• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1380-1385
• /
• 2020

An annular linear induction electromagnetic pump (ALIP) which has a developed pressure of 0.76 bar and a flow rate of 100 L/min is designed to analysis end effect which is main problem to use ALIP in thermohydraulic system of the prototype generation-IV sodium-cooled fast reactor (PGSFR). Because there is no moving part which is directly in contact with the liquid, such as the impeller of a mechanical pump, an ALIP is one of the best options for transporting sodium, considering the high temperature and reactivity of liquid sodium. For the analysis of an ALIP, some of the most important characteristics are the electromagnetic properties such as the magnetic field, current density, and the Lorentz force. These electromagnetic properties not only affect the performance of an ALIP, but they additionally influence the end effect. The end effect is caused by distortion to the electromagnetic field at both ends of an ALIP, influencing both the flow stability and developed pressure. The electromagnetic field distribution in an ALIP is analyzed in this study by solving Maxwell's equations and using numerical analysis.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.81-86
• /
• 1998

The light aggregates were fabricated by sintering green bodies made form the fly ash-clay alip. The content of fly ashes in the slip could be increased up to 70wt.% due to controlled rheological behavior of the slip, and the green body of uniform microstructure could be obtained by DCC(Direct Coagulation Casting)method. The apparent density, microstructure and compressive strength for sintered bodies fired at 1100∼1200$^{\circ}C$ were evaluated. The properties of light aggregates fabricated depend on slip density, particle behavior in the slip and sintering conditions. The sintered body prepared by firing a green body made from slip of density 1.60 at 1150$^{\circ}C$/2hr satisfied conditions of a light aggregate as apparent density of 1.49${\pm}$0.02 and compressive strength of 584${\pm}$62kg/$\textrm{cm}^2$.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.1-3
• /
• 1999

EM (ElectroMagnetic) pump is used for the purpose of transporting liquid sodium coolant with electrical conductivity in the LMR(Liquid Metal Reactor). (In the present study, pilot EM pump has been designed by using of equivalent circuit method which is commonly employed to analyze linear induction machines for the test of removal of residual heat. The length and diameter of the pump have fixed values of 840 mm and 101.6 mm each by taking account of geometrical size of circulation loop for the installation of EM pump. Flowrate versus developing pressure is related from Laithwaite's standard design formula and the characteristic analyses of developing force and efficiency are carried out according to change of input frequency. From the characteristic curve, input frequency of 13 Hz is determined as the design frequency. On the other hand, The annular air gap size of 6.05 mm is selected not to bring about too much hydraulic loss. Resultantly design analysis makes pump have the electrical input of 604 VA and the hydrodynamical capacity of 1.3 bars and 40 l/min.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.82-91
• /
• 2017

Liquid alloy systems have a high degree of thermal conductivity, far superior to ordinary nonmetallic liquids and inherent high densities and electrical conductivities. This results in the use of these materials for specific heat conducting and dissipation applications for the nuclear and space sectors. Uniquely, they can be used to conduct heat and electricity between nonmetallic and metallic surfaces. The motion of liquid metals in strong magnetic fields generally induces electric currents, which, while interacting with the magnetic field, produce electromagnetic forces. Electromagnetic pumps exploit the fact that liquid metals are conducting fluids capable of carrying currents, which is a source of electromagnetic fields useful for pumping and diagnostics. The coupling between the electromagnetics and thermo-fluid mechanical phenomena and the determination of its geometry and electrical configuration, gives rise to complex engineering magnetohydrodynamics problems. The development of tools to model, characterize, design, and build liquid metal thermomagnetic systems for space, nuclear, and industrial applications are of primordial importance and represent a cross-cutting technology that can provide unique design and development capabilities as well as a better understanding of the physics behind the magneto-hydrodynamics of liquid metals. First studies for the development of computational tools for the design of liquid metal electromagnetic pumps are discussed.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.13-15
• /
• 1998

EM(Electro Magnetic) pump is used for the purpose of transporting liquid sodium coolant with electrical conductivity in the LMR(Liquid Metal Reactor). In the present study. pilot EM pump has been designed by using of equivalent circuit method which is commonly employed to analyze linear induction machines for the test of removal of residual heat. The length and diameter of the pump have fixed values of 840 mm and 101.6 mm each by taking account of geometrical size of circulation loop for the installation of EM pump. Flowrate versus developing pressure is related from Laithwaite's standard design formula and the characteristic analyses of developing force and efficiency are carried out according to change of input frequency. From the characteristic curve, input frequency of 13 Hz is determined as the design frequency. On the other hand, The annular air gap size of 6.05 mm is selected not to bring about too much hydraulic loss. Resultantly design analysis makes pump have the electrical input of 604 VA and the hydrodynamical capacity of 1.3 bars and 40 l/min.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2903-2908
• /
• 2015

Background: Head and neck cancer (HNC) is the eighth most common cancer as estimated from worldwide data. The incidence of HNC in Peninsular Malaysia was reported as 8.5 per 100,000 population. This study was aimed to determine the treatment outcomes for HNC patients treated in the Oncology Unit of University Malaya Medical Centre (UMMC). Materials and Methods: All newly diagnosed patients with squamous cell carcinoma of head and neck (HNSCC) referred for treatment to the Oncology Unit at UMMC from 2003-2010 were retrospectively analyzed. Treatment outcomes were 5-year overall survival (OS), cause specific survival (CSS), loco-regional control (LRC) and radiotherapy (RT) related side effects. Kaplan-Meier and log rank analyses were used to determine survival outcomes, stratified according to American Joint Committee on Cancer (AJCC) stage. Results: A total of 130 cases were analysed. Most cases (81.5%) were at late stage (AJCC III-IVB) at presentation. The 5-year OS for the whole study population was 34.4% with a median follow up of 24 months. The 5-year OS according to AJCC stage was 100%, 48.2%, 41.4% and 22.0% for stage I, II, III and IVA-B, respectively. The 5-year overall CSS and LCR were 45.4% and 55.4%, respectively. Late effects of RT were documented in 41.4% of patients. The most common late effect was xerostomia. Conclusions: The treatment outcome of HNSCC at our centre is lagging behind those of developed nations. Efforts to increase the number of patients presenting in earlier stages, increase in the use of combined modality treatment, especially concurrent chemoradiotherapy and implementation of intensity modulated radiotherapy, may lead to better outcomes for our HNC patients.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.629-635
• /
• 2018

The present study investigated the effects of feed form and distiller's dried grain with solubles (DDGS) on meat quality and fatty acids profile of broiler chickens. A total of 720 broilers (Ross 308; average BW [body weight] $541{\pm}5.7g$) were randomly allotted to six treatments. Birds were fed three different feed forms (mash; SP, simple pellet; EP, expanded pellet) and DDGS (0 or $200g\;kg^{-1}$) in a $3{\times}2$ factorial arrangement. The addition of DDGS and EP to the diet resulted in increased shear force of breast meat. Moreover, DDGS inclusion in the diet reduced the concentration of stearic acid and behenic acid in thigh meat. Pelleting (SP and EP) of the diets increased palmitic acid content in the thigh, whereas the linolenic acid content decreased. The breast mass was higher with EP and SP diets than with the mash diet. Feed processing led to increased pectoralis muscle and drum mass compared to mash-fed chickens. In conclusion, our results demonstrated that EP decreased thigh linolenic acid and meat shear force. In addition, DDGS supplementation in broiler hampers meat quality by increasing the shear force.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1901-1906
• /
• 2015

Background: Brain metastases occur in about 20-40% of patients with non-small-cell lung carcinoma (NSCLC), and are usually associated with a poor outcome. Whole brain radiotherapy (WBRT) is widely used but increasingly, more aggressive local treatments such as surgery or stereotactic radiosurgery (SRS) or stereotactic radiotherapy (SRT) are being employed. In our study we aimed to describe the various factors affecting outcomes in NSCLC patients receiving local therapy for brain metastases. Materials and Methods: The case records of 125 patients with NSCLC and brain metastases consecutively treated with radiotherapy at two tertiary centres from January 2006 to June 2012 were analysed for patient, tumour and treatment-related prognostic factors. Patients receiving SRS/SRT were treated using Cyberknife. Variables were examined in univariate and multivariate testing. Results: Overall median survival was 3.4 months (95%CI: 1.7-5.1). Median survival for patients with multiple metastases receiving WBRT was 1.5 months, 1-3 metastases receiving WBRT was 3.6 months and 1-3 metastases receiving surgery or SRS/SRT was 8.9 months. ECOG score (${\leq}2$ vs >2, p=0.001), presence of seizure (yes versus no, p=0.031), treatment modality according to number of brain metastases (1-3 metastases+surgery or $SRS/SRT{\pm}WBRT$ vs 1-3 metastases+WBRT only vs multiple metastases+WBRT only, p=0.007) and the use of post-therapy systemic treatment (yes versus no, p=0.001) emerged as significant on univariate analysis. All four factors remained statistically significant on multivariate analysis. Conclusions: ECOG ${\leq}2$, presence of seizures, oligometastatic disease treated with aggressive local therapy (surgery or SRS/SRT) and the use of post-therapy systemic treatment are favourable prognostic factors in NSCLC patients with brain metastases.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10263-10266
• /
• 2015

Background: The risk of febrile neutropaenia (FN) and treatment related death (TRD) with first line palliative chemotherapy for de novo metastatic breast cancer (MBC) remains unknown outside of a clinical trial setting despite its widespread usage. This study aimed to determine rates in a large cohort of patients treated in the University of Malaya Medical Centre (UMMC). Materials and Methods: Patients who were treated with first line palliative chemotherapy for de novo MBC from 2002-2011 in UMMC were identified from the UMMC Breast Cancer Registry. Information collected included patient demographics, histopathological features, treatment received, including the different chemotherapy regimens, and presence of FN and TRD. FN was defined as an oral temperature > $38.5^{\circ}C$ or two consecutive readings of > $38.0^{\circ}C$ for 2 hours and an absolute neutrophil count < $0.5{\times}10^9/L$, or expected to fall below $0.5{\times}10^9/L$ (de Naurois et al, 2010). TRD was defined as death occurring during or within 30 days of the last chemotherapy treatment, as a consequence of the chemotherapy treatment. Statistical analysis was performed using the SPSS version 18.0 software. Survival probabilities were estimated using the Kaplan-Meier method and differences in survival compared using log-rank test. Results: Between $1^{st}$ January 2002 and $31^{st}$ December 2011, 424 patients with MBC were treated in UMMC. A total of 186 out of 221 patients with de novo MBC who received first line palliative chemotherapy were analyzed. The mean age of patients in this study was 49.5 years (range 24 to 74 years). Biologically, ER status was negative in 54.4% of patients and Her-2 status was positive in 31.1%. A 5-flourouracil, epirubicin and cyclophosphamide (FEC) chemotherapy regimen was chosen for 86.6% of the cases. Most patients had multiple metastatic sites (58.6%). The main result of this study showed a FN rate of 5.9% and TRD rate of 3.2%. The median survival (MS) for the entire cohort was 19 months. For those with multiple metastatic sites, liver only, lung only, bone only and brain only metastatic sites, the MS was 18, 24, 19, 24 and 8 months respectively (p-value= 0.319). Conclusions: In conclusion, we surmise that FEC is a safe regimen with acceptable FN and TRD rates for de novo MBC.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1449-1453
• /
• 2015

Background: Oral capecitabine is increasingly replacing intravenous 5-fluorouracil in many chemotherapy regimens. However, data on the risk of febrile neutropaenia (FN) and treatment related death (TRD) with the drug remain sparse outside of clinical trial settings despite its widespread usage. This study aimed to determine these rates in a large cohort of patients treated in the University of Malaya Medical Centre (UMMC). Materials and Methods: We reviewed the clinical notes of all patients prescribed with oral capecitabine chemotherapy for any tumour sites in University Malaya Medical Centre (UMMC) from $1^{st}$ January 2009 till $31^{st}$ June 2010. Information collected included patient demographics, histopathological features, treatment received including the different chemotherapy regimens and intent of treatment whether the chemotherapy was given for neoadjuvant, concurrent with radiation, adjuvant or palliative intent. The aim of this study is to establish the pattern of usage, FN and TRD rates with capecitabine in clinical practice outside of clinical trial setting. FN is defined as an oral temperature > $38.5^{\circ}C$ or two consecutive readings of > $38.0^{\circ}C$ for 2 hours and an absolute neutrophil count < $0.5{\times}10^9/L$, or expected to fall below $0.5{\times}10^9/L$ (de Naurois et al., 2010). Treatment related death was defined as death occurring during or within 30 days of last chemotherapy treatment. Results: Between $1^{st}$ January 2009 and $30^{th}$ June 2010, 274 patients were treated with capecitabine chemotherapy in UMMC. The mean age was 58 years (range 22 to 82 years). Capecitabine was used in 14 different tumour sites with the colorectal site predominating with a total of 128 cases (46.7%), followed by breast cancer (35.8%). Capecitabine was most commonly used in the palliative setting accounting for 63.9% of the cases, followed by the adjuvant setting (19.7%). The most common regimen was single agent capecitabine with 129 cases (47.1%). The other common regimens were XELOX (21.5%) and ECX (10.2%). The main result of this study showed an overall FN rate of 2.2% (6/274). The overall TRD rate was 5.1% (14/274). The FN rate for the single agent capecitabine regimen was 1.6% (2/129) and the TRD rate was 5.4% (7/129). All the TRDs were with single agent capecitabine regimen were used for palliative intent. Conclusions: Oral capecitabine is used widely in clinical practice in a myriad of tumour sites and bears a low risk of febrile neutropaenia. However, capecitabine like any other intravenous chemotherapeutic agent carries a significant risk of treatment related death.