• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.77-83
• /
• 2002

Magnesium alloys casting are gaining increased acceptance in the automotive and electronic industeries and die casting is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of Mg-9Al-lZn alloy fabricated by die casting process for development of air bag case. The microstructure of die casted specimen were composed of pro-eutectic magnesium solid solution and $\beta$(Mg17Al12) precipitates. The tensile strength of as-fabricated Mg-9Al-lZn alloy revealed 231.4MPa. It was found that Mg-9Al-lZn alloy have good corrosion resistance in electrochemical polarization test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.72-75
• /
• 1998

High temperature deformation behavior of Al85Ni10Y5 alloy extrudates fabricated with amorphous ribbons was investigated at temperature range form 300 to 550$^{\circ}C$ by torsion tests. Thermal properties of amorphous ribbons as a function of aging temperature was studied by Differential Scanning Calorimetry(DSC). The Al phase crystallite firstly formed in the amorphous ribbons and its crystallization temperature(Tx) was ∼210$^{\circ}C$. During the processings of consolidation and extrusion, nano-grained structure was formed in the Al85Ni10Y5 alloy extrudates. The as-extrudated Al85Ni10Y5 alloy and the Al85Ni10Y5 alloy annealed at 250$^{\circ}C$ for 1 hour showed the flow curve of DRV(dynamic recovery) during hot deformation at 400-550$^{\circ}C$. On the other hand, the Al85Ni10Y5 alloy annealed at 400$^{\circ}C$ for 1 hour showed the flow curve of DRX(dynamic recrystallization) during hot deformation at 450-500$^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• 제6권1호
• /
• pp.7-11
• /
• 1996

MR-387Al (ARPA-Val-Pro) and A2 (AHPA-Val-Hyp) were prepared as aminopeptidase N inhibitors through the synthesis of peptide MR-387A and B analogues which contained 3-amino-2-hydroxy-4-phenyl butanoic acid (ARPA) as a zinc-chelating moiety. They are competitive inhibitors of aminopeptidase N with inhibition constants(Ki) of 4.1 $\times 10^{-7}\;and 1.1 \times 10^{-6}$ M, respectively. MR-387Al also strongly inhibited aminopeptidase B of human myelogenous leukemia K-562 cell with $IC_50$ of 0.35 $\mu$ M. Inhibitions of aminopeptidase N activity by ARPA-bearing inhibitors of various peptide chain lengths also have been studied. $IC_ 50$ values of AHPA-Val (bestatin), ARPA-Val-Pro (MR-387Al) and ARPA-Val-Pro-Leu (MR-387C) compared against porcine kidney aminopeptidase N were 20.1, 0.60 and 0.08 $\mu$ M, respectively. These results support that a multiple interaction between the $S_1\to S'_3$ sites of aminopeptidase N and the $P_1\to P'_3$ of the inhibitor plays a crucial role in stabilizing strongly the enzyme-inhibitor complex.

• 한국환경교육학회지:환경교육
• /
• 제24권3호
• /
• pp.1-17
• /
• 2011

The purpose of this study was to develop and apply the pro-environmental housing life educational program to improve of pro-environmental attitude for upper grade of elementary school and to verify its effectiveness and influence. To achieve the purpose, documentary and investigatory research was conducted and thereafter the program developed and implemented following 5 stages of analysis, design, development, implement and evaluation. The experiment was made progress as two-group pretest-posttest design, and the program was applied to a class for two hours every week in discretionary activity class for 6 weeks. A reconstructed questionnaire through Kim et al.(2000)'s test tool was used to survey the effects of students's attitudes on environment. The major results were as follows. First, the developed program focused on the main contents of pro-environmental housing life based on ESD. Second, this program had a positive effect on elementary school students' environmental attitude. Third, this program had a positive correlation(.588~.712) among the 3 subdomains of verbal commitment, actual commitment and affect. Fourth, according to qualitative analysis, students appear to be more concerned and interested in the pro-environmental housing life and environmental problem. In conclusion, the pro-environmental housing life educational program based ESD has a positive effect on elementary school students' environmental attitude. Therefore, more intensive research and follow-up study on teaching and learning methods should be highly considered.

• 한국분말재료학회지
• /
• 제7권1호
• /
• pp.12-18
• /
• 2000

Effects of the microstrucrure of rapidy solidified Al-Pb-Cu-Mg alloys on the wear investigated. In order to overcome the miscility gap between Al and pb under equilibrium conditions, both in the solid and the liquid states, the alloy were rapidy solidifies to produce them in a segregation-free condition. Although the Pb particles showed relatively fine dispersion in the Al matrix in all the alloys by this process. the Al-16Pb alloy was found to have the most favorable microstructure with discretre with discrete Pb particles of abount 0.5 ${\mu}$m in size. With the addition of Cu and Cu-Mg to Al-16Pb, cellular structures were newly formed; not seen in the binary Al-Pb alloy. Wear properties of the Al-Pb binary alloys measured as a function of the sliding speen, sliding distance, and applied load showed that the Al-16Pb alloy has the best wear resistance, as expected from the fine microstructural features in this alloy. The were resistance of the alloy containing Cu-and Cu-Mg was higher than that of the Al-16Pvb alloy, due to matrix strengthening by precipitation hardeing. The wear mechanism was identified by examining the traces and wear debris.

• 열처리공학회지
• /
• 제12권1호
• /
• pp.1-8
• /
• 1999

This study has investigated the effect of aging treatment on the microstructure and mechanical properties of Mg-6Al-xZn(x = 1.5, 2.5) alloys fabricated by the squeeze casting process. The microstructures of as-squeeze cast were composed of pro-eutectic ${\alpha}$, super saturated ${\alpha}$ and ${\beta}(Mg_{17}Al_{12})$ compound. Aged at both $200^{\circ}C$ and $240^{\circ}C$, Mg-6Al-xZn alloys showed the peak hardness due to the formation of ${\beta}(Mg_{17}Al_{12})$ precipitates. The discontinuous precipitates of the lamella type are predominant at $200^{\circ}C$ aging treatment, while the finely dispersed continuous precipitates were dominant at $240^{\circ}C$ aging treatment. Mg-6Al-xZn alloys fabricated by the squeeze casting process had the better combination of tensile strength and elongation compared to the conventionally cast alloys. As zinc contents increased, the tensile strength was increased by the solid solution strengthening effect of zinc.

• 디지털융복합연구
• /
• 제18권5호
• /
• pp.249-256
• /
• 2020

세션 시작 프로토콜(Session Initiation Protocol, SIP)은 인터넷 프로토콜 기반 네트워크에서 세션 생성과 관리 및 종료하는데 사용되는 신호 프로토콜이다. 이를 통해 음성 기반 전자 상거래나 인스턴트 메시징과 같은 서비스를 구현할 수 있다. 최근에 Qiu등은 SIP를 위한 개선된 패스워드 인증 기법을 제안하고 모든 알려진 공격에 안전하다고 주장하였다. 하지만, 본 논문에서는 Qiu등의 인증 기법이 오프라인 패스워드 추측 공격에 취약하고 서비스 거부의 문제가 있음을 도출한다. 또한, 이러한 문제를 해결하기 위한 강화된 패스워드 인증 기법을 제안한다. 제안한 기법은 서버의 검증자를 사용하지 않고 타원곡선암호의 기본 연산을 활용한다. 정형화된 보안 검증 툴인 ProVerif에 기반한 보안 검증을 제시한다. 보안 분석을 통해 본 논문에서 제안한 강화된 인증 기법이 SIP 상의 다양한 보안 공격에 안전함을 보인다.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.225-232
• /
• 2009

For comprehensive understanding of the formation behavior of $\beta-Al_5FeSi$ phase in Al-Si-Cu alloys with the existence of Fe element, microstructure characterizations were performed using combined analysis of OM, SEM-EDS, XRD. Especially, experimental and predictive works on solidification events of $\beta-Al_5FeSi$ phase as well as other phases formed together with $\beta-Al_5FeSi$ have been carried out by using DSC analysis and Java-based Materials Properties software (J. Mat. Pro.). Primary and eutectic $\beta-Al_5FeSi$ phases were able to distinguish from each other on microstructures by their morphological features. Primary $\beta-Al_5FeSi$ phase was seen to have rough surface perpendicular to growth direction, indicating free attachment of solute atoms in liquid state. On the other hand, the eutectic $\beta-Al_5FeSi$ phase was formed with plain and straight surface during eutectic reaction together with $\alpha$-Al phase. The eutectic reaction of $\beta-Al_5FeSi$ and $\alpha$-Al phases was seen to be able to separate into each formation depending on cooling rate.

• 대한금속재료학회지
• /
• 제50권7호
• /
• pp.531-538
• /
• 2012

In this study, we evaluated the fluidity of the Al-Zn based alloys which exhibit excellent mechanical properties. We conducted computer simulations of fluid flow using the results of DSC, DTA analysis and Java-based Materials Properties software (J. Mat. Pro). Such computer simulations were then compared with the results obtained from experimental observations. The computer simulation results and the experimental results were very similar in fluidity length. It was found that the fluidity length of Al-Zn alloys is improved by increasing the Zn content while decreasing the solidus temperature of an alloy. In addition, we elucidate the effect of Zn addition on variations in different mechanical properties and the microstructure characteristics of (Al-xZn3Cu0.4Si0.3Fe) x=20, 30, 40, and 45 wt% alloys fabricated by gravity casting.

• 한국주조공학회지
• /
• 제33권4호
• /
• pp.171-180
• /
• 2013

The effects of alloying elements on the solidification characteristics, microstructure, thermal conductivity, and tensile strength of Al-Zn-Mg-Fe alloys were investigated for the development of high strength and high thermal conductivity aluminium alloy for die casting. The amounts of Zn and Mg in Al-Zn-Mg-Fe alloys had little effect on the liquidus/solidus temperature, the latent heat for solidification, the energy release for solidification and the fluidity of Al-Zn-Mg-Fe alloys. Thermo-physical modelling of Al-Zn-Mg-Fe alloys by the JMatPro program showed $MgZn_2$, AlCuMgZn and $Al_3Fe$ phases in the microstructure of the alloys. Increased amounts of Mg in Al-Zn-Mg-Fe alloys resulted in phase transformation, such as $MgZn_2{\Rightarrow}MgZn_2+AlCuMgZn{\Rightarrow}AlCuMgZn$ in the microstructure of the alloys. Increased amounts of Zn and Mg in Al-Zn-Mg-Fe alloys resulted in a gradual reduction of the thermal conductivity of the alloys. Increased amounts of Zn and Mg in Al-Zn-Mg-Fe alloys had little effect on the tensile strength of the alloys.