• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.249-260
• /
• 2003

1998년 12월부터 1999년 5월까지 총 10일간 W UMa형 접촉쌍성 AH Cnc를 소백산천문대의 61cm 망원경과 PM512 CCD 카메라, 그리고 BVI 필터를 사용하여 CCD 측광을 수행하였다. 새롭게 얻은 BVI 광도곡선을 Wilson-Devinney 쌍성모델의 Mode 3(접촉형)으로 분석해서 측광해를 구하고 Roche 모형을 얻었다. 지금까지 발표된 모든 극심시각들과 이번 관측자료를 사용하여 얻은 (O-C)도를 분석해서 영년주기 증가율와 질량이동률을 계산하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.186-191
• /
• 2002

In the CNC gas cutting of steel plate, the cutting quality are strongly dependent on the various cutting conditions. The cutting tests of high tensile steel plate(AH36) were carried out using CNC gas cutting machine at various cutting conditions such as cutting speed, steel plate thickness, distance between tip and specimen etc. The kerf width and the surface roughness of cutting surfaces are examined. The photographs of cutting surface and cutting section are also analyzed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.149-154
• /
• 2003

The cutting tests of high tensile steel plate(AH36) were carried out using CNC plasma arc cutting machine. Both top and bottom width of kerf and the surface roughness(Ra, Rmax) of cut surface are measured under various cutting conditions such as cutting speed, steel plate thickness, etc. In the CNC plasma arc cutting, the surface roughness decreases as cutting speed increases. The hardness is high up to 4mm depth from the cutting surface. In the cutting speed 1300~2100mm/min, the ratio of proper kerf width(Wt/Wb) is around 2.6. Through the series the series of experiments, the satisfactory cutting conditions of high tensile steel plate were found.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.22-22
• /
• 2003

1998년 12월부터 1999년 5월까지 총 10일간 소백산천문대의 61cm 망원경과 PM512 CCD 카메라를 이용하여 W UMa형 접촉 식쌍성 AM Cnc의 CCD 측광관측을 수행하여 BVI 광도곡선을 완성하였다. 새로운 광도곡선으로부터 주극심시각 2점, 부극심시각 3점을 얻었다. 이 관측치를 포함하여 AH Cnc의 관측된 모든 극심시각을 수집하여 분석한 결과, 영년 주기 증가를 보이고, 변화 원인을 질량이 큰 별에서 질량이 작은 별로의 보존적 질량이동에 의한 것으로 해석하였다. 영년주기 증가율은 3.18$\times$$10^{-7}$ day/year이다. 새로운 BVI 광도곡선을 WD 쌍성 모델의 접촉모드(Mode 3)로 분석하여 측광해를 산출하였고, 측광해의 결과는 질량비 0.159, 궤도경사각 86$^{\circ}$, 접촉도(fill-out factor) 49%등으로 계산되었다. 측광해를 Sandquist & Shetrone(2003)의 연구결과와 비교하면 질량비와 궤도경사각은 거의 같고, 접촉도는 약간 작은 값이다. 작은 값이다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.36-38
• /
• 2002

This paper is a study on the effect of the cutting speed, length of tip-specimen and cutting thickness in CNC gas cutting of the high-tensile steel plate(AH36). Experiments were performed to investigate the variations of cutting surface, surface roughness and kerf width under various cutting conditions.

• 대한의용생체공학회:의공학회지
• /
• 제44권6호
• /
• pp.404-413
• /
• 2023

In this research, we studied the development of a SUS304 microneedle array based on microfabrication technology and the applicability of Parylene-C thin film, a medical polymer material. First of all, four materials commonly used in the field of medical engineering (SUS304, Ti, PMMA, and PEEK) were selected and a 5 ㎛ Parylene-C thin film was deposited. The applicability of Parylene-C coating to each material was confirmed through SEM analysis, contact angle measurement, surface roughness(Ra) measurement, and adhesion test according to ASTM standards for each specimen. Parylene-C thin film was deposited based on chemical vapor deposition (CVD), and a 5 ㎛ Parylene-C deposition process was established through trial and error. Through characteristic experiments to confirm the applicability of Parylene-C, SUS304 material, which is the easiest to apply Parylene-C coating without pretreatment was selected to develop a microneedle array based on CNC micromachining technology. The CNC micromachining process was divided into a total of 5 steps, and a microneedle array consisting of 19 needles with an inner diameter of 200 ㎛, an outer diameter of 400 ㎛, and a height of 1.4 mm was designed and manufactured. Finally, a 5 ㎛ Parylene-C coated microneedle array was developed, which presented future research directions in the field of microneedle-based drug delivery systems.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.390-397
• /
• 2022

Parylene-C which was mainly used for industries such as electronics, machinery and semiconductors has recently been in the spotlight in the medical field due to its properties such as corrosion resistance and biocompatibility. In this study we intend to derive a plan to improve the bonding strength of Parylene-C coating with the SUS304 base material for medical use which can be applied to various medical fields such as needles, micro needles and in vitro diagnostic device sensors. Through plasma pretreatment the bonding strength between Parylene-C and metal materials was improved. It was confirmed that the coated surface was hydrophobic by measuring the contact angle and the improvement of the surface roughness of the sample manufactured through CNC machining was confirmed by measuring the surface roughness with SEM. Through the above results, it is thought that it will be effective in increasing usability and reducing pain in patients by minimizing friction when inserting medical devices and in contact with skin. In addition it can be applied to various application fields such as human implantable stents and catheters, and is expected to improve the performance and lifespan of medical parts.