• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.1-5
• /
• 2010

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect or monitor preexisting defects and leaks in the vessel structures. A Bragg grating based acoustic emission sensor system is developed. Various type of fiber Bragg grating sensor including the variable length of sensing part was fabricated and prototype sensor system was tested by using PZT pulser and pencil lead break sources. Two types of sensor attachment were used. First, the fiber Bragg grating sensor was attached fully to the surface using bonding agent. Second one is that one part of fiber was attached to the surface partly by bonding and the other part of fiber will be act as a cantilever. That is, the resonant frequency of the fiber Bragg grating sensor will depend on the length of sensing part. The final goal of the sensor system is to provide on-line monitoring of cracks or leaks in reactor vessel head penetration of nuclear power plants.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.107-113
• /
• 2001

This study was conducted preliminarily to develop the crack source location technique for plain concrete beam using acoustic emission(AE). Before the main experiment, the test of virtual An source location was achieved in plain concrete block. The sensor layout was mutually compared between triangular layout and rectangular layout. As the results of test, AE source location by triangular layout was evaluated more effective than that by rectangular layout. The specimen to apply he source location technique was man in total nine specimens (each three in 40 %, 50%, 60% of W/C ratio) which the experiment variable was the compressive strength level(W/C ratio). The bending loading method is selected by cyclic loadings to evaluate the degree of concrete damage. It is seen that Kaiser effect and Felicity effect exists through analysis of AE parameters in coming failure experiment. As a result of analyzing the felicity ratio(FR) values, it is shown that this values can be used for evaluating the degree of concerto damage. AE activity is started highly at the 70% of failure load without the compressive strength level. Thus considered by a index in constructing the system of the failure warning at application of the field structure. And the results compared the real cracking location with the source location has perceived by AE monitoring before it is appeared the primary crack by visual observation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

This study proposes a monitoring system that effectively watches surroundings by cooperating the various sensor information including image information on a sensor network system. The monitoring system proposed in this paper is developed to watch certain intruders to the internal spaces through the interested region for exceptional time by installing cameras, PIR(Pyroelectric Infrared Ray) sensor and body detectors in such interested regions. Moreover the monitering system is implemented based on the SenWeaver plateform which is a integrated development tools for building wireless sensor network system. In the results of the test that was applied to a practically experimental environment by implementing some interfaces for the proposed system, it was considered that it is possible to watch surroundings effectively using the image information obtained from cameras and multiple sensor information acquisited from sensor nodes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.50-57
• /
• 2004

For the application of structural health monitoring such as AE detection, a stabilized FBG sensor system with wide dynamic range was proposed. A tunable Fabry-Perot filter with narrow free spectral range(FSR) was used to simplify the multiplexing demodulator for FBG vibration sensors. Stabilization controlling system was also developed for the maintenance of maximum sensitivity of the sensors. In order to verify the performance of the proposed FBG vibration sensor system, we measured sensitivity, and the system showed the average sensitivity of 256 $n{\in}_{mas}/{\sqrt{Hz}}$. Finally, multi-points vibration tests using in-line FBG sensors were conducted to validate the multiplexing performance of the FBG system.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1797-1799
• /
• 2002

$SF_6$ 가스로 절연되는 GIS (Gas Insulated Switchgear)는 매우 우수한 신뢰성을 확보하고 있지만 사고 발생 시 파급효과가 매우 크므로 상시 감시할 수 있는 진단기술이 요구된다. 본 논문에서는 GIS 내부에서 발생하는 신호를 검출하기 위해서 전기적인 방법과 비전기적인 측정 법을 통해 전자파. 초음파, 전류펄스를 측정하고 비교하였다. GIS 내부알루미늄도체에 침 결함을 고정시켜 전원전압 인가 시 발생되는 부분방전신호를 UHF, AE, CT센서로 검출하였다. 측정 결과 UHF센서와 CT센서로 검출되어진 신호는 매우 유사하게 측정되었고 초음파와 전자파를 검출한 결과 진행속도 차이로 발생되는 시간지연현상이 발생되었다. GIS내 부분방전발생 시 발생되는 전자파 스펙트럼 분석결과도 650MHz에서부터 935MHz까지의 주파수대역이 측정되었다. 이후에는 현장에서 운전중인 GIS내부에서 발생되는 결함들을 실제와 가깝게 모델링하여 발생되는 부분방전신호를 스펙트럼 분석하여 대역에 맞는 UHF센서 개발에 노력하고자 한다. 또한 결함의 종류와 형태에 따라 다르게 발생되는 부분방전신호를 검출하여 측정하고 이를 진단하는 연구가 계속 진행되어야 할 것으로 사료된다.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.101-103
• /
• 2004

본 연구는 전력 계통에 상용화된 $SF_6$ GIS(Gas Insulated Switchgear) 내부에서 발생되는 부분방전 검출 방법을 개발하기 위하여, GIS의 내부에 유입되거나 생산과정에서 형성 될 수 있는 세 가지 결함들을 연구용 GIS 내부에 모의하였으며 또한 특성이 다른 센서(UHF, CT, AE)를 제작 또는 이용하여 그 부분방전 패턴 결과와 주파수 분석 결과를 상호 비교하였다. 실험결과에 의하면, 동일한 결함에 의하여 센서의 검출 결과는 다르게 나타나거나 전혀 검출이 되지 않음이 밝혀졌다. 따라서, 부분방전 패턴분석을 하나의 분석방법에 의존하는 것은 바람직하지 못한 것으로 사료되며 신뢰성 있는 GIS 진단을 위하여 적합한 센서개발 및 두 가지 이상의 분석 방법이 병행되는 것이 절대적으로 필요한 것으로 사료된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.204-207
• /
• 2018

IoT 기기 및 드론의 사용자 인증 및 기기 인증을 위해 RSA, ECDSA 등의 여러 전자서명 기법이 기본적으로 사용되고 있다. 그러나 양자 컴퓨터의 개발에 따라 Shor 알고리즘을 이용한 기존 암호 알고리즘의 공격이 가능해지고, 그에 따라 기존 암호 알고리즘의 보안성이 취약해지는 문제가 있다. 따라서 양자 내성 암호를 활용한 보안 체계의 필요성이 대두되고 있는 가운데, 본 논문에서는 양자 내성 암호인 다변수 이차식 기반의 전자서명 기법 중 Rainbow를 드론에 최적화하여 구현하기 위한 방안을 검토 및 분석하고자 한다. 그러나 기존의 Rainbow에서 사용하는 openssl 등의 오픈소스 암호 라이브러리는 PC에 맞춰 설계되었기 때문에 드론에서 난수를 생성할 때 적용이 어려운 점이 있다. 드론에는 각종 센서들이 내장되어 있으며, 센서 데이터들은 난수성을 보장하기에 용이하다. 따라서 드론의 각종 센서들을 시드로 활용하며, XOR 보정기를 통해 난수성을 해치지 않으면서 드론에서 난수를 생성할 수 있는 방안을 제안해 보고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.3
• /
• pp.191-204
• /
• 1998

One of the key issues in acoustic emission (AE) during hydroproof test of filament-wound composite rocket motor cases is the determination of the optimal component of elastic wave to be monitored. To solve this problem, broadband ultrasonic wave was generated into a symmetrically filament-wound composite motor case, and was received at 105 different locations after the propagation through the composite case with different distances and directions. By analysis of the received signals, characteristics of elastic wave propagation such as frequency components, the maximum propagating distance, and velocity surface were investigated. This analysis was performed for two different conditions of the motor case; air-filled and hydraulically pressurized. Based on these information, the effect of hydraulic pressure on the wave propagation characteristics was investigated and furthermore, the optimal component of elastic wave for AE during hydroproof test of the motor case was successfully determined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1011-1017
• /
• 1999

Electrolytic in-process dressing grinding technique which enables application of metal bond wheels with fine superabrasives in mirror surface grinding operations has developed. It is possible to make efficient precision machining of hard and brittle material such as ceramic and hard metal by the employment of this technique. However, in order to ensure the success of performances such as efficient machining, surface finish, and surface quality, it is important to sustain the insulating layer that has sharply exposed abrasives in wheel surface. Using AE(Acoustic Emission) sensor, this paper will show whether the insulating layer sustains stably or not in real grinding time. And by comparing AErms value and surface roughness their thresholds for stable electrolytic in-process dressing grinding will be determined.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.74-80
• /
• 1999

Recently, manufacturing work has been transformed to small scale production form with various types to act up to user's expectation from mass production with a little items required in the past. Then FMS using NC type machinaries has been applied actively also in domestic manufacturing line to meet thus tendency, but there are many machining troubles occured during work process not be settled yet. Nowdays high efficiently has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advance FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigate the machining condition in grinding process. As results form this experimental study, it is recognized well that grinding conditions and dressing point of in time cab be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.