• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.820-823
• /
• 2005

개인의 경험을 통해 얻어지는 외부의 물리적 자극에 대한 복합적인 감성을 분석하여 공학적으로 처리함으로서 인간의 보다 편리하고 안락한 생활을 영위하도록 하는 연구가 진행되고 있다. 색채는 아동의 감성과 성격을 이해할 수 있는 중요한 요소이다. 또한 아동은 자신의 심리 상태나 갈등을 그리기나 낙서 등의 작업을 통해서 아동의 감성을 무의식적으로 표출하는 경우가 많다. 따라서 아동이 선호하는 색채를 통해 아동의 감성상태를 파악할 수 있다. 본 논문에서는 인간의 오감 즉, 시각, 청각, 후각, 미각, 촉각 중에서 시각(색채)에 따른 감성 상태를 파악하기 위하여 아동이 그린 그림의 색채를 분석한다. 그리고 퍼지 논리와 퍼지 추론 규칙을 적용하여 감성 상태를 파악하는 방법을 제안한다. 제안된 감성 처리 방법을 알슈울러와 해트윅(Alschuler and Hattwick)과 박재명의 색채에 따른 감성 상태에 적용한 결과, 제안된 감성 처리 방법이 효율적인 것을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1592-1594
• /
• 2003

This paper presents the deposition and characterization of microcrystalline silicon(${\mu}c$-Si:H) films by HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SC:SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}(T_f)$, 30 mTorr and $2{\sim}12%$(SC) for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1595-1597
• /
• 2003

This paper presents the deposition of ${\mu}c$-Si:H thin-film and fabrication of a solar cell by VHF-PECVD method. The ${\mu}c$-Si:H thin films and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from ${\mu}c$-Si:H thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, Solar cell characteristic was measured under AM1.5 illumination.

• Applied Microscopy
• /
• v.44 no.4
• /
• pp.111-116
• /
• 2014

This study investigates the developmental pattern of adhesive discs (ADs) to highlight the ontogeny and structural changes that occur during the growth of Boston ivy. Initiation to postmortem features of ADs were examined through light and scanning electron microscopy. The study also reveals a new finding of the dislocation of peripheral tissues of adaxial origin. Four phases of attachment are suggested with regards to its climbing behavior: 1) pre-attachment, 2) upon attachment, 3) after attachment, and 4) final attachment. During initiation, several ADs originate from tendril primordia without epidermal differentiation. However, different growth rates in the epidermis results in completely different ADs. ADs were discerned by size, shape, and color during expansion, but cells in the adaxial surface remained alive longer than the other side. Upon contact, the ADs demonstrate simultaneous growth and deterioration, but once attachment is established the latter process subdues to final stages. Epidermal transformation, adhesive secretion, cellular disruption, and mechanical stress were essential for the self-clinging nature of Boston ivy. The post-attachment sequence is also believed to be critical in achieving maximum mechanical strength to provide extensive support. The developmental process of ADs is prompted by tactile stimulation but in a highly organized and systematic manner.

• Journal of Conservation Science
• /
• v.6 no.1 s.7
• /
• pp.71-78
• /
• 1997

Oil painting shows a wide variety of damages due to differentcohesiveness between materials and different responses to temperature and humidity. The deforming flatness of canvas is a major cause of deterioration. The heat, pressure and moisture, and classical materials which had been traditionally used to correct the deformation of supports have caused damages to the paintings. In modern restoration of paintings, new methods have been developed to avoid the use of such potentially harmful elements. In this paper the correcting of deformed support with the use of low-pressure table, deformation correction frame and new materials, which has been developed both to protect the works and to maximize the effect of restoration.

• Applied Microscopy
• /
• v.45 no.3
• /
• pp.177-182
• /
• 2015

The boiler tubes of X20CrMoV12.1 used in fossil-fired power plants were obtained and analyzed for the effect of water treatment on the steam corrosion-induced oxide scale in an effort to better understand the oxide formation mechanism, as well as pertinent method of maintenance and lifetime extension. The specimens were analyzed using various microscopy and microanalysis techniques, with focuses on the effect of water treatment on the characters of scale. X-ray diffraction analysis showed that the scales of specimens were composed of hematite ($Fe_2O_3$), magnetite ($Fe_3O_4$), and chromite ($FeCr_2O_4$). Electron backscatter diffraction analysis showed that the oxides were present in the following order on the matrix: outer $Fe_2O_3$, intermediate $Fe_3O_4$, and inner $FeCr_2O_4$. After all volatile treatment or oxygenated treatment, a dense protective $Fe_2O_3$ layer was formed on the $Fe_3O_4$ layer of the specimen, retarding further progression of corrosion.

• Applied Microscopy
• /
• v.45 no.3
• /
• pp.155-169
• /
• 2015

Plastic deformation was introduced to the austenitic (${\gamma}$) stainless steel of SS304 by air blast shot peening, ultrasonic shot peening, and ultrasonic nanocrystalline surface modification. Various deformation structures were formed. The hardness, the deformation structure and the underlying grain refinement mechanism were investigated. In the deformed region, planar dislocation arrays and deformation twin (DT), the DT-DT intersection and ${\varepsilon}$-martensite structures, and ${\alpha}^{\prime}$-martensite were formed in the respective regions of low, medium, and high strain. The grain refinement mechanism is found to be closely related to the 1) sub-division of coarse grains by DT, shear bands and their intersection, and 2) formation of nano-sized ${\alpha}^{\prime}$-martensite due to the high plastic deformation.

• Journal of the Korean Society of Combustion
• /
• v.9 no.1
• /
• pp.25-31
• /
• 2004

Various types of the air/fuel pre-mixer have been designed and tested to investigate the combustion characteristics of the lean-premixed gas turbine combustor, such as NO emission and flame stability. One type of the pre-mixers has been selected and installed to a 70 kW lean-premixed gas turbine combustor. The concentrations of CO and NO were measured with varying equivalence ratios in the combustion chamber at ambient pressure. The result shows that the emissions of CO and NO are heavily affected by the shape of the pre-mixer. The NO and CO emissions decreased, as the mixing ratio of air and fuel increased. In addition, the NO emission of the lean-premixed low NOx combustor is more dependent on the equivalence ratio than that of the conventional combustor.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.432-436
• /
• 2007

e-AIRS(e-Science Aerospace Integrated Research System)는 항공 우주 분야의 e-Science[1]를 제공하여 복잡한 문제를 해결하고 협력적인 연구 지원하기 위해 사용자 기반의 통합적 비교 환경을 구축하였다. e-AIRS에서는 CFD(Computational Fluid Dynamics)[2] 시뮬레이션 서비스 및 원격 실험 서비스를 제공하고 이 서비스들에서 도출된 결과 데이터에 대해 비교, 분석할 수 있는 환경을 제공한다. 사용자가 시뮬레이션 데이터와 실험 데이터를 비교 하여 오차가 큰 케이스에 대해 계산하고자 할 때, 계산 범위와 그에 따른 환경 값을 설정하면, 자동적으로 서브 케이스를 생성하여 계산함으로써 사용자에게 한 번의 실험으로 다양한 결과를 분석할 수 있는 연구 환경을 제공한다. 또한 연구자간 비교, 협력 환경을 지원하기 위해 사용자간에 협업 환경을 구성하고 기존의 시각적 데이터 공유 환경을 보완하여 연구자간 데이터 공유가 가능한 회의 환경을 제공하였다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.667-669
• /
• 2003

A bio-optical model was developed specific for turbid and shallow waters. Special studies were carried out to estimate absorption and scattering properties as well as backscattering probability of suspended matter. The inversion of bio-optical model allows for direct retrieval of turbidity and chlorophyll- a from the visible-near infrared (VNIR) range sensor. Time-series satellite imagery from ASTER AM-1 sensor, were used to monitor the Laguna de Bay water quality condition. Spatial distribution of temperature for the lake was extracted from the thermal infrared (TIR) sensor. Corresponding field surveys were conducted to parameterize the bio -optical model. In-situ measurements include suspended particle and chlorophyll-a concentrations profiles from nephelometric devices and processing of water samples. Hyperspectral measurements were used to validate results of the bio -optical model and satellite- based estimation. This study provides a theoretical basis and a practical illustration of applying space- based measurements on an operational basis.