• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.119-125
• /
• 2005

The current automotive is seeking the improvement of performance, the prevention of environmental pollution and the saving of energy resources according to miniaturization and lightweight of the components. And the variance analysis on the basis of structure analysis and DOE is applied to the lower control am. We have proposed a statistical design model to evaluate the effect of structural modification by performing the practical multi-objective optimization considering weight, stress and fatigue lift. The lower control arm is performed the fatigue analysis using the load history of real road test. The design model is determined using the optimization of acquired load history with the fatigue characteristic. The characteristic function is made use of the optimization according to fatigue characteristics to consider constrained function in the optimization of DOE. The structure optimization of a lower control arm according to fatigue characteristics is performed. And the optimized design variable is D=47 m, T=36mm, W=12 mm. In the real engineering problem of considering many objective functions, the multi-objective optimization process using the mathematical programming and the characteristic function is derived an useful design solution.

• Applied Microscopy
• /
• v.43 no.4
• /
• pp.173-176
• /
• 2013

The oxidation behavior of the crystallized $Al_{87}Ni_3Y_{10}$ alloy has been investigated with an aim to compare with that of the amorphous $Al_{87}Ni_3Y_{10}$ alloy. The oxidation at 873 K occurs as follows: (1) growth of an amorphous aluminum-yttrium oxide layer (~10 nm) after heating up to 873 K; and (2) formation of $YAlO_3$ crystalline oxide (~220 nm) after annealing for 30 hours at 873 K. Such an overall oxidation step indicates that the oxidation behavior in the crystallized $Al_{87}Ni_3Y_{10}$ alloy occurs in the same way as in the amorphous $Al_{87}Ni_3Y_{10}$ alloy. The simultaneous presence of aluminum and yttrium in the oxide layer significantly enhances the thermal stability of the amorphous structure in the oxide phase. Since the structure of aluminum-yttrium oxide is dense due to the large difference in ionic radius between aluminum and yttrium ions, the diffusion of oxygen ion through the amorphous oxide layer is limited thus stabilizing the amorphous structure of the oxide phase.

• Applied Microscopy
• /
• v.47 no.4
• /
• pp.238-241
• /
• 2017

A study on the visual cell and eyeball of the endemic Korean species Liobagrus mediadiposalis was investigated by light and electron microscopes. The retina of a small and 2 mm-diameter round eye was thin, $151.0{\pm}4.0{\mu}m$ and has two visual cells, a single cone and a rod cell. The single cone cells are short and thick, $18.0{\pm}0.9{\mu}m$ in length and $5.1{\pm}0.7{\mu}m$ (n=30) in diameter, while the rod cells are longer and thinner, $54.8{\pm}2.9{\mu}m$ in length and $3.3{\pm}0.6{\mu}m$ in diameter. The cone cells are seen an irregular and random mosaic pattern, and the rod cells are also randomly situated at between cone cells. As a rare phenomenon, such structure is one of characteristics reflecting the eye of a nocturnal and bottom-dwelling freshwater fish. The ultrastructure of visual cells was observed with scanning and transmission electron microscopy, both cone and rod cells are divided into an inner segment with numerous mitochondria and an outer segment with stacks of membrane discs.

• Korean System Dynamics Review
• /
• v.11 no.3
• /
• pp.33-59
• /
• 2010

South Korea has the defense burdensharing agreement with the United States in reference to the U.S. troops stationed in Korea since 1991, based on Special Measure Agreement(SMA). Due to the growth of Korea's economic power and the U.S. provision of the security environment on Korean penninsula, the U.S. government steadily demanded the rise of contributions to common defense from South Korea and South Korea accepted most of the U.S. requests without proper principles of negotiation concerning the cost sharing. This paper analyzes the systems of the Korea－U.S. cost sharing program through a systems thinking, that yields desirable results with a little effort. The three policy leverages are: 1) the development of negotiation principles; 2) the policy making closely linked with National Defense Reform Basic Plan; 3) the policy making with responsibility burdensharing than cost burdensharing. This paper findings will contribute to the developing the Korea－U.S. cost sharing program by providing policy－makers and policy-practitioners with systematic understanding and insight into the dynamics of the program. Also, this will enable the program to execute more effectively with a concrete formula.

• Applied Microscopy
• /
• v.44 no.3
• /
• pp.96-99
• /
• 2014

Study on the egg envelope of an endemic Korean freshwater fish, Coreoleuciscus splendidus was carried out by light and scanning electron microscopes during its spawning season. The egg envelope on the entire egg is filled with plenty of long cylinder-like villi before and after fertilization. The fertilized eggs consist of two regions, the attaching and non-attaching parts to stick to the substrates. The villi covering the fertilized eggs have three kinds of villi in its length: 1) normal- sized villi of an average of $10.6{\mu}m$ on the non-attachment part; 2) longer and more slender villi over about $20{\mu}m$ on the attachment part, at least being two times longer than those of the non-attachment; and 3) shorter villi under about $5.0{\mu}m$ around the micropyle, with half the size of the non-attachment villi. The micropyle rotated in a counter-clockwise direction with five pieces of the ridges.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.62-70
• /
• 1988

This study was conducted to solve the problems for the unsuitable parameters and the uncertainty of design flood can be appeared by low outliers were inclined to the lower part from the trend of the balance of the data. Derivation of reasonable design flood was attempted finally by modification of low outliers with analysis of flood frequency by means of Log Pearson Type Ill distribution. Three subwatersheds were selected as studying basins with the annual maximum series including low outliers along Geum River basin. The results through this study were analyzed and summarized as follows. 1. Log Pearson Type In distribution was confirmed as a reasonable one by X$^2$ goodness of fit test at Gong Ju, Gyu Am, og Cheon watershed along Geum River basin. 2. Probable flood flows for each watershed were derivated by flood frequency curve with outliers. 3. Weighted skew coefficient for each watershed was calculated for the evaluation of freq- uency factor which is needed for the modification of low outlier. 4. It was confirrned that adjusted frequency curve has a lower tendency than that of deletion of low outlier in common at all watersheds. 5. Final probable flood flows were derivated by modification with evaluation of modified basic statistics for three watersheds. 6. In comparison with a frequency curve with modification and one with outlier, The former has a higher probable flood flow within three years of return periods than that of the latter, and vice versa over three years of return periods.

• The Journal of Natural Sciences
• /
• v.19 no.1
• /
• pp.95-111
• /
• 2008

This paper aims to discussion the characteristics of location and spatial organization on the Donam SeoWon(confucian academy). To do this, we studied in analysis of the present conditions and photographing, research materials about the from of physical structure and review of historical documents. The result of analysis in the sight of the location and spatial organization was good matched. The spatial organization of the Donam SeoWon(confucian academy) was divided into entry space, lecturing space, management space and sacrificial space. Jonhakhumyo constructs axis of “Sanangru - Ipdeokmun - Yangseongdang - Naesammun - Sungryesa” and Eungdodang that not removed hall with 1880 shows characteristics a right angle in the left side of axis remove to location of present 1971. The result of this study, analysis of axis and Spatial structure shows backgrounds of these locations shows that the political and social, economical phenomena were influenced to the locations and spatial organization of the Donam SeoWon(confucian academy).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.371-371
• /
• 2011

태양전지에 대한 관심과 수요가 증가함에 따라 태양전지의 대면적화 및 저가 생산을 위한 유기태양전지에 대한 연구가 활발히 진행되고 있다. 유기태양전지의 대면적화는 현재의 태양전지 시장을 대체하기 위한 중요한 요소 중 하나이다. 기존의 유기태양전지는 주로 스핀코팅법에 의해 제작 되었으나 대면적화 및 유연성 박막 제조 시 공정상 어려움이 있기 때문에 스핀코팅을 대체할 새로운 제조 방법이 개발되고 있다. 그 중, 스프레이 공법을 적용한 유기태양전지 제조방법이 각광을 받고 있으며, 이에 대한 연구가 활발히 진행되고 있다. 본 연구는 유기태양전지 제작을 위하여 금속 전극을 제외한 전 공정 (N형 ZnO 층 -P3HT:PCBM 광흡수층-P형 PEDOT:PSS층)을 용액기반의 스프레이 코팅 공정을 적용하여 제작하였다. 스프레이 공정을 통해 코팅한 ZnO, 광활성 및 PEDOT:PSS 박막의 경우, 각각의 표면거칠기는 스핀코팅에 의해 형성된 박막과 유사한 거칠기 값을 가졌다. 최적의 스프레이 공정을 통하여 ITO/ZnO/P3HT:PCBM/PEDOT:PSS/Ag의 구조를 가지는 invert형 유기태양전지를 제작한 결과, AM 1.5G의 광원조건에서 2.95 %의 광변환 효율을 얻을 수 있었다. 이는 기존의 스핀코팅법으로 제작된 소자와 거의 비슷한 성능으로써 저가형□대면적 유기태양전지의 제작 가능성을 보여준 결과이다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1043-1046
• /
• 2013

Prediction of physicochemical properties of organic molecules is an important process in chemistry and chemical engineering. The MSEP approach developed in our lab calculates the molecular surface electrostatic potential (ESP) on van der Waals (vdW) surfaces of molecules. This approach includes geometry optimization and frequency calculation using hybrid density functional theory, B3LYP, at the 6-31G(d) basis set to find minima on the potential energy surface, and is known to give satisfactory QSPR results for various properties of organic molecules. However, this MSEP method is not applicable to screen large database because geometry optimization and frequency calculation require considerable computing time. To develop a fast but yet reliable approach, we have re-examined our previous work on organic molecules using two semi-empirical methods, AM1 and PM3. This new approach can be an efficient protocol in designing new molecules with improved properties.

• Solar Energy
• /
• v.5 no.2
• /
• pp.46-53
• /
• 1985

Hydrogenated amorphous silicon solar cells which are fabricated by photo-chemical vapor deposition (photo-CVD) system has been investigated. In the photo-CVD system which consists of three separate reaction chambers, low-pressure mercury lamp has been used as a light source. The main reactant ($Si_2H_6/He$) gases which are premixed with a small amount of mercury vapor in a mercury-vaporizer kept at $50^{\circ}C$ have been used. Using $C_2H_2$ and $SiH_2(CH_3)_2$ as the carbon source, p-type wide band gap a-SiC:H films have been obtained. The result has been found that the undoped layers of the pin/substrate solar cells are influenced by the residual impurities, such as phosphorus and boron during the deposition process. By minimizing the effect of the impurities in the i-layer and optimizing conditions at the p-layer and p/i interface, the energy conversion efficiency of 9.61 % under AM-1 ($100mW/Cm^2$) has been achieved for pin/substrate solar cells illuminated through their p-layers, using the three separate reaction chamber apparatus. It is expected that a-SiC:H solar cells with the energy conversion efficiency over 10% have been fabricated by Photo-CVD method.