• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1709-1715
• /
• 2011

A track-circuit device exploits two rails as a conductor of an electrical circuit. It detects the presence or absence of the trains with variation of received level when wheel sets of the train shunt rails together. So, it plays an important role in train operation. Non-insulated audio frequency(AF) track-circuit device can separate the rails into tracks by insulated joints without physically cutting the rails. And it transmits AF signals at track boundary, of which frequency is different between adjacent tracks. It has been employed at station-to-station section of domestic high speed rail, general rail, and subway. But It was not used at station yard of complicated general railway where lots of branches exist. In this paper, we consider current development status of non-insulated AF track-circuit device for the use of station yard.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.500-503
• /
• 2010

Until now, the track circuit with railroad which is a part of an electrical circuit wad used only for the detection of the train location, but as train speed is up to be higher, in order to overcome the limits of ground signal system the railway signal system has changed from the ground signal system to a cab signal system. The power source of the track circuit has also changed from a direct current or a high voltage impulse to an alternating current with high frequency which is a part of the audio frequency. To improve the maintenanability and according to the environment condition, the railway roadbed is rapidly changed to the ferroconcrete roadbed. In case of a track circuit to use an alternating current with high frequency as power source at a ferroconcrete roadbed, the characteristic of the track circuit is brought on a change from a loss of the magnetic combination instead of a leakage current from electric insulation which was caused by the reinforcing iron pod with lattice shape for durability. This paper is shown the influence and the loss of the signal current at AF track circuit on a ferroconcrete in the simulation sheets and presented a proposal for the preventive method from reduction of signal current.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1701-1706
• /
• 2007

Jointless AF(Audio Frequency) Track Circuit is more comfortable than exist joint track circuit. This electrical circuit's function is detection train on rail, and transmit information between wayside and vehicle. 'Korea Railroad Corporation' proposed for revision of the Korean railway standards(KRS SG 0038-06 R, 2006.5.16) "Non-insulated AF Track Circuit". This proposal equipment developed to extend use for station of National Railway exist line. According to test standards Korean railway safety law and its ordinances, which were committed to Korea Railroad Research Institute, the professional committee 'Railway facility sector II' have helded on January in 2007. In this investigation, the changed test norm will be review the difference of important function test standards of new version to conform effectivity and safety test procedure according to the KS A 1025.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4849-4854
• /
• 2015

It has been often occurred for the outside components(BU, SVaC, DB) of UM71c AF track circuits to be broken down caused by some pieces of falling ice in the winter time or by infrastructure repairing equipments while facility maintenance works since 2004, opening of Kyeongbu High Speed Rail Express. In this paper, we proposed that we could move the outside components of UM71c track circuit out of wayside from present place. Then we can assure that the life time of those components would be extended. So we simulated the electrical characteristics by changing cable length using MATLAB Simulinks and we designed the compensation capacitor. Also, we obtained the same results as those of simulation by field demonstration test on site. The design specifications obtained from this field verification test could be applied in the absent section of track circuit, if only have a little more intensified research to compensate changed electrical characteristics and to redesign inner impedance of the track circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4762-4767
• /
• 2012

The AF track circuit that detecting train position and transmitting various train control data for DTG to the train on-board is composed of single operation system. If a failure occurs on this system, the driver should be operate the train by manually until the system is restored, because the system cannot control switch machines and signals by automatically. In this process the human error affects to the train delay, collision, derailment and critical safety accident. Therefore, this document has analyzed the effects that each failure mode influences on system and train, and quantified the failure valuation point and class. Basis on this quantified analysis result, MTBF increased and MTTR decreased and failure number also decreased by adopting the independent installation of power supply, the replacement of defected capacitors, the installation of resister cooling system and the improvement of maintenance methods. And the failure factors of AF track circuits were decreased by conducting the preventive maintenance which is a quantitative way of maintenance system by experience.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2360-2362
• /
• 2005

전기철도 분야에서 전자기파에 의한 환경영향 평가는 중요한 요소가 되고 있으며 급전시스템, 신호시스템, 차량시스템 등으로 나누어 각각에 대한 전자기파 환경 영향에 대한 평가에 관한 사항이 연구 중에 있다. 특히 신호시스템 중, AF(Audio Frequency)궤도회로는 철도차량과의 빈번한 통신을 통하여 철도차량 제어에 많은 역할을 담당하므로 잡음에 취약하고 오동작은 사고로 직결되므로 이러한 잡음에 대한 평가는 중요하다 할 수 있다. 본 논문에서는 전기철도차량과 신호시스템 중 AF궤도회로와의 전자기적합성을 입증할 수 있는 고조파 분석을 통한 전도성잡음의 시험 및 평가에 대한 방안을 제시한다.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.38-45
• /
• 2016

The power transformation system of High Speed rolling stocks like KTX-Sancheon has shown excellent control capacities in the areas of riding comfortability, switching efficiency, safety and energy consumption due to technical developments in power-electronics, high speed & large scale integrated semiconductors and microprocessors. However, harmonics from IGBT, a high speed switching device used in the Convertor & Invertor equipment of rolling stocks have given rise to various problems in transformer substations, signaling systems, data transmission systems and facility monitoring systems. Especially, TI21 non-insulated track circuits have malfunctioned due to the influence of returning current harmonics which were generated at around of integer times of the number of power transformation equipment in the frequency domain. This paper, measures and analyzes various schemes to analyze the traveling path of the returning current harmonics generated due to the relationship between the rolling stocks and track circuits on site. Ultimately, theseschemes will be used to design high speed rolling stocks, AF track circuits and a common grounding network.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.363-370
• /
• 2021

In this paper, we presented an optimized crack and flexural strength analysis of a glass-fiber reinforced polymer (GFRP) rebar, used as reinforcements for in-site railway concrete slabs. The insulation performance of a GFRP rebar has the advantage of avoiding the loss of signal current in an audio frequency (AF) track circuit. A full-scale experiment, and three-dimensional finite element simulation results were compared to validate our approaches. Parametric numerical results revealed that the diameters and arrangements of the GFRP rebar had a significant effect on the flexural strength and crack control performances of the concrete track slabs. The results of this study could serve as a benchmark for future guidelines in designing more efficient, and economical concrete slabs using the GFRP rebar.