• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.111-119
• /
• 2022

This paper is about power transfer between heterogeneous systems in zero-energy buildings. Currently, electricity used in buildings, from renewable energy generation power in buildings, consists of alternating current networks. In order to use electricity, alternating current must be converted to direct current, which typically results in a loss of 10%. In order to solve this problem, research is needed to reduce power loss as much as possible by implementing both a DC network and an AC network in a zero-energy building. Therefore, in this paper, an inter-link converter capable of bidirectional power transfer between DC and AC networks applied to zero-energy buildings is developed. The structure of the inter-link converter to be developed was proposed and its feasibility was verified through simulations and experiments.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권7호
• /
• pp.384-390
• /
• 1999

This paper describes a new ac-to-dc power converter using a multilevel converter. A conventional multilevel ac-to-dc converter has large output dc filter capacitors. When a short circuit happens in a load, the stored energy in the capacitors should be discharged through the load with a high short circuit current. The high current may cause considerable damage to the capacitors and the load. The output dc capacitors of the proposed converter do not discharge even under load short circuit condition. In the case of a load short circuit, the capacitors become a floating state immediately and remain in the state. Then the stored capacitor energy is supplied to the load again as soon as the short circuit has been cleared. Therefore, the rising time of the load voltage can be significantly reduced. This feature satisfies the requirement of a power supply for a load with frequent short circuits. The proposed converter has the characteristics of a simplified structure, a reduced cost, weight, and volume compared with conventional power supplies with frequent output short circuits. Experimental results are presented to verify the usefulness of the proposed converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.526-527
• /
• 2008

본 논문은 MOSFET을 스위칭 소자로 사용한 350W급 2MHz 병렬공진 DC-AC 컨버터를 제안한다. 제안된 DC-AC 컨버터는 스위치의 전압스트레스 크기가 입력전압과 동일한 값으로 주어져 기존의 절연형 컨버터들 중에서 가장 낮은 전압 스트레스 값을 가지고 입력전압의 크기와 출력전력의 크기를 고려하여 풀-브리지 컨버터 토폴로지를 채택하였다. MOSFET 게이트 구동펄스는 50% 시비율이며, 구동트랜스포머를 사용하여 DC-AC 컨버터의 플로팅 스위치를 구동하였다. DC-AC 컨버터의 입력 전압은 50V, 부하저항은 $500{\Omega}$의 무유도 저항을 이용했다. 출력전압과 출력전류의 실효치는 각각 430V, 800mA 이고 효율은 82.5%에 도달하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.86-87
• /
• 2017

본 논문에서는 3상 22kW급 전기자동차 탑재형 충전기를 위한 단일단 AC-DC 컨버터를 제안한다. 제안하는 3상 단일단 AC-DC 컨버터는 제안하는 인터리빙 회로와 스위칭 기법으로 입력필터가 작고 넓은 전압 및 부하영역에서 소프트스위칭을 성취하여 높은 효율을 성취할 수 있으며 전해커패시터를 제거하고 필름커패시터를 사용하여 높은 수명 및 전력밀도를 기대할 수 있다. 또한 제안하는 컨버터는 단상 단일단 AC-DC 컨버터를 모듈구조로 구성하여 출력전류에 포함된 120Hz 맥동전류를 출력에서 상쇄시켜 저주파 성분이 없는 직류전류로 충전이 가능하다. 제안하는 3상 단일단 AC-DC 컨버터의 동작원리를 제시하고 시작품을 통해 본 논문의 타당성을 검증하였다.

• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.207-214
• /
• 2019

In this study, discrete-time domain analysis is proposed to investigate the input current of a buck AC/DC light-emitting diode (LED) driver. The buck power factor correction converter can operate in both discontinuous conduction mode (DCM) and continuous conduction mode (CCM). Two discontinuous and two continuous conduction operating modes are possible depending on which event terminates the conduction of the main switch in a switching cycle. All four operating modes are considered in the discrete-time domain analysis. The peak current-mode control with slope compensation is used to design a low-cost AC/DC LED driver. A slope compensation design of the buck AC/DC LED driver is described on the basis of a discrete-time domain analysis. Experimental results are presented to confirm the usefulness of the proposed analysis.

• 조명전기설비학회논문지
• /
• 제21권2호
• /
• pp.54-63
• /
• 2007

최근 저전압 대전류 출력 특성을 갖는 연료전지를 위한 새로운 발전시스템으로 주목받고 있다. 연료전지 발전시스템에서는 DC-DC 승압용 컨버터와 DC-AC 인버터가 필요하다. 그러므로 본 논문에서는 연료전지의 전압을 $380[V_{DC}]$로 승압하기 위한 절연형 DC-DC 컨버터와 단상 $220[V_{AC}]$로 변환하기 위한 LC필터를 가진 PWM 인버터로 구성된 전력변환장치를 제안하였다. 특히 제안한 고주파 절연형 ZVZCS PWM DC-DC 컨버터는 환류 다이오드를 포함한 탭부 인덕터 필터를 이용하여 순환 전류를 저감시켰으며, 스위치 및 변압기의 턴-온, 턴-오프시에 오버슈트 전압이나 과도현상이 발생하지 않는다. 그리고 넓은 출력 전압 조정에도 효율을 $93{\sim}97[%]$정도 얻을 수 있으며, 출력 부하전류의 변화에 대해 거의 일정한 출력 전압 특성을 가졌다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1006-1017
• /
• 2015

This paper presents a finite control set model predictive control (FCS-MPC) strategy for the AC/DC matrix converter used in grid-connected battery energy storage system (BESS). First, to control the grid current properly, the DC current is also included in the cost function because of input and output direct coupling. The DC current reference is generated based on the dynamic relationship of the two currents, so the grid current gains improved transient state performance. Furthermore, the steady state error is reduced by adding a closed-loop. Second, a Luenberger observer is adopted to detect the AC input voltage instead of sensors, so the cost is reduced and the reliability can be enhanced. Third, a switching state pre-selection method that only needs to evaluate half of the active switching states is presented, with the advantages of shorter calculation time, no high dv/dt at the DC terminal, and less switching loss. The robustness under grid voltage distortion and parameter sensibility are discussed as well. Simulation and experimental results confirm the good performance of the proposed scheme for battery charging and discharging control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.131-133
• /
• 2004

본 연구는 출력단에 패캐시터를 갖고 있는 AC 전류원으로부터, 밧데리 충전을 위한 새로운 AC/DC 컨버터 회로를 제안한다. 영전압과 영전류 스위칭을 사용하여 컨버터의 소형화 및 고효율화를 추구하였고, 풀브리지 MOSFET 정류기와 Buck-boost 컨버터가 결합된 새로운 토폴로지의 회로를 구성하였다. 제안된 컨버터의 동작원리 및 동작모드를 해석하고, PSpicc 시뮬레이션을 통해 해석결과를 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.362-365
• /
• 1999

In this paper, the method of reducing harmonics and correcting of power factor in single PWM converter associated with diode rectifier and boos converter is studied. The ac-dc converter in which the harmonic distortion in the input current is reduced using a third harmonic injected PWM is proposed. A lower switching power loss and easy configuration o control circuit are obtained by adopting discontinuous current mode. Simulation and experimental results of ac-dc converter with 5[KHz] switching frequency are presented and correction of power factor and reduction of total harmonic distortion was established.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.193-194
• /
• 2012

The bidirectional boost-buck chopper type AC voltage regulator is presented in this paper. The main characteristic of the AC chopper is the fact that it generates an output AC voltage larger or lower than the input AC one, depending of the instantaneous duty-cycle. Boost-buck chopper type AC voltage regulator, derived from the DC chopper modulated method, is a kind of direct AC-AC voltage converter and has many advantages: such as fast response speed, low harmonics and high power factor. It adopts high switching frequency AC chopper technique and can do wide range step less AC voltage regulation.