• 제목/요약/키워드: AC7A

검색결과 880건 처리시간 0.031초

Monitoring of Initial Stages of Atmospheric Zinc Corrosion in Simulated Acid Rain Solution under Wet-dry Cyclic Conditions

  • EL-Mahdy, Gamal A.;Kim, Kwang B.
    • Corrosion Science and Technology
    • /
    • 제3권6호
    • /
    • pp.251-256
    • /
    • 2004
  • Exposure of zinc samples in simulated acid rain solution (SARS) was investigated under a periodic wet-dry conditions using an AC impedance technique. The periodic wet and dry exposure consisted of the immersion of zinc samples in SARS for one hour followed by exposure to 7 hours drying at 60% RH. Phases of the corrosion products were indentified by X-ray diffraction (XRD). The influence of relative humdiity (RH), temperature, and surface inclination on the atmospheric corrosion of zinc is described. The reciprocal of polarization resistance (1/Rp) decreases rapidly during the initial stages then slowly and eventually attains a steady state as exposure time progresses. The average of reciprocal of polarization resistance per cycle, (ARPR) was calculated and found to decrease as number of exposure cycle increases. An increase of temperature enhances the corrsion rate of zinc. The values of ARPR, of a sample inclined at 30 o are lower than those for a sample oriented horizontally. The experiment result shows a pronounced dependence of reciprocal of polarization resistance on RH. Exposure in the presence of carbonate anions gives rise to more protective corrosion products than in nitrate anion solution. The corrosion mechanism during the initial stages of atmospheric zinc corrosion under wet-dry cyclic conditions is suggested.

A study on the squeeze casting of Al-7.0Si-0.4Mg alloy for fuel system parts

  • Kim Soon-Ho;Kim Seong-Soo
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제6권3호
    • /
    • pp.56-59
    • /
    • 2005
  • Aluminum alloy casting is gaining increased acceptance in automotive and electronic industries and especially, squeeze casting is the most efficient method of mass manufacturing of such parts. In this study, the microstructures and mechanical properties of Al-7.0Si-0.4Mg(AC4C) alloy fabricated by squeeze casting process for development of fuel system parts (fuel rail) are investigated. The microstructure of squeeze cast specimen was composed of eutectic structure aluminum solid solution and $Mg_2Si$ precipitates. The tensile strength of as-solid solution treatment Al-7.0Si-0.4Mg alloy was 298.5MPa. It was found that Al-7.0Si-0.4Mg alloy had good corrosion resistance in electrochemical polarization test.

낮은 스위칭 손실을 가지는 고성능 AC-PDP 구동 회로에 관한 연구 (High Performance AC-PDP Sustain Driver with Low switching Loss)

  • 강필순;박성준;박한웅;김철우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
    • /
    • pp.50-56
    • /
    • 2002
  • When the plasma panel is used as a display, frequent discharging are made to occur by alternatively charging each side of the panel to a critical voltage, which causes repeated gas discharges to occur. In this paper, an efficient sustain driver is proposed to achieve a faster rise-time in order to be suitable to widely used ADS driving method. The proposed circuit increases an operational margin up to 20 % compared with conventional approaches improving the recovery efficiency regardless of the variation of panel capacitance. Thanks to the increased operational margin, the brightness decrease problem can be solved without a limitation to sustain pulse width. The principle of operation, and features are illustrated, and verified on a 7.5 inch diagonal panel at 200 kHz operating frequency - based on experimental prototype.

  • PDF

Analysis of Cu in Mezcal Commercial Samples using Square Wave Anodic Stripping Voltammetry

  • Salinas, Gerardo;Ibanez, Jorge G.;Vasquez-Medrano, Ruben;Frontana-Uribe, Bernardo A.
    • Journal of Electrochemical Science and Technology
    • /
    • 제9권4호
    • /
    • pp.276-281
    • /
    • 2018
  • High concentration of copper in mezcal, a representative Mexican spirituous alcoholic beverage, is a serious problem due to the damage that it may cause to human health. A cyclic voltammetry and square wave anodic stripping voltammetry study of copper (II) in three commercial mezcal samples based on glassy carbon electrode response was undertaken. The analysis was developed using a simulated matrix solution ($EtOH/H_2O$ (1:1), 0.1 M $LiClO_4$ and AcOH/AcONa 0.05 M/0.008 M), with Cu (II) concentrations in the range 0 - 1 ppm. Direct electrochemical analysis of mezcal samples was complicated by the presence of different organic compounds in the matrix. The analytical signal of Cu (II) in the spirituous was notably improved and the interferences caused by organic compounds were minimized, by diluting the mezcal samples 10% with $EtOH/H_2O$ (1:1) solution. An efficient quantification of Cu (II) was obtained from the calibration curve by the SWASV and using the internal standard method (Cd (II)) in commercial samples (1.2-6.7 ppm); the results were correlated satisfactorily with the values obtained by AAS.

GNP법을 이용한 고체산화물 연료전지의 공기극용 La0.75Sr0.25FeO3의 제조 및 특성 (Synthesis and Characterization of La0.75Sr0.25FeO3 Used as Cathode Materials for Solid Oxide Fuel Cell by GNP Method)

  • 박주현;손희정;임탁형;이승복;윤기석;윤순길;신동열;송락현
    • 전기화학회지
    • /
    • 제10권1호
    • /
    • pp.7-13
    • /
    • 2007
  • Glycine Nitrate Process(GNP)를 이용하여 $La_{0.75}Sr_{0.25}FeO_3$를 합성하였다. 이때, GNP의 글리신의 함량은 화학양론식으로 계산하여 3.17mol을 첨가하였다. ICP-AES분석으로 각각의 조성 함량을 조사하고, XRD, SEM분석으로 합성된 분말의 결정성과 입자크기를 분석하였다. 이렇게 분석한 분말은 일축가압 성형으로 펠렛을 제조하였으며, 이 시편은 $1200^{\circ}C$에서 소결하였다. 소결된 시편은 아르키메데스 법을 이용하여 소결밀도를 측정히였다. 전기화학적 성능을 평가하기 위해 AC impedance spectroscopy로 측정하였으며, GNP 법으로 합성된 LSF가 기존의 LSM 보다 낮은 Ohmic resistance및 Polarization resistance를 보임을 확인하였다. 또한 합성된 LSF를 양극으로 사용하여 연료극 지지체식 고체산화물 연료전지의 단위전지를 제작하였으며, 그 성능은 $750^{\circ}C$에서 $342mW/cm^2(0.7V,\;488mA/cm^2)$을 나타내었다. 마지막으로 임피던스 분석에 의하여 단위전지의 전기화학적 분극저항을 평가하였다.

머신러닝을 사용한 서리 예측 연구 (A study on frost prediction model using machine learning)

  • 김효정;김삼용
    • 응용통계연구
    • /
    • 제35권4호
    • /
    • pp.543-552
    • /
    • 2022
  • 서리는 표면 근처의 공기의 이슬점 온도가 빙점 이하일 때 수증기가 승화, 응축되어 땅이나 물체에 얼게 되는 작은 얼음 결정체이다. 서리가 내리면 농작물이 직접 피해를 입는다. 농작물이 낮은 온도에 접촉하면 조직이 얼어서 세포막이나 엽록체가 딱딱해지고 파괴되거나 건조한 세포가 죽습니다. 2020년 7월, 세계 최대 커피 생산국인 브라질 미나스제라이스 주에 갑작스러운 영하의 날씨와 서리가 내려 지역 커피 나무의 약 30%가 피해를 입었다. 이로 인해 피해로 커피값이 크게 올랐고, 피해가 심각한 농가는 농작물이 회복되기까지 3년이 걸리기 때문에 2024년에야 커피를 생산할 수 있다. 본 논문에서는 심한 서리가 내리는 것을 방지하기 위해 기상청이 제공하는 서리 발생 데이터와 기상관측 데이터를 이용해 서리를 예측하려고 했다. 관측 지점의 고도 및 풍속, 온도, 습도, 강수량, 흐림 등의 기상 요인을 반영하여 모델을 구축하였다. XGB, SVM, Random Forest, MLP 모델을 사용하여 다양한 하이퍼 파라미터를 학습 데이터로 적용하여 각 모델에 가장 적합한 모델을 선택하였다. 마지막으로, 결과는 테스트 데이터에서 정확도(acc)와 중요 성공 지수(CSI)로 평가되었다. XGB는 90.4%의 acc와 64.4%의 CSI로 다른 모델에 비해 최고의 모델이었고, SVM은 89.7%의 acc와 61.2%의 CSI로 그 뒤를 이었다. 랜덤 포레스트와 MLP는 약 89%의 acc와 약 60%의 CSI로 비슷한 성능을 보였다.

Polymer Electrolyte Membrane Fuel Cell 시스템의 환경 전과정평가 (Environmental Life Cycle Assessment (LCA) of Polymer Electrolyte Membrane Fuel Cell (PEMFC) System)

  • 김형석;홍석진;허탁
    • 한국수소및신에너지학회논문집
    • /
    • 제29권1호
    • /
    • pp.111-116
    • /
    • 2018
  • The environmental impacts of a 1 kW polymer electrolyte membrane fuel cell (PEMFC) system are quantitatively assessed by performing a Life Cycle Assessment (LCA) study. A PEMFC system produces electricity and heat simultaneously, so an appropriate allocation of associated inputs and outputs is performed between the electricity and heat produced. The environmental impacts of the PEMFC system on the impact categories such as global warming (GW), abiotic depletion (AD), acidification (AC), and eutrophication (EU) are assessed from the life cycle impact assessment. The impact indicator results of the impact assessment on these impact categories are obtained as $3.70E-01kg\;CO_2\;eq./kWh$, 1.86E-03 kg Sb eq./kWh, $4.09E-04kg\;SO_2\;eq./kWh$, and $1.88E-05kg\;PO_4{^{3-}}/kWh$, respectively. For all impact categories studied the most influential stage is the operation stage, which accounts for 98.8%, 98.7%, 70.3%, and 62.3% of the total impact on GW, AD, AC, and EU, respectively. For the impact categories of AD, AC, and EU, most of the environmental impacts during the operation stage is attributed to the production of city gas. However, for the impact category of GW, $CO_2$ emission from the reforming process of city gas is the main reason for the largest contribution of the operation stage to the total impact results.

천장관절가동술 후 수정된 벽 스쿼트 운동이 정상성인의 균형에 미치는 영향 (The Effects of Modified Wall Squat Exercise after Sacro­Iliac Joint Mobilization on Balance in Normal Adults)

  • 공원태
    • 융합정보논문지
    • /
    • 제10권7호
    • /
    • pp.160-167
    • /
    • 2020
  • 본 연구는 정상 성인에게 있어 수정된 벽 스쿼트 운동과 천장관절가동술이 정상성인의 균형능력에 미치는 영향을 연구하고자 실시하였다. 34명의 대상자를 선발하여 실험군 17명(여자 10명, 남자 7명) 또는 대조군 17명(여자 10명, 남자 7명)으로 무작위 배치하였으며, 실험군은 6주간 주 3회, 회당 3세트의 수정된 벽 스쿼트 운동과 천장관절가동술을 받았다. 실험군과 대조군의 실험 전과 실험 후 그룹 내 균형을 비교한 결과 실험군은 체중분포지수와 우측 발 뒷부분과 발 앞부분(힘 판 CD), 좌, 우 발 뒷부분(힘 판 AC)과 좌측 발 뒷부분과 우측 발 앞부분(힘판 AD)에서 통계적 유의성이 있었고, 대조군은 전체 항목에서 통계적 유의성이 없었다. 본 연구에서 수정된 벽 스쿼트 운동과 천장관절가동술이 정상성인의 균형능력에 미치는 영향을 확인하였다.

수은 원자에서의 공명 다광자 이온화 과정의 레이저 강도 의존성 (Laser Intensity Dependence in Resonant Multiphoton Ionization of Hg Atoms)

  • 한재민;정도영;차형기;김철중;이종민
    • 한국광학회지
    • /
    • 제1권1호
    • /
    • pp.7-11
    • /
    • 1990
  • 수은 원자 증기에 강한 레이저 광$(10-120GW/\textrm{cm}^2)$을 조사하여 수은 원자의 공명 다광자 이온화 과정을 연구하였다. 파장 560.7nm의 광자 4개를 흡수할 때 공명준위는 $6d ^1D_2$이다. 수은 증기압(0.1-3.0 Torr)과 레이저 파장(559-569nm)을 변화시키면서 큰 강도의 광원과 원자가 상호작용하여 생기는 AC Stark 이동과 line broadening의 변화를 조사하였고, 원자 밀도의 증가에 따라 이온화율의 증가가 둔화되다가 감소되는 것도 관측되었다. 이동계수 $\alpha$=0.6cm-1/GW/$\textrm{cm}^2$로 측정되었다. 특히, 이온화율의 레이저 강도 의존성을 나타내는 비선형 차수를 공명파장에서 측정한 결과 k=3을 얻었으며, 이론적인 결과와 비교하였다.

  • PDF

High Efficacy AC-PDP toward 10 lm/W

  • Choi, Kyung-Cheol;Lee, Seung-Tae;Shin, Nam-Hoon;Lee, Seong-Min;Song, Sang-Cheol;Yun, Jin-Bhum;Shin, Bhum-Jae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.7-12
    • /
    • 2006
  • The high efficacy concept, featuring in this study an auxiliary electrode and a 200 ${\mu}m$ coplanar gap, is applied to AC-PDPs with a stripe - type and a closed - type barrier rib, respectively. The roles of the pulses applied to the auxiliary electrode create additional excitation during the sustain period and reduce a discharge current that flows into the display cells. The efficacy of the proposed panel with the closed barrier rib has maximum values when the auxiliary pulse voltage is 50 volts and 80 volts for the Ne+4%Xe and Ne+20%Xe gas-mixtures, respectively. The maximum luminous efficacy is more than 10 lm/W in terms of the measurement of the discharges in VGA resolution ($540{\mu}m{\times}720{\mu}m$) and the green cells.

  • PDF