• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.49-53
• /
• 2006

A high temperature superconductor (HTS) has been developed for power applications such as power cables, fault current limiters and superconducting magnetic energy storage devices. For such applications it is required to understand the DC voltage-current characteristic of the HTS. which is important in analyzing AC loss and flux flow loss quantitatively. In this work, we have experimentally investigated influence of several factors, e.g. critical current density. degradation and AC external magnetic field, on the DC voltage-current characteristic. The measured results have been discussed in engineering application point of view.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.53-59
• /
• 2012

Adiabatic demagnetization refrigerator (ADR) for hydrogen re-liquefaction operating between 24 K and 20 K has been designed. $Dy_{0.9}Gd_{0.1}Ni_2$, whose Curie temperature is 24 K, is selected as a magnetic refrigerant. The magnetic refrigerant powder is sintered with oxygen-free high purity copper (OFHC) powder to enhance its effective thermal conductivity as well as to achieve relatively high frequency. A perforated plate heat exchanger (PPHE) operated with forced convection is utilized as a heat switch. The forced convection heat switch is expected to have fast response relative to a conventional gas-gap heat switch. A conduction-cooled high Tc superconducting (HTS) magnet is employed to apply external magnetic field variation on a magnetic refrigerant. $2^{nd}$ generation GdBCO coated conductor HTS tape with Kapton$^{(R)}$ insulation (SUNAM Inc.) will be utilized for the HTS magnet. The magnetization and demagnetization processes are to be achieved by the AC operation of the HTS magnet. The designed magnetic field and target ramp rate of the HTS magnet are over 4 T with 180 A and 0.4 T/s, respectively. AC loss distribution on HTS magnet is theoretically estimated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2251-2252
• /
• 1999

In this paper, the effect of magnetic field was measured on NOx removal characteristics for wire-plate plasma reactor with magnetic field applied to electric field vertically. NOx from simulated diesel engine flue gas are decomposed by the corona discharge of DC, AC and Pulsed voltages in wire-plate reactor. Consumption power increased with increasing discharge voltage. When magnetic field was applied to electric field vertically, consumption power decreased. NOx removal rate and arc transition voltage of plasma reactor with magnetic field were higher than those of plasma reactor without magnetic field.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.204-208
• /
• 2016

This paper demonstrates the key parameter detection for smelting of submerged arc furnace (SAF) based on magnetic field radiation. A magnetic field radiation model for the inner structure of SAF is established based on relative theory of electromagnetic field. A simple equipment of 3D magnetic field detection system is developed by theoretical derivation and simulation. The experiments are carried out under the environment of industrial field and AC magnetic field generated by electrode currents and molten currents in the furnace is reflected outside of the furnace. The experimental results show that the key parameters of smelting including the position of electrode tip, the length of electric arc, and the liquid level of molten bath can be achieved. The computed tomography for SAF can be realized by the detection for smelting.

• 한국광학회지
• /
• 제2권3호
• /
• pp.139-148
• /
• 1991

광섬유를 사용하여 미소 교류자기장 (200Hz-2kHz) 감지를 위한 광섬유 간섭계 자기센서시스템을 구성하였다. 자왜효과(magnetostriction effect)가 큰 비정질 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기(directional coupler)를 사용한 광섬유 일체식(all-fiber type)으로 Mach-Zehnder 간섭계를 구성하여 외부 자기장의 변화를 간섭계의 위상변화로 변환시켜 그 크기를 측정하였다. 온도변화, 진동 등 주위환경에서 오는 불규칙한 신호에 의한 간섭계의 신호소멸(signal fading) 문제는 능동 위상추적방법(active phase tracking method)으로 간섭계의 기준 광통로(reference arm)에 위치한 위상 변조기에 보상신호를 되먹임으로써, 직각조건(quadrature condition)을 이루어 안정시켰다. 측정 결과 metallic glass의 주파수 반응특성은 900Hz-2kHz 대역에서 거의 비슷한 경향을 보였으며 최대 감도를 나타내는 직류 바이어스 자기장은 3.5 Oe 였다. 미소 교류자기장에 대한 간섭계의 출력은 $\pm$0.5 Oe 범위 안에서 좋은 선형성을 보였다. 1 kHz 교류자기장에 대한 scale factor S는 8.0 rad/Oe 이었으며 최소감지자기장은 $3X10^{-6} Oe/\sqrt{Hz}$(1Hz detection bandwidth)이었다.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.215-222
• /
• 2009

Many concepts of external magnetic field applications in crystal growth processes have been developed to control melt convection, impurity content and growing interface shape. Especially, travelling magnetic fields (TMF) are of certain advantages. However, strong shielding effects appear when the TMF coils are placed outside the growth vessel. To achieve a solution of industrial relevance within the framework of the $KRISTMAG^{(R)}$ project inner heater-magnet modules(HMM) for simultaneous generation of temperature and magnetic field have been developed. At the same time, as the temperature is controlled as usual, e.g. by DC, the characteristics of the magnetic field can be adjusted via frequency, phase shift of the alternating current (AC) and by changing the amplitude via the AC/DC ratio. Global modelling and dummy measurements were used to optimize and validate the HMM configuration and process parameters. GaAs and Ge single crystals with improved parameters were grown in HMM-equipped industrial liquid encapsulated Czochralski (LEC) puller and commercial vertical gradient freeze (VGF) furnace, respectively. The vapour pressure controlled Czochralski (VCz) variant without boric oxide encapsulation was used to study the movement of floating particles by the TMF-driven vortices.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.1-7
• /
• 2006

This paper reviews AC loss characteristics of high $T_c$ superconductors. The mechanisms of AC loss generation are explained briefly, and AC losses are classified by the magnetic field components which generate them. A couple of analytical formulae of AC losses, which are useful for simple and rough AC loss estimations, are presented. AC loss characteristics of single BSCCO multifilamentary conductors and single YBCO coated conductors are reviewed based on previous experimental and numerical studies. AC loss characteristics of those two types of practical high $T_c$ superconductors are compared with each other.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.489-494
• /
• 2008

전기 및 전자 분야의 기술발전으로 인하여 전자기파에 의한 환경영향은 더욱 높아지고 있으며 다양한 시스템의 조합으로 운용되는 전기철도 분야에도 이러한 전자기파에 의한 환경영향이 안전의 측면에서 중요하게 논의되고 있다. 객실의 자계는 인체의 유해성 및 실내장치의 동작성능에 영향을 줄 수 있는 자계 강도를 확인하기 위하여 측정한다. 극저주파의 측정은 교류 25 kV로 급전 받아 운행되는 전기철도차량에서 실시하였으며, 전기철도차량의 주요 전장품(Converter/Inverter Box, 주변압기, 견인전동기, SIV)이 있는 위치에서 측정하였다. 측정된 결과는 컴퓨터를 통하여 FFT를 실시하였으며, 측정결과가 국내의 권고기준에 적합한지 여부를 확인하였다. 본 논문은 교류전원으로 운행되는 전기철도차량을 대상으로 하여 극저주파 자계를 측정하였다. 측정 결과, 최대 RMS값의 경우 C/I는 약 3.4 ${\mu}T$, 주변압기는 8.2 ${\mu}T$, 견인전동기가 24 ${\mu}T$, 보조전원장치가 24 ${\mu}T$로 나왔으며, 주파수 분석에 의한 결과 또한 기준값 이하로 나왔다. 모두 정통부 및 국제 위원회 등에서 고시하는 제한치내에 있는 것을 확인할 수 있었다. 그러나 아직까지 극저주파에 대한 인체에 미치는 영향이 과학적으로 규명되어 있지 않고, 개인마다 또는 여러 다른 환경적 요인들로 인해 정확히 전자파의 영향이라고 분리하기가 불가능한 실정이다. 향후 연구되는 결과들을 바탕으로 하여 자계 측정 방법 및 분석에 대한 연구가 이루어져야 할 것이다.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1268-1277
• /
• 2018

A relatively high operating frequency is required for efficient wireless power transfer (WPT). However, the alternating current (AC) resistance of coils increases sharply with operating frequency, which possibly degrades overall efficiency. Hence, the evaluation of coil AC resistance is critical in selecting operating frequency to achieve good efficiency. For a Litz wire coil, AC resistance is attributed to the magnetic field, which leads to the skin effect, the proximity effect, and the corresponding conductive resistance and inductive resistance in the coil. A numerical calculation method based on the Biot-Savart law is proposed to calculate magnetic field strength over strands in Litz wire planar spiral coils to evaluate their AC resistance. An optimized frequency can be found to achieve the maximum efficiency of a WPT system based on the predicted resistance. Sample coils are manufactured to verify the resistance analysis method. A prototype WPT system is set up to conduct the experiments. The experiments show that the proposed method can accurately predict the AC resistance of Litz wire planar spiral coils and the optimized operating frequency for maximum efficiency.

• 한국광학회지
• /
• 제4권4호
• /
• pp.474-479
• /
• 1993

Melt-spun법에 의해서 자왜특성을 갖는 Co-Fe-B ribbon을 제작한 후 광섬유 Mach-Zehnder 간섭계의 sensing-arm에 부착하여 간섭형 자계센서를 구성하였다. Co-Fe-B 자왜변환기로 구성된 자계센서의 동작실험 결과 ac 자왜 응답이 최대가 되는 dc 바이어스 자계는 출력이 0인 바이어스 지점으로부터 0.970e 정도 떨어져 있었으며, 최소 감지자장은 3kHz에서 3.9${\times}10^{-5}$ Oe(rms)/${\sqrt{Hz}}$였다. 응답이 최대가 되는 지점에 바이어스를 고정시켰을 때 ac 자계셈서의 출력이 포화되기 시작하는 입력 자계신호는 1 Oe(rms) 근처였다. Co-Fe-B 자왜변환기의 주파수 특성곡선에서 응답이 피크가 되는 주파수는 ~500Hz였다.