• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.341-347
• /
• 1984

In order to provide orange sac for off-season processing of sac-suspended orange juice, orange was processed into intermediate form of orange sac or segment, stored at $20^{\circ}C$ and after 5 months of storage the intermediate product was finally processed into sac-suspended orange juice. Adaptability of various process and packaging was assessed. Pasteurized orange sac and segment could be relatively stable in view of microbiological spoilage during 5 months of storage. Between pasteurization methods of hot fill process and each of in-pouch or in-can process, there is no difference in quality of preliminary processed product during storage and final sac-suspended orange juice. In packaging method, metal can gave the best result and the next was 3 ply (PE/AL/PET) pouch and the last 2 ply (PE/PET) pouch. Storage in segment form was superior to sac storage. Sensory evaluation revealed better scores in final product processed from stored orange sac or segment than in control (initially processed sac-suspended orange juice) except 2 ply packaged sac.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.170-176
• /
• 1983

Starchy single cell protein produced by a starch-utilizing yeast, Sporobolomyces holsaticus FRI Y-5 was analyzed for its composition such as intracellular protein, amino acids, fatty acids, minerals, vitamins and pigments. It was shown that it contained 33.08% of total carbohydrate, 45.63% of crude protein, 20.01% of crude lipid, 3.24% of ash and 4.46% of pigment. Whole cell extracted by cold and hot NaOH method contained 40.89% of soluble protein and the estimated nucleic acid content from crude and soluble protein contents was about 7.6%. The sulphur-containing amino acids, threonine, isoleucine and valine were analyzed to be the limiting amino acids in the starchy SCP, and the protein score was calculated as 89.4. It was shown from its fatty acid analysis that it contained $6.5%\;of\;C_{16:0}$, $2.4%\;of\;C_{18:0}$, $81.9%\;of\;C_{18:1}$, $3.2%\;of\;C_{18:2}$, and $6.0%\;of\;C_{18:3}$. Also it was observed that it contained, per 100 g of dry cell, 365.33mg of Mg and 282.75mg of K more than Fe and Ca. The content of Vit. $B_2$ was 3.7mg per 100 g of dry cell, but niacin was not detected under this experimental condition. The UV-visible scanning result of pigment extract showed that the yeast contained carotenoid and unknown pigments.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.177-182
• /
• 1983

Direct conversion of starchy materials to single cell protein of Sporobolomyces holsaticus FRI Y-5 was investigated. Effect of yeast extract concentration on its cell growth showed that it could utilize more of starch in the medium containing 2.5 g/l of yeast extract. In case of jar fermentor culture, the specific growth rate and cell yield of Sp. holsaticus on soluble starch were calculated to be $0.14\;hr^{-1}$ and 0.425, respectively and its maximum cell concentration was 13.4 g/l. After 80 hr of incubation time, 45.96% of starch was consumed and 45.1% of relative blue value was decreased. Reducing sugars in the starch medium seemed to increase from 4.06 g/l to 6.08 g/l and then to decrease. During fermentor culture, pH of medium was almost not changed in the range of $pH\;7.0{\pm}0.5$. The optimal temperature and pH of Sp. holsaticus amylase activity were $40^{\circ}C$ and pH 7.5, respectively. It was shown from the effect of Tapioca starch concentration on the cell growth that the optimal concentration of Tapioca starch for Sp. holsaticus was lower than that of soluble starch. FRI Y-5 cells settled much slower than Sp. holsaticus IFO 1032 cells and the viscosity vs cell concentration relationship was related to be linear.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.56-61
• /
• 1983

Direct production of biomass from starch using amylolytic yeast, Sporobolomyces holsaticus FRI Y-5 was studied with varying the ratios between carbon and other nutrient sources in the medium. It was investigated under condition of constant C/P and C/S ratio to influence the initial concentration of starch $(S_o)$ and C/N ratio on its growth which is described as the specific growth rate $({\mu})$, cell yield (Y), the maximum concentration of cell $(X_m)$, and productivity (P). They were very dependent on both $S_o$ and C/N ratio. The form of the relationship between and ${\mu}$ and $S_o$ was observed to be similar to saturation kinetics at C/N = 100 but presented substrate inhibition at other C/N ratios. As $S_o$ was changed from 22.5 to 90 g/l, Y was observed to vary with C/N ratios but seemed to decrease as a wholes. $X_m$ was linearly related to $S_o$ at more than C/N = 50 but at less than C/N = 10 substrate inhibition was presented. P increased suddenly to $S_o$ = 45 g/l and then changed decreasingly at less than C/N = 50, but at more than C/N = 100 it changed increasingly. The effect of C/P ratio and C/S ratio on the yeast growth was also investigated at constant $S_o$ and C/N ratio. ${\mu}$ was dependent on C/P and C/S ratios, but Y, independent on them. But $X_m$ was reliant upon C/P ratio but not upon C/S ratio.

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.151-155
• /
• 1982

Effects of vitamins, metabolic intermediates and several inorganic mineral salts on the biomass and lipid accumulation of Mucor plumbeus were investigated after 15 days of incubation at $37^{\circ}C$ under static culture condition. The optimum concentrations of various vitamins were ${\gamma}/l$ for biotin, and 0.01 g/l for nicotinic acid, pyridoxine, thiamine and riboflavin. Among them pyridoxine was the most stimulatory. The maximum felt weight and lipid content per 50ml medium were $2.82{\pm}0.14\;g$ and 62.8%. Triglyceride content of neutral lipid produced under this condition was 64.9%. The major fatty acids were oleic acid (50.0%), linoleic (23.8%) and palmitic acid (13.9%). Malonic acid was considered not to be desirable even though it stimulated the biomass and lipid accumulation because triglyceride content was lowered considerably comparing with control. $MgSO_4{\cdot}7H_2O$ was the most stimulatory among the various magnesium salts and its optimum concentration was 5 g/l. Mucor plumbeus did not require $NaH_2PO_4$ for the stimulation of felt and lipid production. However, the addition of $MnCl_2$ at the concentration of 2 g/l was stimulatory to show $2.76{\pm}0.28\;g$ of felt/50 ml and 56.4% lipid content, and 73.9% triglyceride in the neutral lipid.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.206-210
• /
• 1984

Heat penetration pattern of canned oyster mushroom(Pleurotus astreatus) was monitored for processing variables-can size, heating temperature and solid fill fraction, and its effects on sterilization condition was reviewed. The $f_h$ value decreased sharply with decrease of solid fill fraction and then became stable from certain solid fill fraction unique to can size. Heat penetration was a little faster at higher heating temperature with lower $f_h$ value. As viewed from $f_h$ value, convection started at higher solid fill fraction with higher length/diameter ratio, and $f_h$ values decreased to about 1.0 with decrease of solid fill fraction. From standpoint of overall cost, retorting time and energy consumption, solid fill fraction of 3/5 was optimum for all can sizes considered.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.16-20
• /
• 1982

The texture changes of potato of the variety ‘Namjack’ were determined as a function of temperature and boiling time by a puncture test with Universal Testing Machine. Apart from texture measurement, heat penetration test and sensory evaluation were carried out. Textural softening during cocking could be expressed by the puncture work and was followed first order kinetics. The Z-value for texture changes was $19.9^{\circ}C$. The cook value in equivalent minutes at $100^{\circ}C$ to get a boiled potatoes was 7 min. Mechanically the boiled product could be regarded as cooked when the final puncture work reduced to the equilibrium value, approximately 6/100 of the initial value.

• Korean Journal of Food Science and Technology
• /
• v.16 no.4
• /
• pp.429-436
• /
• 1984

To expand the utility of barley the experiments on the extrusion characteristics of barley flour for snack processing were carried out and the effects of the extrusion conditions on the quality of the extrudates were investigated. The optimum moisture content of barley flour for snack processing was 20%. The moisture content and the density of the extrudates decreased with increasing extrusion temperature and decreasing die size. The die swell ranged from 0.98 to 2.18 according to various extrusion conditions and decreased with increasing temperature above $150^{\circ}C$. The lightness, redness and yellowness increased at higher temperature. The water absorption index and the water solubility index showed their maximum values at $180^{\circ}C$.The gelatinization degree of the extrudates increased with increasing temperature. The fracture fore, Young's modulus and maximum fiber stress decreased, but the deformation to fracture increased, with increasing temperature and decreasing die size. The yield force in puncture test showed lower values at higher temperature. The size and the fraction of the air cells increased with increasing temperature and decreasing die size. The optimum extrusion conditions of barley for snack processing were at the temperature of $180^{\circ}C$, with the die size of 4.5mm when processed at 160 rpm.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.180-185
• /
• 1985

The alkali refined rice bran oil (ARBO) and the esterified rice bran oil (ERBO) with glycerol were compared for their thermal stabilities at $150^{\circ}C$ and $180^{\circ}C$, respectively. The acid value gradually increased in ARBO during heating period but increased slowly in ERBO-2 and declined gradually in ERBO-1. The peroxide value was somewhat fluctuated during heating period, and the maximum peroxide value in all samples was 13.3 meq/kg. TBA value was sharply increased for the first 10 hr. heating and slowed down thereafter for all samples but ERBO were intensely colored after the heat treatment. The TG ratio of the oils after 90 hr. heating was not different at $150^{\circ}C$ but ERBO was 2-7% higher ratio of TG than ARBO at $180^{\circ}C$. The oxidative stability of ARBO was twice higher than ERBO according to the result of active oxygen test.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.175-179
• /
• 1985

The alkali refined rice bran oil (ARBO) and the esterified rice bran oil (ERBO) with glycerol were analyzed for their physicochemical charateristics and the compositions. Specific gravity, refractive index and yellowness of ERBO was higher than ARBO but smoking point was 60-$80^{\circ}C$ higher than ERBO. The free fatty acid content was 0.05% a ARBO and 0.88-1.36% ERBO. The wax was not detected in ARBO but the soft and hard waxes were detected in ERBO. The lipids were composed of 98-99% neutral lipid, 0.2-0.5% glycolipid and 0.1-0.5% of phospholipid in all samples. The triglyceride content of neutral lipid was 96.3% ARBO and 93.0-94.1% ERBO, and its monoglyceride content was 0.11% ARBO and 0.39-0.69% ERBO. The major fatty acid composition of samples were 41-42% oleic, 36-40% linoleic and 17-18% of palmitic acid.