tillage and no-tillage cultivation. After harvesting, the number of pepper fruits of half quantity irrigation plot was increased remarkably by 49% and 47%, in tillage and no-tillage cultivation, respectively. Pepper yield of no-tillage cultivation plot was higher by 8% than that of tillage cultivation plot. Pepper yield of half quantity irrigation plot was increased remarkably by 36% and 39%, in tillage and no-tillage cultivation, respectively.

• Korean Journal of Veterinary Research
• /
• v.44 no.2
• /
• pp.217-224
• /
• 2004

This study was carried out to investigate the antibiotic resistance pattern of Listeria spp. and Staphylococcus aureus. A total of 17 (14.8%) L. monocytogenes, 13 (11.3%) L. innocua, 7 (7%) L. welshimeri, and 83 (72.2%) S. aureus were isolated from commercial poultry carcasses in Seoul and Kyonggi province during the period between 2001 and 2003. Antibiotic susceptibility test of all Listeria strains isolated was performed by the disk agar diffusion method. Antibiotics used in the study were as follows; Amikacin (An), Ampicillin (Am), Cephalothin (Cf), Chloramphenicol (C), Ciprofloxacin (Cip), Erythromycin (E), Gentamicin (Gm), Imipenem (Ipm), Kanamycin (K), Minocycline (Mi), Neomycin (N), Norfloxacin (Nor), Ofloxacin (Ofx), Penicillin (P), Streptomycin (S), Tetracycline (Te), Tobramycin (Nn), Trimethoprim (Tmp), Trimethoprim/Sulfamethoxazloe (Sxt), and Vancomycin (Va). The antibiotic resistance pattern of S. aureus isolates was performed by the disk agar diffusion method. For the latter program, antibiotics used to the study were as follows; Cf, C, Cip, Clindamycin (Cc), E, Gm, Ipm, Nafcillin (Nf), Oxacillin (Ox), P, Te, Sxt, and Va. Of the 17 L. monocytogenes isolates, 94.1% were resistant to Te, 88.2% to Mi, 11.8% to Nor, 11.8% to S, 5.9% to Cip, and 5.9% to C. Of 13 L. innocua, 53.8% were resistant to Te, 23.1% to Mi, 23.1% to S, 7.7% to Cip, and 7.7% to Nor. Of 7 L. welshimeri, 57.1% were resistant to Te, and 14.3% to Am. Of 83 S. aureus, 100% were resistant to Te, 86.7% to Gm, 34.9% to P, 15.7% to Cip, 12% to Cc, 9.6% to E. The multiple antibiotic resistance patterns of L. monocytogenes isolates were observed in Te Mi Cip (5.9%), Te Mi Nor (5.9%), Te Mi (76.5%), and Te Nor (5.9%). Multiple antibiotic resistance was also found in L. innocua isolates. Resistant to Te Mi S Cip Nor was 7.7%, Te Mi S (7.7%), Te Mi (7.7%), and was 7.7% to Te S. Antibiotic resistance patterns for S. aureus isolats were demonstrated to Te Gm P Cip Cc E (6.0%), Te Gm Cip Cc E (3.6%), Te Gm P Cc (1.2%), Te Gm P (15.6%), Te Gm Cip (2.4%), Te P Cip (2.4%), Te Gm Cc (1.2%), Te Gm (56.6%), Te P (9.6%), and to Te Cip (1.2%). The results of this study suggest a high incidence of Lsteria spp. and S. aureus on poultry carcasses. The contaminated poultry carcasses may be a potential vehicle for foodborne infections due to multiple antimicrobial resistant organisms.

• Parasites, Hosts and Diseases
• /
• v.24 no.1
• /
• pp.42-48
• /
• 1986

As a series of systematic classification of paramphistomes, in the first step, paramphistomes in the lumen and reticulum were collected on 170 Korean catties (2∼3 years age, male) slaughtered at Jeonju abattoir from July, 1984 to September, 1985 and were classified by means of morphology of the worms. Afterwards, the karyotype of Paramphistomum explanatum (Creplin, 1849) which is the common in Korean cattle was detected by means of modified air-drying method from testis cells of the worm. The following is a brief summary of the leading facts gained through the experiment. 1. Most of the cattle slaughtered at the abattoir were infected with paramphistomes. The 5 species of the worms were detected on 170 Korean cattle and the worm burden per head was from 2 to 784(on the average 170) worms, 120(70.59%) heads out of them involving 2∼100 worms. In 28,900 individuals of paramphistomes obtained on 170 Korean cattle, appearance rates of various worms were as follows : 49.74% in P. explanatum, 48.08% in P. cervi, 0.98% in Orthocoelium orthocoelium, 0.89% in Fischoederius cobboldi and 0.14% in Cotylophoron cotylcphorum. 2. The chromosome number of 620 P. explanatum in the haploid and diploid cells was n=9 and 2n=18, and abundant cells in meiotic division were observed; 1,420 haploid and 38 diploid cells were reliable. Nine pairs of mitotic chromosomes were homologous and the chromosomes were composed of aye medium-sized metacentrics(m), subtelocentrics(st) or submetacentrics(sm) and four smallsized subtelocentrics(st) or submetacentrics(am), while meiotic metaphase chromosomes were composed of five medium and four small-sized. 3. The haploid of the testis cells showed C-band in the centromeric region from 8 of them, whereas the remaining chromosome No. 5 included heterochromatin on the tip region, and chromosomes No. 3 and No. 7 showed a remarkable C-band distinguished from other chromosomes.

• Journal of the Korean Magnetics Society
• /
• v.12 no.6
• /
• pp.231-234
• /
• 2002

Magnetic properties are investigated for top- and bottom-type spin valves of Si/SiO$_2$/NiO(60nm)/Co(2.5nm)/Cu(1.95nm)/Co(4.5nm)/NOL(t nm; Nano Oxide layer). The MR ratios of the bottom-type spin valves with NOL are larger than those of the top-type spin valves. However, the enhancement of the former is lower than the latter. Both of spin-valves also showed almost constant Ap and smaller p. Enhanced MR ratios of spin valves with NOL result mainly from small values of with constant Ap which due to specular diffusive electron scattering at NOL(NiO)/metal interfaces.

• Korean Journal of Ichthyology
• /
• v.26 no.1
• /
• pp.11-16
• /
• 2014

The best spawning timing in a day and the first spawning position of Pseudopungtungia nigra was investigated at the Jujacheon stream in Jinan-gun Jeollabuk-do, Koera from May to July 2009. P. nigra spawned only at the nest of Coreoperca herzi from 7 May to 11 July, 2009. P. nigra spawned at 56 nests among 61 nests of C. herzi, and the spawning of P. nigra started on after 1st or 2nd day spawning of C. herzi. The spawning behavior was dominantly observed at around 06:00 to 07:00 AM, when parental C. herzi males are usually inactive in the territorial defence. The hatching rate of P. nigra eggs was closely related with the parental activity of the guarding C. herzi, and P. nigra deposit their eggs as close as possible to the egg clutches of C. herzi (normally at the perimeter of the clutch), likely to take much of the potential effects from fanning and guarding, as the hosts focus their care on the centre of the egg clutch.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.203-207
• /
• 2017

A homogeneous $KNbO_3$ (KN) phase was formed by sintering at $1,040^{\circ}C$ for 1 hour, without formation of the $K_2O$-deficient secondary phase even though suffering the minor loss of $K_2O$. KN liquid phase was formed during sintering and abnormal grain growth occurred in this specimen. The detailed microstructural observations on KN during sintering were carried out using high resolution transmission electron microscopy. The ledged structures were found at the KN grain boundary and the abnormal grain growth was performed by the lateral migration of these ledges in the presence of the liquid phase. The liquid pockets were found in the KN grains. They have various external shapes mainly due to the kinetic factors. They have atomically flat interfaces with some ledges with one atomic height. The slight deficient $K_2O$ by evaporation might somewhat reduce the melting point of KN from the reported at $1,058^{\circ}C$. The liquid pockets play an important role in supplying the liquid phase during the abnormal grain growth in the sintering process of KN ceramics.

• Journal of Acupuncture Research
• /
• v.20 no.6
• /
• pp.168-181
• /
• 2003

Objective: The neuroanatomical studies on the acupoints(Waiguan(SJ5), Neiguan(Pe6), Sanyinjiao(SP6) and Xuanzhong(GB39)) projecting to the brain area related to dimentia using the pseudorabies virus (PRV-Ba strain) in the mouse was described. Methods: The common locations of the brain projecting to the Waiguan, Neiguan, Sanyinjiao and Xuanzhong following injection of PRV-Ba were histochemically observed. The results were as follows Results : 1. PRV-Ba labeled areas in medulla oblongata, pons and midbrain were similar to 4 acupoints, theses areas were related to autonomic center. 2. PRV-Ba labeled areas in diencephalon and cebrebrum were differently labeled according to the acupoints. 3. CNS labeled areas in Waiguan were dense labeled in CA1-3 area of hippocampus, amygdaloid nucleus, insular cortex, parietal cortex, entorhinal cortex, perirhinal cortex, dorsal endopiriform cortex, piriform cortex, amygdalopiriform transition and bed n. of stria terminalis. 4. CNS labeled areas in Neiguan were dense labeled in insular cortex, amygdaloid nucleus, parietal cortex, entorhinal cortex, perirhinal cortex, dorsal endopiriform cortex, piriform cortex, amygdalopiriform transition and bed n. of stria terminalis. 5. CNS labeled areas in Sanyinjiao were dense labeled in CA1-3 of hippocampus, suprachiasmatic n., dorsal endopiriform cortex, piriform cortex and bed n. of stria terminalis. 6. CNS labeled areas in Xuanzhong were dense labeled in suprachiasmatic n., dorsal endopiriform cortex and piriform cortex. Conclusions : Following these results, labeled acupoints in brain areas related to dimentia are Waiguan and Neiguan. Common labeled areas are amygdaloid n., entorhinal cortex, amygdaopiriform transition, bed n. stria terminalis and perirhinal cortex.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.197.2-197.2
• /
• 2015

Low-cost, high efficiency solar cells are tremendous interests for the realization of a renewable and clean energy source. ZnTe based solar cells have a possibility of high efficiency with formation of an intermediated energy band structure by impurity doping. In this work, the ZnTe:O/CdS/ZnO structure was fabricated by pulsed laser deposition (PLD) technique. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnTe target, whose density of laser energy was 4.5 J/cm2. The base pressure of the chamber was kept at a pressure of approximately $4{\times}10-7Torr$. ZnO thin film with thickness of 100 nm was grown on to ITO/glass, and then CdS and ZnTe:O thin film were grown on ZnO thin film. Thickness of CdS and ZnTe:O were 50 nm and 500 nm, respectively. During deposition of ZnTe:O films, O2 gas was introduced from 1 to 20 mTorr. For fabricating ZnTe:O/CdS/ZnO solar cells, Au metal was deposited on the ITO film and ZnTe:O by thermal evaporation method. From the fabricated ZnTe:O/CdS/ZnO solar cell, current-voltage characteristics was measured by using HP 4156-a semiconductor parameter analyzer. Finally, solar cell performance was measured using an Air Mass 1.5 Global (AM 1.5 G) solar simulator with an irradiation intensity of 100 mW cm-2.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.2-111.2
• /
• 2015

Typical electrodes (metal or indium tin oxide (ITO)), which were used in conventional organic light emitting devices (OLEDs) structure, have transparency and conductivity, but, it is not suitable as the electrode of the flexible OLEDs (f-OLEDs) due to its brittle property. Although Graphene is the most well-known alternative material for conventional electrode because of present electrode properties as well as flexibility, its carrier injection barrier is comparatively high to use as electrode. In this work, we performed plasma treatment on the graphene surface and alkali metal doping in the organic materials to study for its possibility as anode and cathode, respectively. By using Ultraviolet Photoemission Spectroscopy (UPS), we investigated the interfaces of modified graphene. The plasma treatment is generated by various gas types such as O2 and Ar, to increase the work function of the graphene film. Also, for co-deposition of organic film to do alkali metal doping, we used three different organic materials which are BMPYPB (1,3-Bis(3,5-di-pyrid-3-yl-phenyl)benzene), TMPYPB (1,3,5-Tri[(3-pyridyl)-phen-3-yl]benzene), and 3TPYMB (Tris(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane)). They are well known for ETL materials in OLEDs. From these results, we found that graphene work function can be tuned to overcome the weakness of graphene induced carrier injection barrier, when the interface was treated with plasma (alkali metal) through the value of hole (electron) injection barrier is reduced about 1 eV.