• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.617-618
• /
• 2015

IT convergence with agriculture is expected to bring more efficiency and quality improvement in pre-production stage, Production stage, post-production stage of agricultural products with the aid of information processing and autonomous control technologies of the IT area. This paper describes the actualized convergence service for agriculture, namely Smart Farming as a solution to cope various problems caused by severe conditions or the gap of viewpoints between the people engaged in farming and the IT engineers. In particular this defines service capabilities for Smart Farming, provides a reference model for Smart Farming, and identifies network capabilities required to produce an infrastructure which supports Smart Farming.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.290-296
• /
• 2012

In this paper, we propose a practical authentication system based on Wireless Body Area Networks(WBAN) for U-healthcare medical information environments. The proposed authentication system is based on symmetric cryptosystem such as AES and is designed to not only provide security such as data secrecy, data authentication, data integrity, but also prevent replay attack by adopting timestamp technique and perform secure authentication between sensor node, master node, base-station, and medical server.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.32-32
• /
• 1997

복합재 연소관의 구조적 건전성 평가 방법을 개발하기 위하여 표준 평가용 시편의 수압 시험 중, 연소관으로부터 방출되는 음향방출(acoustic emission: AE) 신호를 측정 장비를 이용하여 신호 처리함으로써 시편이 파괴되기 전, 대략적인 시편의 파열 위치 및 일정 압력 유지상태에서 hit rate 양상에 의한 건전성 평가 방법을 제시하였다. 데이터의 분석 기법 향상을 위하여 음향방출 데이터를 시간 및 센서별로 분류하는 프로그램을 개발하였다. 수압 시험을 낮은 압력 단계부터 높은 압력 단계까지 일정 압력 유지 상태(load-hold)에서 발생한 hit 수와 1분간 유지한 후 발생되는 hit rate(hit/sec)의 값의 크고 작음이 복합재 압력 용기의 결함수의 증감으로 나타났으며, 이로부터 복합재 압력 용기의 파열 압력과의 상관관계 및 건전성을 예측할 수 있었다. 복합재 압력 용기의 파열 위치는 energy rate(energy/sec) 측정값을 분석하여 예측하였으며, 파열 압력의 30∼50%에서 가능하였다.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.200-202
• /
• 2002

The use of ultrasound is proposed as the most economic and practical nondestructive test method for the detectin of electrical degradation in insulating materials. This paper has studied identification and characterization of partial discharge signals according to defects in GIS using AE(acoustic emission)sensor. Analysis of PD signals use $\psi-v-n$, skewness and kurtosis.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.75-84
• /
• 1994

기계가공프로세스에서 절삭공구의 마멸과 채터진동은 공작기계의 가동율과 생산성을 크게 저해하는 요인이 되고 있다. 본 연구에서는 공구마멸과 채터현상이 혼재하는 상황에서, 이들 두 현상을 동시에 검출하는데, AE 및 가속도센서에서 검출된 신호와 AR계수 및 주파수대역 평균에너지를 특징입력으로 하는 인공신경회로망을 이용하였다. 그 결과, 공구마멸과 채터현상에 대응하는 서로 다른 신호특징의 차이를 동시에 식별하는 데 인공신경 회로망의 유용성을 입증하였으며, 시계열모델의 AR계수(70 .approx. 90%)보다는 주파수대역에너지법의 평균에너지 (80 .approx. 100%)를 신경회로망의 특징입력으로 하는 경우가 높은 성공률을 나타내었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.875-877
• /
• 2015

IoT 환경의 센서 네트워크와 RFID 태그 등에서의 AES나 SEED에 대응 할 수 있는 새로운 저전력 경량화 암호 알고리즘이 필요 해짐에 따라 본 논문에서는 2006년 국내에서 제안된 HIGHT와 2007년 CHES에서 제안된 PRESENT 알고리즘을 Arduino에 적용하여 성능을 비교분석 하였다. 그 결과 HIGHT 알고리즘이 PRESENT알고리즘에 비하여 더 짧고, 적은 수행시간과 프로그램 메모리 사용량을 보였으며, 더 많은 동적 메모리 사용량을 보였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.100-108
• /
• 1995

The In-process minitoring of the chatter vibration is necessarily required to an automatic manufacturing system. In this study, we constructed a multi-sensing system using tool dynamoneter, accelerometer and AE(Acoustic Emission) sensor for a more credible detection of chatter vibration. And a new approach using a multiple neural network to extract the features of multi-sensor for the recognition chatter vibration is proposed. With the Back-propagation training process, the neural network memorize and classify the features of multi-sensor signals. As a result, it is shown by multiple neural network that the chatter vibration can be monitored accurately, and it can be widely used in practical unmanned system.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.173-181
• /
• 1992

Tantalum pentoxide($Ta_{2}O_{5}$) thin films on p-type (100) silicon wafer were fabricated by RF reactive sputtering. Physical properties and structure of the specimens were examined by XRD and AES. From the C-V analysis, the dielectric constant of $Ta_{2}O_{5}$ films was in the range of 10-12 in the reactive gas atmosphere in which 10% of oxygen gas is mixed. The ratio of Ta : 0 was 1 : 2 and 1 : 2.49 by AES and RBS examination, respectively. The heat-treatment at $700^{\circ}C$ in $O_{2}$ ambient led to induce crystallization. When the heat-treatment temperature was $1000^{\circ}C$, the dielectric constant was 20.5 in $O_{2}$ ambient and 23 in $N_{2}$ ambient, respectively. The crystal structure of $Ta_{2}O_{5}$ film was pseudo hexagonal of ${\delta}-Ta_{2}O_{5}$. The flat band voltage shift(${\Delta}V_{FB}$) of the specimens and the leakage current density were decreased for higher oxygen mixing ratio. The maximum breakdown field was 2.4MV/cm at the oxygen mixing ratio of 10%. The $Ta_{2}O_{5}$ films will be applicable to hydrogen ion sensitive film and gate oxide material for memory device.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.68-76
• /
• 2011

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect any further growth or expansion of preexisting defects or to characterize failure mechanisms. Recently, this kind of technique, that is an in-situ monitoring of inside damages of materials or structures, becomes increasingly popular for monitoring the integrity of large structures like a huge wind turbine blade. Therefore, it is required to find a symptom of damage propagation before catastrophic failure through a continuous monitoring. In this study, a new damage location method has been proposed by using signal mapping algorithm, and an experimental verification is conducted by using small wind turbine blade specimen; a part of 750 kW real blade. The results show that this new signal mapping method has high advantages such as a flexibility for sensor location, improved accuracy, high detectability. The newly proposed method was compared with traditional AE source location method based on arrival time difference.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.233-239
• /
• 2004

Smart material is used in various applications such as for glass frame, for medical instruments and for a part of sensors. Smart composite materials ran be applied to a part of aircraft and to the on-line monitoring system for industrial structures, using the shape memory effect. However, it is very difficult to simulate and analyze the shape memory effect in smart composites. In this paper, a two dimensional axisymmetric model was proposed to analyze the smart composite of one fiber and matrix using the finite element method(FEM). The finite element analysis was carried out in two renditions of the room temperature(293K) and a higher temperature (363K). The results we.e compared with the experimental results to confirm the validity of the analysis. In addition, the acoustic emission(AE) technique was used to study the microscopic damage behavior and the effect of pre-strains on TiNi/A16061 shape memory alloy composite.