• 한국항공운항학회지
• /
• 제27권2호
• /
• pp.16-25
• /
• 2019

While various efforts are being made to ensure aviation safety, air accident rate induced by pilot human factors is still high worldwide. In particular, among pilot human factors, it would be the most important issue for pilots to anticipate and recognize flight environmental factors beyond their control and to make a positive decision making(ADM). In the Republic of Korea Air Force(ROKAF), there were many dizzying experiences induced by bird strike incidents and developed into dangerous moments such as damage to the aircraft and pilots' increased mental stress. It is a matter of serious concern in terms of safety management and human factors to dismiss bird strike incidents as inevitable misfortune due to environmental factors. In 2018, the ROKAF Aviation Safety Agency(ASA) conducted an experimental study to enhance pilots' ADM competence that can anticipate and avoid a bird strike. As the way of the study, 'Bird Strike Preventing Information' had been written and distributed every week by the ASA to flight units in the ROKAF during the period of the study. Through enhanced pilots' perceptual ADM competence, there was a noticeable number of reduction in bird strike incident compared to previous years of the experimental study.

• 대한환경공학회지
• /
• 제29권1호
• /
• pp.98-105
• /
• 2007

본 연구에서는 초음파 cavitation을 이용한 슬러지의 전처리가 슬러지의 가용화와 혐기성 소화조의 운전효율에 미치는 영향을 바이오가스 생성을 중심으로 알아보고, 전처리의 효과를 ADM1 (Anaerobic Digestion Model No. 1)을 이용하여 시뮬레이션 한 결과와 비교하였다. 실험결과, 초음파 전처리는 하수슬러지의 탈수성을 감소시키며 SCOD의 생성을 증가시키는 것으로 나타났다. 실험실 규모의 혐기성 소화조는 초음파 미처리 슬러지(control)와 30분, 60분, 90분간 처리된 슬러지를 대상으로 4 계열로 운전되었으며, 그 처리효율은 TCOD의 경우, 각각 31.9%, 37.9%, 38.5%, 42.2%의 제거효율을 나타내었다. 또한 TS의 감량효율은 각각 15.9%, 20.8%, 21.5%, 24.1%로 평가되어 전처리에 따른 제거효율의 증가를 확인 할 수 있었고, 슬러지 부하와 전처리 시간의 증가에 따라서 바이오가스의 생성량도 증가하는 것으로 나타났다. 슬러지 전처리에 따른 혐기성 소화조의 운전결과와 시뮬레이션 결과의 추이는 전반적으로 일치하는 경향을 나타내었다.

• 한국임상수의학회지
• /
• 제27권3호
• /
• pp.299-301
• /
• 2010

광범위한 사강과 함께 치유가 지연된 개의 창상에 무세포성 진피기질(Acellular human dermal matrix, ADM)을 적용하였다. 이 치료는 피하 사강을 갖는 창상과 근육면 사이의 창상에 특히 효과적인 치료법이었다. 본 증례에서 ADM 적용시 사강의 크기와 삼출물의 양이 급격히 줄어들었다. 사강이 사라지는 데까지의 평균 기간은 약 10일 이었다. 또한, 이 증례에서는 중증의 염증과 같은 복합증은 확인되지 않았다.

• 한방안이비인후피부과학회지
• /
• 제30권3호
• /
• pp.46-61
• /
• 2017

Objectives : Allergic contact dermatitis(ACD) is a type IV delayed hypersensitivity reaction that results from cumulative exposures and subsequent sensitization to an environmental chemical. Lonicerae Caulis(LC) can clear away heat and relieve toxin, disperse wind and heat, dredge the channel. The present study was designed to investigate the effects of LC on allergic contact dermatitis(ACD) induced by 2,4-dinitrochlorobenzene(DNCB) in mice. Methods : In this experiment, the effects of LC on changes in body weights, ear and dorsum skin thicknesses, ear weights, clinical aspects on the dorsum skin, histopathological changes, spleen/body ratio, cytokines were investigated. In addition, the effects on proliferations of splenocytes were also investigated in vitro and vivo study. Results : LC spread(SPR) group and LC spread and administered(SPR+ADM) group showed diminished ear thicknesses. In SPR+ADM group, ear weights were lowered significantly compared to contact dermatitis control(CTL) group. LC treatment diminished erythema, desquamation and keratosis which were induced by repeated painting of DNCB. In histopathological observation, spongiosis and edema were diminished in SPR and SPR+ADM group. In cytokines, SPR+ADM group were increased in IL-10, and SPR and SPR+ADM group were decreased in TNF-${\alpha}$ compared with control group. Conclusions : These data suggest that LC can decrease symptoms of ACD, then LC is useful to treat patient with ACD.

• Journal of Periodontal and Implant Science
• /
• 제54권1호
• /
• pp.25-36
• /
• 2024

Purpose: Mucogingival defects (MGDs), such as dental root recessions, decreased vestibular depth, and absence of keratinized tissues, are commonly seen in dental clinics. MGDs may result in functional, aesthetic, and hygienic concerns. In these situations, autogenous soft tissue grafts are considered the gold-standard treatment. This study compares the healing process of free gingival grafts (FGGs) to bacterial cellulose matrix (BCM) and human acellular dermal matrix (ADM) seeded with fibroblasts from culture supplemented with platelet-rich plasma in a rat model. Methods: Surgical defects were made in rats, which received the following treatments in a randomized manner: group I, negative control (defect creation only); group II, positive control (FGG); group III, BCM; group IV, BCM + fibroblasts; group V, ADM; and group VI, ADM + fibroblasts. Clinical, histological, and immunological analyses were performed 15 days after grafting. Clinical examinations recorded epithelium regularity and the presence of ulcers, erythema, and/or edema. Results: The histological analysis revealed the degree of reepithelization, width, regularity, and presence of keratin. The Fisher exact statistical test was applied to the results (P<0.05). No groups showed ulcers except for group I. All groups had regular epithelium without erythema and without edema. Histologically, all groups exhibited regular epithelium with keratinization, and myofibroblasts were present in the connective tissue. The groups that received engineered grafts showed similar clinical and histological results to the FGG group. Conclusions: Within the limitations of this study, it was concluded that BCM and ADM can be used as cell scaffolds, with ADM yielding the best results. This study supports the use of this technical protocol in humans.

• Archives of Plastic Surgery
• /
• 제51권1호
• /
• pp.52-61
• /
• 2024

Background Although prepectoral implant-based breast reconstruction has recently gained popularity, dual-plane reconstruction is still a better option for patients with poor-quality mastectomy skin flaps. However, shoulder morbidity is aggravated by subpectoral reconstruction, especially in irradiated patients. This study aimed to demonstrate shoulder exercise improvement in subpectoral reconstruction by delayed prepectoral conversion with an acellular dermal matrix (ADM) inlay graft technique at the time of expander-to-implant exchange after irradiation. Methods Patients with breast cancer treated for expander-to-implant exchange after subpectoral expander insertion and subsequent radiotherapy between January 2021 and June 2022 were enrolled. An ADM inlay graft was inserted between the pectoralis major muscle and the previously inserted ADM. The ADM was sutured partially overlapping the pectoralis muscle from the medial side with the transition part, to the muscle border at the lateral side. Perioperative shoulder joint active range-of-motion (ROM) for forward flexion, abduction, and external rotation was also evaluated. Results A total of 35 patients were enrolled in the study. Active shoulder ROM significantly improved from 163 degrees preoperatively to 176 degrees postoperatively in forward flexion, 153 to 175 degrees in abduction, and 69 to 84 degrees in external rotation. There was no difference in patient satisfaction regarding the final outcome between the conventional prepectoral reconstruction group and the study group. Conclusion Shoulder exercises in irradiated patients who underwent subpectoral reconstruction were improved by delayed prepectoral conversion using an ADM inlay graft. It is recommended that subpectoral reconstruction not be ruled out due to concerns regarding muscle contracture and shoulder morbidity in radiation-planned patients with poor mastectomy skin flaps.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1993년도 제2회 신약개발 연구발표회 초록집
• /
• pp.38-38
• /
• 1993

DA-125투여에 따라 심근 조직내 지질과산화산물이 증가하였으나 동일용량의 ADM투여군보다는 적게 증가하였다. 적출십장기능 시험과 심전도 측정시 DA-125 투여와 관련된 특이한 변화는 관찰되지 않았으나 심장조직의 병리학적 검사에서는 심근세포의 약한 과립화 현상이 관찰되었다. 반면 ADM 투여군에서는 현저한 적출심장 기능의 저하, 특징적인 심전도변화 및 심근세포내 공포령성 및 과립화등의 변화가 나타났다. 조혈기독성시험에서는 DA-125와 ADM투여에 따라 백혈구 수의 감소가 가장 컸으며 백혈구 수는 약물투여후 4일째 최저치를 나타냈다가 8일후부터 회복하기 시작하여 약물투여 16일후에는 투여전치로 회복되었다. DA-125와 ADM의 조혈기독성의 pattern은 같으나 독성의 정도는 DA-125가 약한 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.348-348
• /
• 2008

In recent, the concept of system-on-package (SOP) for highly integrated multifunctional systems has been paid attention to for the miniaturization and high frequency of electronic devices. In order to realize SOP, co-integration of passive devices, such as capacitors, resistors and inductors, and active devices should be achieved. If ceramic thick films can be grown at room temperature, we expect to be able to overcome many problems in conventional fabrication processes. So, we focused on the aerosol deposition method (ADM) as room temperature fabrication technology. ADM is a novel ceramic coating method based on the Room Temperature Impact Consolidation (RTIC) phenomena. This method has a wide range potential for fabrication of co-integration of passive and active devices. In this paper, I will present the future potential of ADM introducing various ceramic dielectric thick films for the integration of electronic ceramics.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1424-1428
• /
• 1999

This paper presents a mathematical decomposition coordination method to implementing the distributed optimal power flow (OPF), wherein a regional decomposition technique is adopted to parallelize the OPT. The proposed approach is based on the Alternating Direction Method (ADM), a variant of the conventional Augmented Lagrangian approach, and makes it possible the independent regional AC-OPF for each control area while the global optimum for the entire system is assured. This paper is an extension of our previous work based on the auxiliary problem principle (APP). The proposed approach in this paper is a completely new one, however, in that ADM is based on the Proximal Point Algorithm which has long been recognized as one of the attractive methods for convex programming and min-max-convex-concave programming. The proposed method was demonstrated with IEEE 50-Bus system.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.70-74
• /
• 2012

Copper die casting motor (CDM) has a better design flexibility than aluminium die casting motor (ADM) because of the higher conductivity of copper. However, CDM has an economic and manufacturing weak point due to high copper price and high melting temperature compared to ADM. This paper describes a comparison of the design parameters, specifications, performances and material cost between CDM and ADM of 5.5kW_6P.