• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.22-31
• /
• 2008

Cognitive radio should imply a proper sensing technique for detecting the presence of licensed users to identify the unused spectrum holes. Besides this, this information should also be used to opportunistically provide communication among secondary users. At the same time the performance of the primary user should not be declined by the secondary users. The detection of licensed users may be significantly difficult for shadowing effect. To prevail over this problem cooperative spectrum sensing, In which the combined observation information gained by multiple secondary users is employed to achieve higher performance of detection, has been inspected. However, the primary challenge of cooperative sensing lays in its ability to detect the presence of licensed user quickly and accurately. In this paper, we have used UltraWideBand (UWB) to detect the presence of licensed users and transmit the sensing information among the nodes of the network. UWB has the capability of transmitting data at a very high rate. It is unique in co-existence capability with narrow band systems. Here, we have shown that the detection probability of licensed user is improved by means of transmitting the spectrum sensing information via UWB. We also have analyzed the throughput of the proposed technique and compared the result with existing sensing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.3
• /
• pp.67-76
• /
• 2020

With the fast development in wireless communications and vehicular technologies, vehicular ad hoc networks (VANETs) have enabled to deliver data between vehicles. Recently, VANETs introduce a Vehicular Cloud (VC) model for collaborating to share and use resources of vehicles to create value-added services. To construct a VC, a vehicle should search vehicles that intend to provide their own resource. The single-hop search cannot search enough provider vehicles due to a small coverage and non-line-of-sights of communications. On the other hand, the multi-hop search causes very high traffics for large coverage searching and frequent connection breakages. Recently, many Roadside Units (RSUs) have been deployed on roads to collect the information of vehicles in their own coverages and to connect them to Internet. Thus, we propose a RSU-aided vehicular resource search and cloud construction mechanism in VANETS. In the proposed mechanism, a RSU collects the information of location and mobility of vehicles and selects provider vehicles enabled to provide resources needed for constructing a VC of a requester vehicle based on the collected information. In the proposed mechanism, the criteria for determining provider vehicles to provide resources are the connection duration between each candidate vehicle and the requester vehicle, the resource size of each candidate vehicle, and its connection starting time to the requester vehicle. Simulation results verify that the proposed mechanism achieves better performance than the existing mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.417-420
• /
• 2006

UPnP presents home network middleware for local home electrical appliances basedon internet protocols that is available access and control electrical appliances just in local home network. Itis designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks in the home, a small business, public spaces, or attached to the Internet. In this paper, Internet Gateway expands UPnP IGD(Internet Gateway Device) DCP(Device Control protocol) and UPnP IGP Bridge for Internet Home Network Electrical Appliance Control. UPnP IGD DCP is configurable initiation and sharing of internet connections, advanced connection-management features, management of host configuration service, and supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge search for local home network devices by sending control messages. Control Point of UPnP Bridge search for devices of interest on the network and can control or be controlled all of functions by IGD DCP with control commands. Outside client, approach to UPnP IGD DCP, send control messages UPnP Bridge, and invoke each UPnP device. As a result, Electrical Appliance of Home Network base on UPnP, can control and be controlled via the Internet like ones in the one Home Network without modification of existing UPnP.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1021-1030
• /
• 2010

In the sensor network, many tiny nodes construct Ad-Hoc network using wireless interface. As this type of system consists of thousands of nodes, managing each sensor node in real world after deploying them is very difficult. In order to install the sensor network successfully, it is necessary to verify its software using a simulator beforehand. In fact Sensor network simulators require high fidelity and timing accuracy to be used as a design, implementation, and evaluation tool of wireless sensor networks. Cycle-accurate, instruction-level simulation is the known solution for those purposes. In this paper, we developed an instruction-level sensor network simulator for Telos sensor node as named TeloSlM. It consists of MSP430 and CC2420. Recently, Telos is the most popular mote because MSP430 can consume the minimum energy in recent motes and CC2420 can support Zigbee. So that TeloSlM can provide the easy way for the developers to verify software. It is cycle-accurate in instruction-level simulator that is indispensable for OS and the specific functions and can simulate scalable sensor network at the same time. In addition, TeloSlM provides the GUI Tool to show result easily.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.481-504
• /
• 2010

Wireless smart sensor networks (WSSNs) have been proposed by a number of researchers to evaluate the current condition of civil infrastructure, offering improved understanding of dynamic response through dense instrumentation. As focus moves from laboratory testing to full-scale implementation, the need for multi-hop communication to address issues associated with the large size of civil infrastructure and their limited radio power has become apparent. Multi-hop communication protocols allow sensors to cooperate to reliably deliver data between nodes outside of direct communication range. However, application specific requirements, such as high sampling rates, vast amounts of data to be collected, precise internodal synchronization, and reliable communication, are quite challenging to achieve with generic multi-hop communication protocols. This paper proposes two complementary reliable multi-hop communication solutions for monitoring of civil infrastructure. In the first approach, termed herein General Purpose Multi-hop (GPMH), the wide variety of communication patterns involved in structural health monitoring, particularly in decentralized implementations, are acknowledged to develop a flexible and adaptable any-to-any communication protocol. In the second approach, termed herein Single-Sink Multi-hop (SSMH), an efficient many-to-one protocol utilizing all available RF channels is designed to minimize the time required to collect the large amounts of data generated by dense arrays of sensor nodes. Both protocols adopt the Ad-hoc On-demand Distance Vector (AODV) routing protocol, which provides any-to-any routing and multi-cast capability, and supports a broad range of communication patterns. The proposed implementations refine the routing metric by considering the stability of links, exclude functionality unnecessary in mostly-static WSSNs, and integrate a reliable communication layer with the AODV protocol. These customizations have resulted in robust realizations of multi-hop reliable communication that meet the demands of structural health monitoring.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.4
• /
• pp.41-52
• /
• 2010

Message authentication is an essential security element in vehicular ad-hoc network(VANET). For a secure message authentication, integrity, availability, privacy preserving skill, and also efficiency in various environment should be provided. RAISE scheme has been proposed to provide efficient message authentication in the environment crowded with lots of vehicles and generally considered to be hard to provide efficiency. However, as the number of vehicles communicating in the area increases, the overhead is also incurred in proportion to the number of vehicles so that it still needs to be reduced, and the scheme is vulnerable to some attacks. In this paper, to make up for the vulnerabilities in dense vehicular communication network, we propose a more secure and efficient scheme using a process that RSU(Road Side Unit) transmits the messages of neighbor vehicles at once with Bloom Filter, and timestamp to protect against replay attack. Moreover, by adding a handover function to the scheme, we simplify the authentication process as omitting the unnecessary key-exchange process when a vehicle moves to other area. And we confirm the safety and efficiency of the scheme by simulating the false positive probability and calculating the traffic.

• Journal of Broadcast Engineering
• /
• v.8 no.4
• /
• pp.325-338
• /
• 2003

Video adaptation in response to dynamic resource conditions and user preferences is required as a key technology to enable universal multimedia access (UMA) through heterogeneous networks by a multitude of devices In a seamless way. Although many adaptation techniques exist, selections of appropriate adaptations among multiple choices that would satisfy given constraints are often ad hoc. To provide a systematic solution, we present a general conceptual framework to model video entity, adaptation, resource, utility, and relations among them. It allows for formulation of various adaptation problems as resource-constrained utility maximization. We apply the framework to a practical case of dynamic bit rate adaptation of MPEG-4 video streams by employing combination of frame dropping and DCT coefficient dropping. Furthermore, we present a descriptor, which has been accepted as a part of MPEG-21 Digital Item Adaptation (DIA), for supporting terminal and network quality of service (QoS) in an interoperable manner. Experiments are presented to demonstrate the feasibility of the presented framework using the descriptor.