• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.23-28
• /
• 2013

Objective: The purpose of this study was to evaluate the effect of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on the shear bond strength (SBS) of brackets bonded to non-demineralized teeth with either phosphoric acid etching or self-etching primer. Methods: Sixty human premolars were randomly assigned to 1 of 4 treatment groups (n = 15 each): phosphoric acid etching (group 1); self-etching primer (group 2); CPP-ACP for 2 weeks + phosphoric acid etching (group 3), and CPP-ACP for 2 weeks + self-etching primer (group 4). After bonding of the maxillary premolar metal brackets, specimens were subjected to shear forces in a testing machine. Scanning electron microscopy was used to observe etching patterns on the enamel surfaces of all teeth. A 2-way analysis of variance was used to test for effects of CPP-ACP and etching system on SBS. Results: Significantly higher mean SBSs were observed in groups subjected to phosphoric acid etching (i.e., groups 1 and 3; p < 0.05). On the other hand, SBSs did not appear to be influenced by CPP-ACP (i.e., groups 3 and 4; p > 0.05). We observed a uniform and clear etched pattern on the enamel surface of the phosphoric acid etching groups. Conclusions: CPP-ACP does not significantly affect the SBS of orthodontic brackets bonded to non-demineralized teeth, regardless of which adhesive method is used to bond the brackets.

• Journal of Hospice and Palliative Care
• /
• v.26 no.2
• /
• pp.42-50
• /
• 2023

Purpose: The purpose of this study was to identify barriers to effective conversations about advance care planning (ACP) and palliative care reported by health care and community-based service providers in Massachusetts, USA. Methods: This qualitative research analyzed open-ended responses to two survey questions, inquiring about perceived barriers to having conversations about ACP and palliative care with patients and consumers. Data were collected between November 2017 and June 2019 from nine organizations in Massachusetts, including health care provider organizations, health insurers, community-based organizations, and a nursing education institution. Two researchers reviewed and coded the responses and identified common themes inductively. Results: Across 142 responses, primary barriers to ACP included hesitation and lack of understanding and knowledge, discomfort and resistance among service providers, lack of staff knowledge, difficulties with followup, and differences in ACP policies across regions. Common barriers to palliative care were misconceptions about palliative care and lack of knowledge, service providers' lack of preparedness, and limited policy support and availability. Challenges relevant to both ACP and palliative care were fear and discomfort around serious illness discussions, lack of knowledge and awareness, discussions that occur too late, and cultural and language barriers. Conclusion: Health care practitioners and community-based professionals reported consumer-, service provider-, and system-level barriers to facilitating conversations about ACP and palliative care with patients experiencing serious illness. There is a need for more tools and support to strengthen service providers' ACP and palliative care competencies and to promote a structured approach to health care planning conversations.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1995.04a
• /
• pp.46-49
• /
• 1995

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.32-36
• /
• 1985

Megagametophyte tissues of Pinus densiflora were subjected to study the inheritance of acid phosphatase (ACP), alcohol dehydrogenase (ADH) and catalase (CAT) isozymes by starch gel zone-electrophoresis. At least three or four zones were segregated for ACP isozyme. However, as one isozyme of ACP-A zone was separated clearly, only that isozyme was analysed. Five isozyme phenotypes (A1-A5), observed in ACP-A zone, were segregated to a simple Mendelian ratio, suggesting that these are controlled by five codominant alleles existed at ACP-A locus. Two zones of activity were segregated in the gels after staining for ADH, the more anodal zone (ADH-A) of the two was invariant in our materials. Three isozyme phenotypes (B1-B3) were observed in ADH-B zone and these variants showed a 1:1 segregation pattern, suggesting that each variant is controlled by three codominant alleles at ADH-B locus. A total of five isozyme phenotypes, composed of multiple bands, were observed in CAT isozyme. The segregation of these phenotypes in heterozygous trees did not show any significant deviation from a 1:1 segregation. Therefore, the genetic control of CAT isozyme in Pinus densiflora seeds seems to be based on a single locus (CAT-A) with Five codominant alleles ($A_1-A_5$).

• Journal of the Korean Society of Safety
• /
• v.24 no.6
• /
• pp.63-71
• /
• 2009

In order to improve flame retardancy, the halogen free organic melamine phosphate(M-P) flame retardant was synthesized from melamine and phosphoric acid by the reaction of precipitation. The ignition test was carried out preparing hybrid flame retardant compound($H_bFRC$) consisting of organic M-P and inorganic Mg$(OH)_2$ as a flame retardant in the polyolefin resins. The flame retardancy and mechanical properties of flame retardant aluminum composite panel($H_bFRC$-ACP) were performed to investigate the possibility of the composite material, which was contained M-P, as a inner core for $H_bFRC$-ACP. For this study, the results of ignition test indicate that a char formation and drip suppressing effect, and combustion time reduced as the content of M-P increased. The limited oxygen index(LOI) values were measured 17.4vol% and 31.5vol% for LDPE only and $H_bFRC$-3(M-P content: 15wt%), respectively. And it was verified that the $H_bFRC$-3 was needed more oxygen quantity with the increase of M-P content when it combustion. Also, the results from thermogravimetric analysis were observed endothermic peak at $350^{\circ}C$ and $550^{\circ}C$, it was confirmed predominant thermal stability though the wide temperature range by the mixture of M-P and Mg$(OH)_2$. The LDPE-ACP (using only LDPE as a inner core), $35.13kW/m^2$ of heat release rate(HRR) and 13.43MJ/m2 of total heat release(THR) were measured while the $H_bFRC$-ACP, $10.44kW/m^2$ of HRR and 1.84MJ/m2 of THR were measured by results of cone calorimeter test. In case of $H_bFRC$-ACP, the average gas emission amount of CO and $CO_2$ could be decreased down to 25% and 20%, respectively, in comparison with LDPE-ACP. The mechanical properties such as tensile strength, bending strength and adhesion strength of $H_bFRC$-ACP were revealed slightly high values $54N/mm^2$, $152N/mm^2$ and 120N/25mm, respectively, compared with LDPE-ACP. It was confirmed that flame retardancy was improved with the synergy effect because of char formation by M-P and hydrolysis by Mg$(OH)_2$. The result of this study suggest that $H_bFRC$ can be applied for an adequate halogen free flame retardant composite material as a inner core for ACP.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.840-845
• /
• 2004

The remote operation of the Advanced Spent Fuel Conditioning Process (ACP) is analyzed by using the 3D graphic simulation tools. Since the spent nuclear fuel, which is a high radioactive material, is processed in the ACP, the ACP equipment is operated in intense radiation fields as well as in a high temperature. Thus, the equipment is operated in a remote manner and should be designed with consideration for the remote handling and maintenance. Also suitable remote handling technology needs to be developed along with the design of the process concepts. For this we developed a graphic simulator, which provides the capability of verifying the remote operability of the ACP without the fabrication of the process equipment. In other words, by applying virtual reality to the remote maintenance operation, a remote operation task can be simulated in the graphic simulator, not in the real environment. The graphic simulator will substantially reduce the cost of the development of the remote handling and maintenance procedure as well as the process equipment, while at the same time developing a remote maintenance concept that is more reliable, easier to implement, and easier to understand.

• The Plant Pathology Journal
• /
• v.34 no.1
• /
• pp.59-64
• /
• 2018

Bacteriophages of Acidovorax citrulli, the causal agent of bacterial fruit blotch, were isolated from 39 watermelon, pumpkin, and cucumber leaf samples collected from various regions of Korea and tested against 18 A. citrulli strains. Among the six phages isolated, ACP17 forms the largest plaque, and exhibits the morphology of phages in the Myoviridae family with a head diameter of $100{\pm}5nm$ and tail length of $150{\pm}5nm$. ACP17 has eclipse and latent periods of $25{\pm}5min$ and $50{\pm}5min$, respectively, and a burst size of 120. The genome of ACP17 is 156,281 base pairs with a G + C content of 58.7%, 263 open reading frames, and 4 transfer RNA genes. Blast search and phylogenetic analysis of the major capsid protein showed that ACP17 has limited homology to two Stentrophomonas phages, suggesting that ACP17 is a new type of Myoviridae isolated from A. citrulli.

• BMB Reports
• /
• v.36 no.5
• /
• pp.505-507
• /
• 2003

One of the small proteins from Helicobacter pylori, acyl carrier protein (ACP), was investigated by NMR. ACP is related to various cellular processes, especially with the biosynthesis of fatty acid. The basic NMR resonance assignment is a prerequisite for the validation of a heterologuous protein interaction with ACP in H.pylori. Here, the results of the backbone $^1H$, $^{15}N$, and $^{l3}C$ resonance assignments of the H. pylori ACP are reported using double- and triple-resonance techniques. About 97% of all of the $^1HN$, $^{15}N$, $^{13}CO$, $^{13}C{\alpha}$, and $^{13}C{\beta}$ resonances that cover 76 of the 78 non-proline residues are clarified through sequential- and specific-assignments. In addition, four helical regions were clearly identified on the basis of the resonance assignments.

• Journal of the Society of Disaster Information
• /
• v.12 no.4
• /
• pp.432-439
• /
• 2016

To make a model of a Impact/Blast resistant composite material and perform the analysis, material properties of the composite material are required. In order to obtain such a property value, it is necessary to input the result obtained by performing a lot of material tests by the calculation formula of the situation, and there is a lot of difficulty in the case of a special purpose material which is not a general material. In this study, modeling and structural analysis of composite fiber panels for protection and explosion - proofing were performed in ACP(ANSYS Composite PrePost) and AUTODYN by applying the application properties of composites provided in Ansys Workbench environment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.985-990
• /
• 2003

In order to demonstrate Advanced Spent Fuel Conditioning Process (ACP), shielding facilities such as hot cell suitable to handling radionuclides and process property will be necessary. But the construction of new facilities needs much money, man-power and time, it is now scheduled to remodel the hot cell, which has already been installed and maintained at Irradiated Material Experiment Facility (IMEF) in the Korea Atomic Energy Research Institute (KAERI). The basic structure and concrete shield wall of hot cell partly have been constructed on the base floor in IMEF building in current status. And hot cell after remodeling will be used for carrying out the lab-scale experiment of ACP. The hot cell was built in accordance with 35 curies of fe-59(1.2 MeV) as design criteria of radiation dose limit. But the radioactive source of ACP is expected to be much higher than design criteria of IMEF, shielding ability of the hot cell in the current status is unsatisfactory to the hot test of ACP. Therefore shield wall shall be reinforced with heavy concrete, steel or lead. In this paper, dose rates are calculated according to ACP source, shielding materials, etc., and reinforcement structures are determined considering the current situation of hot cells, installation of shield windows and the easiness of work.