• 한국IT서비스학회지
• /
• 제19권6호
• /
• pp.145-159
• /
• 2020

Because of the recent development of information and communication technology, companies are exposed to various media such as blogs, social media, and YouTube. In particular, exposed news affects the company's reputation. So, while positive news can improve corporate value, negative news can lead to financial losses for the company. In this study, we redefine corporate reputation as social responsibility, vision and leadership, financial performance, products and services through existing literature, and conducted an AHP survey with a total of four components to calculate the weight of each factor. As a result of the calculation, the proportion of financial performance was the highest at 0.41, and products and services, vision and leadership, and social responsibility were the lowest. In addition, in order to measure the reputation of a company, it is classified as a component that defines online news using the LDA technique. In addition, through sentiment analysis, an index for each corporate reputation factor was derived, and the reputation index was calculated by combining it with the AHP analysis result, and Spearman ranking correlation analysis was performed to secure the validity of the research results. Therefore, the significance of this study is that the definition and importance of the constituent factors can contribute to the future planning and development direction of the company, and also contribute to the derivation of the corporate reputation index. This study is significant in that a new analysis methodology that applied AHP analysis results to sentiment analysis was suggested.

• 농업과학연구
• /
• 제49권1호
• /
• pp.61-75
• /
• 2022

The first purpose of this study is to evaluate the usefulness of pork traceability data, which is monthly time-series data, and to draw implications with regard to its usefulness. The second purpose is to construct a dynamic ecological equation model (DEEM) that reflects the biological characteristics at each growth stage, such as pregnancy, birth and growth, and the slaughter of pigs, using traceability data. With the monthly pig model devised in this study, it is expected that the number of slaughtered animals (supply) that can be shipped in the future is predictable and that policy simulations are possible. However, this study was limited to traceability data and focused only on building a supply-side model. As a result of verifying the traceability data, it was found that approximately 6% of farms produce by mixing great grand parent (GGP), grand parent (GP), parent stock (PS), and artificial insemination (AI), meaning that it is necessary to separate them by business type. However, the analysis also showed that the coefficient values estimated by constructing an equation for each growth stage were consistent with the pig growth outcomes. Also, the model predictive power test was excellent. For this reason, it is judged that the model design and traceability data constructed with the cohort and the dynamic ecological equation model system considering biological growth and shipment times are excellent. Finally, the model constructed in this study is expected to be used as basic data to inform producers in their decision-making activities and to help with governmental policy directions with regard to supply and demand. Research on the demand side is left for future researchers.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• 한국정보전자통신기술학회논문지
• /
• 제17권3호
• /
• pp.121-129
• /
• 2024

디지털 기술의 급속한 발전과 코로나19 팬데믹으로 인해 온라인 상거래가 크게 성장하면서, 소상공인들이 이러한 시장 변화에 적극적으로 대응할 수 있는 지원 방안의 필요성이 대두되었다. 이에 본 논문은 O2O(Online to Offline) 전략을 활용해 실제 매장 진열대에 전시된 상품들을 자동으로 촬영하고 이를 이용해 가상 상점을 만들 수 있는 기초적인 기술을 제시한다. 본 연구의 핵심은 진열된 상품의 위치와 이름을 정확히 파악하여 인식하는 것이며, 이를 위해 단일 클래스를 대상으로 하며 YOLOv8에 기반한 경량화 모델인 ESD-YOLOv8을 제안한다. 검출된 상품은 특징점 기반의 기술을 통해 상품명이 식별되며, 이는 새 상품을 사진 형태로 추가함으로써 신속하게 갱신할 수 있는 능력을 갖추고 있다. 실험을 통해 상품명 인식은 74.0%의 정확도, 위치 검출은 0.3M개의 파라미터만으로 F2-Score 기준 92.8%의 성능을 보였다. 이를 통해 제안된 방법이 높은 성능과 최적화된 효율성을 갖추고 있음을 확인하였다.

• Journal of Microbiology
• /
• 제44권1호
• /
• pp.42-49
• /
• 2006

In this study, we describe our newly-developed sensitive two-stage PCR procedure for the detection of 13 common mycoplasmal contaminants (M. arthritidis, M. bovis, M. fermentans, M. genitalium, M. hominis, M. hyorhinis, M. neurolyticum, M. orale, M. pirum, M. pneumoniae, M. pulmonis, M. salivarium, U. urealyticum). For primary amplification, the DNA regions encompassing the 16S and 23S rRNA genes of 13 species were targeted using general mycoplasma primers. The primary PCR products were then subjected to secondary nested PCR, using two different primer pair sets, designed via the multiple alignment of nucleotide sequences obtained from the 13 mycoplasmal species. The nested PCR, which generated DNA fragments of 165-353 bp, was found to be able to detect 1-2 copies of the target DNA, and evidenced no cross-reactivity with the generated DNA of related microorganisms or of human cell lines, thereby confirming the sensitivity and specificity of the primers used. The identification of contaminated species was' achieved via the performance of restriction fragment length polymorphism (RFLP) coupled with Sau3AI digestion. The results obtained in this study furnish evidence suggesting that the employed assay system constitutes an effective tool for the disagnosis of mycoplasmal contamination in cell culture systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.907-910
• /
• 1997

With increasing the needs for micro and precision parts, micro machining technology has been studied to fabricate a small part with high density such as electronics, optics, communications, and medicine industry more than before. But there are many problems to be solved requiring a high-level technology. So this research presents the new method to fabricate a small part through applying chemical mechanical micro machining (C3M) for the Al wafer. Al(thickness I ,u m) was sputtered on the Si substrate. Al is widely used as a lightweight material. However form defect such as burr has a bad effect on products. To improve machinability of ductile material, oxide layer was formed on the surface of AI wafcr before grooving by chemical reaction with HN03(10wt%). And then workpieces were machined to compare conventional micro-machining process with newly suggested method at different machining condition such as load and feed rate. To evaluate whether or not the machinability was improved by the effect of chemical condition, such as the size, the width of grooves 'and burr generation were measured. Finally, it is confirmed that C3M is one of the feasible tools for micro machining with the aid of effect of the chemical reaction.

• Natural Product Sciences
• /
• 제18권1호
• /
• pp.52-59
• /
• 2012

In our continuous efforts to procure the active materials from natural products in the protective effects of oxidative stress or UV damage to skin cells we found the Prunus persica flesh extract (PPFE) is considerable to meet the demand to protect the skin damage. PPFE attenuated cell damage induced by hypoxanthine-xanthine oxidase in cultured human keratinocytes, indicating that PPFE has the potential of the scavenging effect of reactive oxygen species (ROS) in human skin cell. Moreover, PPFE significantly suppressed UVA-induced ROS production determined by the oxidation of 2,7-dichlorodihydrofluorescein diacetate (DCFH) using FACS analysis. Additional study revealed that UVA irradiation of HaCaT human keratinocytes increased the gelatinolytic activities of matrix metalloproteinase-2, and -9 (MMP-2, -9) and mRNA expression of MMP-9 analyzing by a real-time reverse transcriptase-polymerase chain reaction (RT-PCR), and these events were significantly suppressed by the treatment with PPFE. These results suggest that PPFE might be applicable as natural ingredients for skin antiaging agents via UV-induced ROS scavenging activity and suppression of MMP expression in the skin cells.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.421-431
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the tokenizer in natural language processing for customer satisfaction in sentiment analysis. Methods: In this study, a supervised learning-based tokenizer Mecab-Ko and an unsupervised learning-based tokenizer SentencePiece were used for comparison. Three algorithms: Naïve Bayes, k-Nearest Neighbor, and Decision Tree were selected to compare the performance of each tokenizer. For performance comparison, three metrics: accuracy, precision, and recall were used in the study. Results: The results of this study are as follows; Through performance evaluation and verification, it was confirmed that SentencePiece shows better classification performance than Mecab-Ko. In order to confirm the robustness of the derived results, independent t-tests were conducted on the evaluation results for the two types of the tokenizer. As a result of the study, it was confirmed that the classification performance of the SentencePiece tokenizer was high in the k-Nearest Neighbor and Decision Tree algorithms. In addition, the Decision Tree showed slightly higher accuracy among the three classification algorithms. Conclusion: The SentencePiece tokenizer can be used to classify and interpret customer sentiment based on online reviews in Korean more accurately. In addition, it seems that it is possible to give a specific meaning to a short word or a jargon, which is often used by users when evaluating products but is not defined in advance.

• 시스템엔지니어링학술지
• /
• 제2권2호
• /
• pp.27-32
• /
• 2006

The emerging standards since 1990's can be classified as 'system standards' (process-oriented standards) and they specify the process of an enterprise and also apply to almost all industries regardless of size, type and products. Notice that the conventional specification-oriented standards present relatively clear criteria even though the structure, performance, and terminology are defined in text-based form. However, the system standards dealing with the processes do not present a coherent guide. Therefore, it is difficult to analyze them with the same viewpoint, thereby resulting in differences in the level of understanding. This study is aimed at graphically modeling the system standards originally described in text-based form. The study has been carried out in the framework of the PMTE (Process, Methods, Tools, and Environment) paradigm. The system standard targeted here is ISO/IEC 15288. Firstly, review of the literature on the systems engineering (SE) standard/process and on the graphic model IDEF0 was done, respectively, for the parts of 'E' and 'M'. Then the SE process of the MIL-STD 499B was applied to ISO/IEC 15288 as 'P'. Finally, the graphical model was generated by AI0Wins as 'T'. As a result, the graphical model-based approach can complement the drawbacks of the text-based form.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.790-798
• /
• 2021

With digital technology innovation, increased data access and mobile network use by consumers, products and services are changing toward pursuing differentiated values for personalization, and personalized markets are rapidly emerging in the fashion industry. This study aims to identify trends in digital customized automation technology by deriving types of digital customizing and analyzing cases by type, and to present directions for the development of digital customizing processes and the use of technology in the future. As a research method, a literature study for a theoretical background, a case study for classification and analysis of types was conducted. The results of the study are as follows. The types of digital customizing can be classified into three types: 'cooperative customization', 'selective composition and combination', 'transparent suggestion', and automation technologies shown in each type include 3D printing, 3D virtual clothing, robot mannequin, human automatic measurement program, AR-based fitting service, big data, and AI-based curation function. With the development of digital automation technology, the fashion industry environment is also changing from existing manufacturing-oriented to consumer-oriented, and the production process is rapidly changing with IT and artificial intelligence-based automation technology. The results of this study hope that digital customized automation technology will meet various needs of personalization and customization and present the future direction of digital fashion technology, where fashion brands will expand based on the spread of digital technology.